Small cleanups in Configure

- Small rearrangement of the TABLE and HASH printouts, and adding
  printout of the "build_scheme" item
- Renamed "engines_obj" to "padlock_obj"
- Moved the runs of dofile down...  it didn't quite make sense to have
  that in the middle of a printout
Reviewed-by: NRich Salz <rsalz@openssl.org>

Configurations/00-base-templates.conf

@@ -15,7 +15,7 @@
 	wp_obj		=> "wp_block.o",
 	cmll_obj	=> "camellia.o cmll_misc.o cmll_cbc.o",
 	modes_obj	=> "",
-	engines_obj	=> "",
+	padlock_obj	=> "",
 	chacha_obj	=> "chacha_enc.o",
 	poly1305_obj	=> "",
 
@@ -43,7 +43,7 @@
 	wp_obj		=> "wp_block.o wp-mmx.o",
 	cmll_obj	=> "cmll-x86.o",
 	modes_obj	=> "ghash-x86.o",
-	engines_obj	=> "e_padlock-x86.o"
+	padlock_obj	=> "e_padlock-x86.o"
     },
     x86_elf_asm => {
 	template	=> 1,
@@ -62,7 +62,7 @@
 	wp_obj          => "wp-x86_64.o",
 	cmll_obj        => "cmll-x86_64.o cmll_misc.o",
 	modes_obj       => "ghash-x86_64.o aesni-gcm-x86_64.o",
-	engines_obj     => "e_padlock-x86_64.o"
+	padlock_obj     => "e_padlock-x86_64.o"
     },
     ia64_asm => {
 	template	=> 1,

Configurations/90-team.conf

@@ -82,7 +82,7 @@
         rc5_obj          => "rc5-586.o",
         wp_obj           => "wp_block.o wp-mmx.o",
         modes_obj        => "ghash-x86.o",
-        engines_obj      => "e_padlock-x86.o",
+        padlock_obj      => "e_padlock-x86.o",
         perlasm_scheme   => "elf",
         dso_scheme       => "dlfcn",
         shared_target    => "linux-shared",

Configurations/README

@@ -225,7 +225,7 @@ In each table entry, the following keys are significant:
                            Defaults to 'camellia.o cmll_misc.o cmll_cbc.o'
         modes_obj       => assembler implementation of the
                            functions gcm_gmult_4bit and gcm_ghash_4bit.
-        engines_obj     => assembler implementation of core parts of
+        padlock_obj     => assembler implementation of core parts of
                            the padlock engine.  This is mandatory on
                            any platform where the padlock engine might
                            actually be built.
@@ -293,4 +293,4 @@ Historically, the target configurations came in form of a string with
 values separated by colons.  This use is deprecated.  The string form
 looked like this:
 
-   "target" => "{cc}:{cflags}:{unistd}:{thread_cflag}:{sys_id}:{lflags}:{bn_ops}:{cpuid_obj}:{bn_obj}:{ec_obj}:{des_obj}:{aes_obj}:{bf_obj}:{md5_obj}:{sha1_obj}:{cast_obj}:{rc4_obj}:{rmd160_obj}:{rc5_obj}:{wp_obj}:{cmll_obj}:{modes_obj}:{engines_obj}:{perlasm_scheme}:{dso_scheme}:{shared_target}:{shared_cflag}:{shared_ldflag}:{shared_extension}:{ranlib}:{arflags}:{multilib}"
+   "target" => "{cc}:{cflags}:{unistd}:{thread_cflag}:{sys_id}:{lflags}:{bn_ops}:{cpuid_obj}:{bn_obj}:{ec_obj}:{des_obj}:{aes_obj}:{bf_obj}:{md5_obj}:{sha1_obj}:{cast_obj}:{rc4_obj}:{rmd160_obj}:{rc5_obj}:{wp_obj}:{cmll_obj}:{modes_obj}:{padlock_obj}:{perlasm_scheme}:{dso_scheme}:{shared_target}:{shared_cflag}:{shared_ldflag}:{shared_extension}:{ranlib}:{arflags}:{multilib}"

Configure

@@ -1346,25 +1346,14 @@ print "SHA1_OBJ_ASM  =$target{sha1_obj}\n";
 print "RMD160_OBJ_ASM=$target{rmd160_obj}\n";
 print "CMLL_ENC      =$target{cmll_obj}\n";
 print "MODES_OBJ     =$target{modes_obj}\n";
-print "ENGINES_OBJ   =$target{engines_obj}\n";
+print "PADLOCK_OBJ   =$target{padlock_obj}\n";
 print "CHACHA_ENC    =$target{chacha_obj}\n";
 print "POLY1305_OBJ  =$target{poly1305_obj}\n";
 print "PROCESSOR     =$config{processor}\n";
 print "RANLIB        =$target{ranlib}\n";
 print "ARFLAGS       =$target{arflags}\n";
 print "PERL          =$config{perl}\n";
-
-run_dofile("$Makefile.in","$Makefile");
-
-run_dofile("include/openssl/opensslconf.h.in", "include/openssl/opensslconf.h");
-
-foreach my $alg ( 'bf', 'bn', 'des', 'rc4' ) {
-    run_dofile("crypto/include/internal/${alg}_conf.h.in",
-	       "crypto/include/internal/${alg}_conf.h");
-}
-
-# Fix the date
-
+print "\n";
 print "SIXTY_FOUR_BIT_LONG mode\n" if $config{b64l};
 print "SIXTY_FOUR_BIT mode\n" if $config{b64};
 print "THIRTY_TWO_BIT mode\n" if $config{b32};
@@ -1386,6 +1375,15 @@ print "RC2 uses $config{rc2_int}\n" if $config{rc2_int} != $def_int;
 print "BF_PTR used\n" if $config{bf_ptr} == 1;
 print "BF_PTR2 used\n" if $config{bf_ptr} == 2;
 
+run_dofile("$Makefile.in","$Makefile");
+
+run_dofile("include/openssl/opensslconf.h.in", "include/openssl/opensslconf.h");
+
+foreach my $alg ( 'bf', 'bn', 'des', 'rc4' ) {
+    run_dofile("crypto/include/internal/${alg}_conf.h.in",
+	       "crypto/include/internal/${alg}_conf.h");
+}
+
 # Copy all Makefile.in to Makefile (except top-level)
 use File::Find;
 use IO::File;
@@ -1769,13 +1767,14 @@ sub print_table_entry
     return if $target{template};
 
     my @sequence = (
+	"sys_id",
 	"cc",
 	"cflags",
 	"debug_cflags",
 	"release_cflags",
-	"unistd",
 	"thread_cflag",
-	"sys_id",
+	"unistd",
+	"ld",
 	"lflags",
 	"debug_lflags",
 	"release_lflags",
@@ -1795,16 +1794,20 @@ sub print_table_entry
 	"wp_obj",
 	"cmll_obj",
 	"modes_obj",
-	"engines_obj",
+	"padlock_obj",
 	"perlasm_scheme",
 	"dso_scheme",
 	"shared_target",
 	"shared_cflag",
 	"shared_ldflag",
 	"shared_extension",
+	"obj_extension",
+	"exe_extension",
 	"ranlib",
+	"ar",
 	"arflags",
 	"multilib",
+	"build_scheme",
 	);
 
     if ($type eq "TABLE") {