configs: dra7xx_evm: Add Kconfigs for SPL_DFU bootmode

Enable configs for supporting SPL_DFU bootmode.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NJean-Jacques Hiblot <jjhiblot@ti.com>

configs/dra7xx_evm_defconfig

@@ -25,8 +25,11 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 CONFIG_CMD_SPL=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
@@ -85,6 +88,7 @@ CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
 CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
@@ -107,7 +111,9 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451

configs/dra7xx_hs_evm_defconfig

@@ -30,8 +30,11 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 # CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_NAND=y
 CONFIG_CMD_MTDPARTS=y
@@ -88,6 +91,7 @@ CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
 CONFIG_SPL_PHY=y
 CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
 CONFIG_OMAP_USB2_PHY=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_PMIC_LP873X=y
@@ -110,7 +114,9 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_OMAP=y
 CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_DWC3_PHY_OMAP=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451