Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Because the command line definitions of OPENSSLDIR and ENGINESDIR
contain quotes, we need a variant of CFLAG where backslashes and
quotes are escaped when we produce buildinf.h
Reviewed-by: NRich Salz <rsalz@openssl.org>

As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output.  mkdef.pl should ONLY output a symbol
vector.

Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC.  To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.

Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:

    @config
Reviewed-by: NRich Salz <rsalz@openssl.org>

Cygwin and Mingw name their libraries a bit differently from the rest
of the POSIXly universe, we need to adapt to that.

In Makefile.tmpl, it means that some hunks will only be output
conditionally.

This also means that shared_extension for the Cygwin and Mingw
configurations in Configurations/10-main.conf are changing from .dll.a
to .dll.  Makefile.shared does a fine job without having them
specified, and it's much easier to work with tucking an extra .a at
the end of files in the installation recipes than any amount of name
rewrites, especially with the support of the SHARED_NAME in the top
build.info.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This also adds all the raw sections needed for some files.
Reviewed-by: NRich Salz <rsalz@openssl.org>

With some compilers, C macros are defined differently on the command
line than on Unix.  It could be that the flad to define them isn't -D,
it could also be that they need to be grouped together and not be mixed
in with the other compiler flags (that's how it's done on VMS, for
example).

On Unix family platform configurations, we can continue to have macro
definitions mixed in with the rest of the flags, so the changes in
Configurations/*.conf are kept to an absolute minimum.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

This documents describes the three steps from build.info files via the
%unified_info database to the build-file templates, along with some
examples showing how the data gets processed along the way.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

common.tmpl will be used together with the template build file, and is
the engine that connects the information gathered from all the
build.info files with making the build file itself.

This file expects there to be a template section in the build file
template that defines a number perl functions designed to return
strings with appropriate lines for the build system at hand.  The
exact functions, what they can expect as arguments and what output
they're expected to produce is documented in Configurations/README.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs.  These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.

Unfortunately, that conclusion wasn't entirely accurate.  Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.

Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.

Also, documentation is changed in Configurations/README.  This was
previously forgotten.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Nothing else will run the unified scheme for now.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The "unified" build scheme revolves around small information files,
build.info, which each describe their own bit of everything that needs
to be built, using a mini-language described in Configurations/README.

The information in build.info file contain references to source files
and final result.  Object files are not mentioned at all, they are
simply from source files.  Because of this, all the *_obj items in
Configurations/*.conf are renamed to *_asm_src and the files listed
in the values are change from object files to their corresponding
source files.  For the sake of the other build schemes, Configure
generates corresponding *_obj entries in %target.

Furthermore, the "unified" build scheme supports having a build
directory tree separate from the source directry tree.

All paths in a build.info file is assumed to be relative to its
location, either within the source tree or within the build tree.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Some last lflags to convert to ex_libs or a combo of lflags and ex_libs
Reviewed-by: NRich Salz <rsalz@openssl.org>

The lflags configuration had a weird syntax with a % as separator.  If
it was present, whatever came before ended up as PEX_LIBS in Makefile
(usually, this is LDFLAGS), while whatever came after ended up as
EX_LIBS.

This change splits that item into lflags and ex_libs, making their use
more explicit.

Also, PEX_LIBS in all the Makefiles are renamed to LDFLAGS.
Reviewed-by: NRich Salz <rsalz@openssl.org>

A few more sub-joins could be replaced with calls to add() and add_before()
Reviewed-by: NRich Salz <rsalz@openssl.org>

The use of the uninitialized buffer in the RNG has no real security
benefits and is only a nuisance when using memory sanitizers.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

This is a followin from !1738, we no longer need those variables.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Many options for supporting optimizations for legacy crypto on legacy
platforms have been removed.  This simplifies the source code and
does not really penalize anyone.
        DES_PTR (always on)
        DES_RISC1, DES_RISC2 (always off)
        DES_INT (always 'unsigned int')
        DES_UNROLL (always on)
        BF_PTR (always on) BF_PTR2 (removed)
        MD2_CHAR, MD2_LONG (always 'unsigned char')
        IDEA_SHORT, IDEA_LONG (always 'unsigned int')
        RC2_SHORT, RC2_LONG (always 'unsigned int')
        RC4_LONG (only int and char (for assembler) are supported)
        RC4_CHUNK (always long), RC_CHUNK_LL (removed)
        RC4_INDEX (always on)
And also make D_ENCRYPT macro more clear (@appro)

This is done in consultation with Andy.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

- Small rearrangement of the TABLE and HASH printouts, and adding
  printout of the "build_scheme" item
- Renamed "engines_obj" to "padlock_obj"
- Moved the runs of dofile down...  it didn't quite make sense to have
  that in the middle of a printout
Reviewed-by: NRich Salz <rsalz@openssl.org>

It is time for Makefile.org to fold into the new regime and have a run
through util/dofile.pl.  This forces some information out of there and
into Configure, which isn't a bad thing, it makes Configure
increasingly the center of build information, which is as it should
be.

A few extra defaults were needed in the BASE template to get rid of
warnings about missing values.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Time to get rid of @MK1MF_Builds and introduce a more flexible
'build_scheme' configuration key.  Its value may be a string or an
array of strings, meaning we need to teach resolve_config how to
handle ARRAY referenses.

The build scheme is a word that selects a function to create the
appropriate result files for a certain configuration.  Currently valid
build schemes aer "mk1mf" and "unixmake", the plan is however to add
at least one other for a more universal build scheme.

Incidently, this also adds the functions 'add' and 'add_before', which
can be used in a configuration, so instead of having to repeatedly
write a sub like this:

	key1 => sub { join(" ", @_, "myvalues"); },
	key2 => sub { join(" ", "myvalues", @_); },

one could write this:

	key1 => add(" ", "myvalues"),
	key2 => add_before(" ", "myvalues"),

The good point with 'add' and 'add_before' is that they handle
inheritances where the values are a misture of scalars and ARRAYs.  If
there are any ARRAY to be found, the resulting value will be an ARRAY,
otherwise it will be a scalar with all the incoming valued joined
together with the separator given as first argument to add/add_before.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Move the documentation of the target configuration form to
Configurations/README.

Move initial assembler object templates to
Configurations/00-BASE-templates.conf.

Furthermore, remove all variables containing the names of the
non-assembler object files and make a BASE template of them instead.
The  values from this templates are used as defaults as is.  The
remaining manipulation of data when assembler modules are used is done
only when $no_asm is false.

While doing this, clean out some other related variables that aren't
used anywhere.

Also, we had to move the resolution of the chosen target a bit, or the
function 'asm' would never catch a true $no_asm...  this hasn't
mattered before we've moved it all to the BASE template, but now it
does.

At the same time, add the default for the 'unistd' key to the BASE
template.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Cygwin was used for x86 before, so let's keep it around for those who
still use it (it make Configure reconf possible).
Cygwin-i[3456]86 for those that might generate and pass a target name
directly to Configure.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This is to reflect that it's not limited to just i686.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This patch allows to recognize the architectures supported by Cygwin
and to choose the right configuration from there.  Drop -march to
use default architecture on 32 bit x86.

Drop pre-Cygwin-1.3 recognition since it's long gone and there's no
valid configuration for this anymore.
Signed-off-by: NCorinna Vinschen <vinschen@redhat.com>
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also always abort() on leak failure.
Reviewed-by: NStephen Henson <steve@openssl.org>

Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
        (Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Triggered by RT#4144.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Encourages GitHub to perform proper syntax highlighting.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>