Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

add DM PCI support on the socrates board.
use PCIE_FSL now.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

switch to DM_SERIAL support.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

enable DM I2C support for the socrates board.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

disable video, as not really needed longer.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

add some defines and get rid of USB warning.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

enable CONFIG_DM for the socrates board.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

This board appears to be very near its size limit and cannot accept the
new checking code in libfdt. Disable this code so this the board can
continue to build.
Signed-off-by: NSimon Glass <sjg@chromium.org>

We have once again reached a point where this board does not build in
some cases with supported toolchains due to reaching a size constraint.
To regain some space, disable support for Plan 9 / RTEMS images with the
bootm command.
Acked-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>

We have once again reached a point where this board does not build in
some cases with supported toolchains due to reaching a size constraint.
To regain some space, disable support for Plan 9 / RTEMS images with the
bootm command.
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NStefano Babic <sbabic@denx.de>

Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0
Signed-off-by: NOliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>

This commit adds support for the brppt2 board. The board is based on the
i.mx6 dual-lite SoC.
Signed-off-by: NHannes Schmelzer <hannes.schmelzer@br-automation.com>

Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for
DRAM and linux suspend voltage requirement.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.
Reviewed-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com>

Migrate to DM_ETH and remove code that is no longer necessary.
Reviewed-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com>

This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings.  These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:

 * Keep the PSCI reserved memory range
 * Keep the alias for ethernet, so that the MAC address can be set
 * Keep the modified #include for the IOMUXC pins
Signed-off-by: NPatrick Wildt <patrick@blueri.se>
Acked-by: NPeng Fan <peng.fan@nxp.com>

After this change the SPL size has been reduced from 38K to 34K.
Signed-off-by: NLukasz Majewski <lukma@denx.de>

This commit enabled support for fitImage on mccmon6 when we
switch to DT/DTS (including falcon mode).
Signed-off-by: NLukasz Majewski <lukma@denx.de>

This commit converts mccmon6's u-boot proper (in a single commit to avoid
build breaks) to use solely DM/DTS.

The DTS description of the mccmon6 has been ported from Linux kernel
(v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be)
Signed-off-by: NLukasz Majewski <lukma@denx.de>

The TPC70 is equipped with DS1307 RTC device. Add code to enable support
for it.
Signed-off-by: NLukasz Majewski <lukma@denx.de>

Signed-off-by: NClaudius Heine <ch@denx.de>

After the following commit:
commit 772b5572 ("imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC
boot on falcon mode")
it is possible to set the CONFIG_SPL_FORCE_MMC_BOOT flag, which allows
using MMC device as boot device regardless of the device used by Boot ROM
(FBL) as the first boot medium.

Display5 board needs this flag set to allow falcon boot from eMMC device.
Signed-off-by: NLukasz Majewski <lukma@denx.de>

Signed-off-by: NEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

Somehow EMSDP & IoT DK boards were skipped on ARC boads conversion
to DM MMC. So doing it now.
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

Some especially large SD-cards come from stock formatted with
larger FAT cluster size so to accommodate those we just increase
what we expect to have here in U-Boot given we have a plenty of
space on EM SDP (16 MiB).
Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com>

Expand SPL_MULTI_DTB_FIT to accommodate usb peripheral nodes being
added to support SPL_DFU bootmode.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>

Enable configs for supporting SPL_DFU bootmode.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>

Some configs are selected in Kconfig and is no longer needed in the
defconfig files. Some configs (power domain, ram) are never used.
Signed-off-by: NWeijie Gao <weijie.gao@mediatek.com>

Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>

A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.

The Linux kernel upstream has chosen to create and use a separate device tree
for the eMMC variants instead of adding eMMC support existing device tree. These
changes to Linux kernel are queued for Linux 5.4.

commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts:
allwinner: a64: Add A64 OlinuXino board (with eMMC)")

This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux
device-tree and a64-olinuxino_defconfig.
Signed-off-by: NSunil Mohan Adapa <sunil@medhas.org>
[jagan: updated linux-next commit details]
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in
SPL. They often rely on hacks in the board header files to include
this option conditionally. To be able to fix this, we previously
introduced a separate option SPL_SPI_FLASH_MTD.

Therefore we can now adjust the Makefile and change the code in
sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD).

We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the
header files to the according defconfigs. The affected boards are
socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6
and da850evm.

We do this all in one patch to guarantee bisectibility.

This change was tested with buildman to make sure it does not
introduce any regressions by comparing the resulting binary sizes.
Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: NStefan Roese <sr@denx.de>
Reviewed-by: NSimon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

As SPI_FLASH_MTD is used in SPL and U-Boot proper, we enable both,
now that a separate option for SPL was introduced.
Signed-off-by: NFrieder Schrempf <frieder.schrempf@kontron.de>
[jagan: drop unrelated change]
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NLukasz Majewski <lukma@denx.de>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>

SoPine has winbond SPI-FLASH, so enable the same in defconfig
and add aliases for spi0 in -u-boot.dtsi
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>

Add support for System Controller available on e-a2197-00 base board.
System is very similar to p-a2197-00 board.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable the SPI flash Bank/Extended address register support for all ZynqMP
boards.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Mini u-boot should be really small that's why it is necessary to disable
all unneeded configs.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

board_early_init_f added by commit e6cc3b25
("arm: zynq: Wire watchdog internals") is no longer needed that's why
remove it also with Kconfig enabling.

Fixes: ccd063e9 ("watchdog: Move watchdog_dev to data section (BSS may not be cleared)")
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch removes 4K sector size support for Zynq mini qspi configuration
in favour of fast erase speed.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch removes 4K sector size support for ZynqMP mini qspi
configuration in favour of fast erase speed.
Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch enables Micrel phy support for Xilinx ZynqMP zc1275
revB board.
Signed-off-by: NSiva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>