提交 5705973b 编写于 作者: Y Yangbo Lu 提交者: Peng Fan

mmc: fsl_esdhc: convert to use fsl_esdhc_get_cfg_common()

The fsl_esdhc_init() was actually to get configuration of mmc_config.
So rename it to fsl_esdhc_get_cfg_common() and make it common for both
DM_MMC and non-DM_MMC.
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
上级 07bae1de
......@@ -678,23 +678,12 @@ static const struct mmc_ops esdhc_ops = {
};
#endif
static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
struct fsl_esdhc_plat *plat)
static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
struct mmc_config *cfg)
{
struct mmc_config *cfg;
struct fsl_esdhc *regs;
struct fsl_esdhc *regs = priv->esdhc_regs;
u32 caps;
if (!priv)
return -EINVAL;
regs = priv->esdhc_regs;
cfg = &plat->cfg;
#ifndef CONFIG_DM_MMC
memset(cfg, '\0', sizeof(*cfg));
#endif
caps = esdhc_read32(&regs->hostcapblt);
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
......@@ -710,19 +699,13 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv,
cfg->voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->name = "FSL_SDHC";
#if !CONFIG_IS_ENABLED(DM_MMC)
cfg->ops = &esdhc_ops;
#endif
if (caps & HOSTCAPBLT_HSS)
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
cfg->f_min = 400000;
cfg->f_max = min(priv->sdhc_clk, (u32)200000000);
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
return 0;
}
#if !CONFIG_IS_ENABLED(DM_MMC)
......@@ -732,7 +715,6 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
struct fsl_esdhc_priv *priv;
struct mmc_config *mmc_cfg;
struct mmc *mmc;
int ret;
if (!cfg)
return -EINVAL;
......@@ -769,20 +751,15 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
mmc_cfg->host_caps &= ~MMC_MODE_8BIT;
#endif
ret = fsl_esdhc_init(priv, plat);
if (ret) {
debug("%s init failure\n", __func__);
free(plat);
free(priv);
return ret;
}
mmc_cfg->ops = &esdhc_ops;
fsl_esdhc_get_cfg_common(priv, mmc_cfg);
mmc = mmc_create(&plat->cfg, priv);
mmc = mmc_create(mmc_cfg, priv);
if (!mmc)
return -EIO;
priv->mmc = mmc;
return 0;
}
......@@ -927,11 +904,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
}
}
ret = fsl_esdhc_init(priv, plat);
if (ret) {
dev_err(dev, "fsl_esdhc_init failure\n");
return ret;
}
fsl_esdhc_get_cfg_common(priv, &plat->cfg);
mmc_of_parse(dev, &plat->cfg);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册