zynqmp: Define ep config for ZynqMP

Define a new config "zynqmp_ep" for ZynqMP instead
of xilinx_zynqmp. This defconfig supports all emulation
platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP
to ARCH_ZYNQMP.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

arch/arm/Kconfig

@@ -681,7 +681,7 @@ config ARCH_ZYNQ
 	select DM_SPI
 	select DM_SPI_FLASH
 
-config TARGET_XILINX_ZYNQMP
+config ARCH_ZYNQMP
 	bool "Support Xilinx ZynqMP Platform"
 	select ARM64
 

arch/arm/cpu/armv8/Makefile

@@ -16,4 +16,4 @@ obj-y	+= tlb.o
 obj-y	+= transition.o
 
 obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
-obj-$(CONFIG_TARGET_XILINX_ZYNQMP) += zynqmp/
+obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/

arch/arm/cpu/armv8/zynqmp/Kconfig

-if TARGET_XILINX_ZYNQMP
+if ARCH_ZYNQMP
+
+choice
+	prompt "Xilinx ZynqMP board select"
+
+config TARGET_ZYNQMP_EP
+	bool "ZynqMP EP Board"
+
+endchoice
 
 config SYS_BOARD
 	default "zynqmp"
@@ -10,6 +18,6 @@ config SYS_SOC
 	default "zynqmp"
 
 config SYS_CONFIG_NAME
-	default "xilinx_zynqmp"
+	default "xilinx_zynqmp_ep" if TARGET_ZYNQMP_EP
 
 endif

board/xilinx/zynqmp/MAINTAINERS

-XILINX_ZYNQMP BOARD
+XILINX_ZYNQMP_EP BOARD
 M:	Michal Simek <michal.simek@xilinx.com>
 S:	Maintained
 F:	board/xilinx/zynqmp/
 F:	include/configs/xilinx_zynqmp.h
-F:	configs/xilinx_zynqmp_defconfig
+F:	include/configs/xilinx_zynqmp_ep.h
+F:	configs/xilinx_zynqmp_ep_defconfig

configs/xilinx_zynqmp_defconfig → configs/xilinx_zynqmp_ep_defconfig

 CONFIG_ARM=y
-CONFIG_TARGET_XILINX_ZYNQMP=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep"
 # CONFIG_CMD_CONSOLE is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set

include/configs/xilinx_zynqmp.h

@@ -53,7 +53,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x400000)
 
 /* Serial setup */
-#define CONFIG_ZYNQ_SERIAL_UART0
 #define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX		0
@@ -61,8 +60,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_ZYNQ_SDHCI0
-
 /* Command line configuration */
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_EXT2
@@ -127,9 +124,6 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS		64
 
-#define CONFIG_ZYNQ_I2C0
-#define CONFIG_SYS_I2C_ZYNQ
-
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_CMD_I2C
@@ -138,8 +132,6 @@
 # define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
 #endif
 
-#define CONFIG_ZYNQMP_EEPROM
-
 /* EEPROM */
 #ifdef CONFIG_ZYNQMP_EEPROM
 # define CONFIG_CMD_EEPROM

include/configs/xilinx_zynqmp_ep.h

+/*
+ * Configuration for Xilinx ZynqMP emulation
+ * platforms. See zynqmp-common.h for ZynqMP
+ * common configs
+ *
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
+ *
+ * Based on Configuration for Versatile Express
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_EP_H
+#define __CONFIG_ZYNQMP_EP_H
+
+#define CONFIG_ZYNQ_SERIAL_UART0
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_SYS_I2C_ZYNQ
+#define CONFIG_ZYNQ_EEPROM
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_EP_H */