Rsync all defconfig files using moveconfig.py
Signed-off-by: NTom Rini <trini@konsulko.com>

- mpc85xx, socrates: Add dts, enable DM support, fix warnings, disable
  video

- Re-enable LLVM tests in Travis and add them to GitLab and Azure

Now that we have again fixed the problems that building with clang
exposes, enable these tests on Azure and GitLab-CI as well.
Signed-off-by: NTom Rini <trini@konsulko.com>

When using the OVERRIDE variable we need to pass -O to buildman as well
to use the "override" option to buildman.

Fixed: e9500f49 ("travis: Use buildman for building with clang")
Signed-off-by: NTom Rini <trini@konsulko.com>

Newer versions of LLVM-7 will provide an unused function warning over
console_doenv() in the case of SYS_CONSOLE_IS_IN_ENV not being enabled
as can be the case in SPL.  Add guards around this function.
Signed-off-by: NTom Rini <trini@konsulko.com>

imx targets are defined in arch/arm/mach-imx/Makefile.
Some of them are dependent on targets defined in main
Makefile. For the Makefile in arch/arm/mach-imx this
targets must be finished before the imx targets are
build, if not you get for example the error:

make -f /home/hs/abb/mainlining/u-boot/scripts/Makefile.build obj=arch/arm/mach-imx u-boot-dtb.imx
make[2]: *** No rule to make target 'u-boot-fit-dtb.bin', needed by 'u-boot-dtb.imx'.  Stop.
make[1]: *** [/home/hs/abb/mainlining/u-boot/Makefile:1123: u-boot-dtb.imx] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/work/hs/compile/u-boot/aristainetos2_defconfig'
make: *** [Makefile:148: sub-make] Error 2
compile failed

In above case of CONFIG_MULTI_DTB_FIT is defined, the
u-boot-dtb.imx is dependent on the u-boot-fit-dtb.bin
which may is not build yet ...

I could reproduce this error on a travis build also if
I build an out-of-tree build on a local machine with a
build directory on a "slow" slow storage device. If
building the same source target with a build dir on a
fast storage device, the build works.

I found no solution to tell the arch/arm/mach-imx/Makefile
to find the targets in main Makefile, if there is a way
this would be the better fix.

I solved it by adding a IMX_DEPS var, which holds a list
of main u-boot targets, which must be finished, before
calling imx targets and fixed the build for imx
targets which enabled CONFIG_MULTI_DTB_FIT.

I think it is just luck, that imx targets with
CONFIG_OF_SEPARATE enabled build, because the
u-boot-dtb.imx target depends on u-boot-dtb.bin
which gets build early enough before starting with
u-boot-dtb.imx. May this targets should be fixed too.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NTom Rini <trini@konsulko.com>

- DFU updates
- USB Storage updates

- fsl_esdhc driver cleanup
- fsl_esdhc_imx driver improvement and compatible string update

add DM PCI support on the socrates board.
use PCIE_FSL now.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

switch to DM_SERIAL support.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

enable DM I2C support for the socrates board.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

disable video, as not really needed longer.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

add some defines and get rid of USB warning.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

enable CONFIG_DM for the socrates board.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

add u-boot specific dtsi file for socrates board.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

add socrates device tree from linux:

commit 71ae5fc87c34 ("Merge tag 'linux-kselftest-5.2-rc1' of
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest")

and added SPDX license identifier.
Did not fix checkpatch warnings:
arch/powerpc/dts/socrates.dts:235: check: Please don't use multiple blank lines
arch/powerpc/dts/socrates.dts:238: error: code indent should use tabs where possible

Also, add me as board maintainer.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

suppress warning:
Flash: ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

add DM based PCI Configuration space access support for
MPC85xx PCI Bridge. This driver is based on
arch/powerpc/cpu/mpc85xx/pci.c

In the old driver there is a fix for a hw issue on the
TARGET_MPC8555CDS and TARGET_MPC8541CDS boards. As I
have no such hardware I did not port this part.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPriyanka Jain <priyanka.jain@nxp.com>

With python3 we're now tripping over a long-standing problem with how we
add to the buildman file with some toolchains.  We cannot have multiple
toolchain-alias sections as that leads to a parse error.
Signed-off-by: NTom Rini <trini@konsulko.com>

Update to latest libfdt and pylibfdt, with added size control
Update binman, dtoc, patman, buildman to Python 3
Update move_config, rkmux, microcode_tool to Python 3

To enable HS400(ES) and UHS for imx8m platforms, update the driver data
to share with imx8qm esdhc_soc_data.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

During mmc initialization, there are several calls to mmc_set_clock
and mmc_set_ios. When mmc_power_off, the mmc->clock will be set,
but the imx driver will use 400KHz. So the following calls
to mmc_set_ios will set the clock several times which is redundant
in fsl_esdhc_imx driver. So let's simplify to remove redundant
clock settings.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>

Make DM and non-DM code clear using below structure.
	#if !CONFIG_IS_ENABLED(DM_MMC)
		<non-DM_MMC code>
	#else
		<DM_MMC code>
	#endif
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

The QorIQ eSDHC on all platforms supports checking write protect
state through register bit. So check it always.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

Drop redundant code for non-removable feature. "non-removable" property
has been read in mmc_of_parse().
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

The fsl_esdhc_init() was actually to get configuration of mmc_config.
So rename it to fsl_esdhc_get_cfg_common() and make it common for both
DM_MMC and non-DM_MMC.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

This patch is to clean up bus width setting code.

- For DM_MMC, remove getting "bus-width" from device tree.
  This has been done in mmc_of_parse().

- For non-DM_MMC, move bus width configuration from fsl_esdhc_init()
  to fsl_esdhc_initialize() which is non-DM_MMC specific.
  And fix up bus width configuration to support only 1-bit, 4-bit,
  or 8-bit. Keep using 8-bit if it's not set because many platforms
  use driver without providing max bus width.

- Remove bus_width member from fsl_esdhc_priv structure.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

Voltage validation should be done by CMD8. Current comparison between
mmc_cfg voltages and host voltage capabilities is meaningless.
So drop current comparison and let voltage validation is through CMD8.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

Controller initialization is not needed in fsl_esdhc_init().
It will be done in esdhc_init() for non-DM_MMC, and in
esdhc_init_common() in probe for DM_MMC.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>

Update this tool to use Python 3 to meet the 2020 deadline.

Unfortunately this introduces a test failure due to a problem in pylibfdt
on Python 3. I will investigate.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Drop the now-unused Python 2 code to keep code coverage at 100%.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Some tests have crept in with Python 2 strings and constructs. Convert
then.
Signed-off-by: NSimon Glass <sjg@chromium.org>

When preparing to possible expand or contract an entry we reset the size
to the original value from the binman device-tree definition, which is
often None.

This causes binman to forget the original size of the entry. Remember this
so that it can be used when needed.
Signed-off-by: NSimon Glass <sjg@chromium.org>

This function should use a void * type, not char *. This causes an error:

TypeError: in method 'fdt_property_stub', argument 3 of type 'char const *'

Fix it.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Sync up the libfdt Python bindings with upstream, commit:

430419c (tests: fix some python warnings)
Signed-off-by: NSimon Glass <sjg@chromium.org>

Build this swig module with Python 3.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Convert this tool to Python 3 and make it use that, to meet the 2020
deadline.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Convert this tool to Python 3 and make it use that, to meet the 2020
deadline.
Signed-off-by: NSimon Glass <sjg@chromium.org>

Convert this tool to Python 3 and make it use that, to meet the 2020
deadline.
Signed-off-by: NSimon Glass <sjg@chromium.org>