- 04 6月, 2016 1 次提交
-
-
由 Masahiro Yamada 提交于
Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
- 28 5月, 2016 1 次提交
-
-
由 Alexander Graf 提交于
We know for certain that we have 32bit DMA hardware, but 64bit addresses on LS2085A and ZynqMP, so let's enable EFI bounce buffers for all defconfigs on these SoCs. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 24 5月, 2016 3 次提交
-
-
由 Michal Simek 提交于
ZynqMP is using fixed clocks now that's why enabling it to be available for drivers. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Add missing SPI flash options. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
It has to be enabled by debug_uart_init(). Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 26 4月, 2016 2 次提交
-
-
由 Tom Rini 提交于
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 20 4月, 2016 4 次提交
-
-
由 Sam Protsenko 提交于
And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Sam Protsenko 提交于
Description was borrowed from kernel dwc3 Kconfig. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Sam Protsenko 提交于
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Sam Protsenko 提交于
Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
- 14 4月, 2016 4 次提交
-
-
由 Michal Simek 提交于
Use i2c cadence DM driver for all zynqmp targets except ZCU102 because I2C muxes and PCA953x are not supported in the tree yet. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NHeiko Schocher <hs@denx.de>
-
由 Michal Simek 提交于
Enable missing GPIO options. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
DM drivers need more malloc space for early DM models allocation. Use 4k instead of 1k. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
There are mini configurations which need to be fit to OCM that's why these options shouldn't be enabled by default. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 05 4月, 2016 2 次提交
-
-
由 Michal Simek 提交于
Simplify board config file. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
This option enable adding new platform suport just by adding defconfig and DTS file which will target generic configuration for SoC. Make no sense to extend Kconfig just create a pointer between DTS and configuration file. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 26 3月, 2016 1 次提交
-
-
由 Sam Protsenko 提交于
The description was borrowed from kernel. "tristate" type was changed to "bool" (I believe we don't support modules for u-boot yet, right?). CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along as well. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org> [trini: Add zynq_zc702 conversion] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 23 3月, 2016 1 次提交
-
-
由 Bin Meng 提交于
Some boards' defconfig files are out of order. Clean this up. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NJoe Hershberger <joe.hershberger@ni.com>
-
- 22 2月, 2016 1 次提交
-
-
由 Michal Simek 提交于
Add Arasan SDHCI entry to Kconfig and fix all references. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 13 2月, 2016 1 次提交
-
-
Add nand driver support for zynqmp. The Nand controller used in ZynqMP is Arasan Nand Flash controller. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> [scottwood: Fix checkpatch warning] Signed-off-by: NScott Wood <oss@buserror.net>
-
- 07 12月, 2015 2 次提交
-
-
由 Michal Simek 提交于
Remove configuration options from board file. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NJagan Teki <jteki@openedev.com>
-
- 04 11月, 2015 1 次提交
-
-
由 Michal Simek 提交于
SPI requires DM and OF that's why enable DM for ZynqMP and start to use configuration based on embedded OF. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
- 19 8月, 2015 3 次提交
-
-
由 Michal Simek 提交于
We have to set a MAC address to use network. Otherwise, the tftpboot command fails with the following message: Gem.e000b000 Waiting for PHY auto negotiation to complete........ done *** ERROR: `ethaddr' not set Since commit 92ac5208 ("net: Remove all references to CONFIG_ETHADDR and friends"), we can not use CONFIG_ETHADDR. The easiest way to set a MAC address is to enable CONFIG_NET_RANDOM_ETHADDR. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Added usb dwc3 driver support for zynqmp this also supports the DFU and LTHOR to download the linux images on to RAM and cen be booted from those linux images. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
Enable networking for EP108 by default. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 13 8月, 2015 1 次提交
-
-
由 Nikita Kiryanov 提交于
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: NNikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 28 7月, 2015 2 次提交
-
-
Move CONFIG_SYS_TEXT_BASE of ZynqMP_ep to its respective defconfig Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
Define a new config "zynqmp_ep" for ZynqMP instead of xilinx_zynqmp. This defconfig supports all emulation platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP to ARCH_ZYNQMP. Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
- 26 6月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: NTom Rini <trini@konsulko.com>
-
- 13 5月, 2015 1 次提交
-
-
由 Joe Hershberger 提交于
In order to reduce merge conflicts and to maintain the simplest possible defconfig files, we should be using the savedefconfig feature of Kconfig every time a new feature is added. This keeps the defconfig settings to a minimum (only those things not default) and keeps them in the same order as the Kconfig options. Signed-off-by: NJoe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
-
- 03 3月, 2015 1 次提交
-
-
由 Michal Simek 提交于
Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-