- 18 11月, 2013 2 次提交
-
-
由 Yang Feng 提交于
Fix a typo in netperf result
-
由 Amos Kong 提交于
We compute rpkt_per_exit by tx_pkts, and compute tpkt_per_exit by rx_pkts. It's wrong. Signed-off-by: NAmos Kong <akong@redhat.com>
-
- 15 11月, 2013 3 次提交
-
-
由 Chris Evich 提交于
Signed-off-by: NChris Evich <cevich@redhat.com>
-
由 Yu Mingfei 提交于
Signed-off-by: NYu Mingfei <yumingfei@cn.fujitsu.com>
-
由 Yu Mingfei 提交于
Signed-off-by: NYu Mingfei <yumingfei@cn.fujitsu.com>
-
- 14 11月, 2013 5 次提交
-
-
由 Lucas Meneghel Rodrigues 提交于
qemu.tests: correct test step
-
由 Lucas Meneghel Rodrigues 提交于
Fix for next branch - Update5
-
由 Xu Tian 提交于
for this test we need to compare images when vm is in paused status; Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Feng Yang 提交于
Add a useless parameter in device_add_block(). These two function called by following code: try: # get function for adding device. add_fuction = local_functions["%s_%s" % (cmd_type, pci_type)] except Exception: raise error.TestError("No function for adding '%s' dev with '%s'" % (pci_type, cmd_type)) after_add = None if add_fuction: # Do add pci device. after_add = add_fuction(pci_num, queues) So they must have same parameters. Now we meet error: TypeError: device_add_block() takes exactly 1 argument (2 given) Signed-off-by: NFeng Yang <fyang@redhat.com>
-
由 Feng Yang 提交于
After some updating, current code could not get correct qemu binary. So Case error with message "TestNAError: Host qemu does not support qmp". Signed-off-by: NFeng Yang <fyang@redhat.com>
-
- 13 11月, 2013 3 次提交
-
-
由 Lucas Meneghel Rodrigues 提交于
We had a bunch of pull requests that were generated incorrectly against master, and were pushed, since it is way too easy to miss that fact when pressing the nice little green buttons that github offers. So we have to do this to avoid non ff updates to next and even more confusion. Signed-off-by: NLucas Meneghel Rodrigues <lmr@redhat.com>
-
由 yangdongsheng 提交于
libvirt-test: Backup virsh_change_media xml and fix virsh_edit.
-
由 Lucas Meneghel Rodrigues 提交于
virttest.virsh: Add virsh migrate setspeed/getspeed functions
-
- 12 11月, 2013 1 次提交
-
-
由 Lucas Meneghel Rodrigues 提交于
Svirt install
-
- 13 11月, 2013 3 次提交
-
-
由 Dongsheng Yang 提交于
Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
-
由 yangdongsheng 提交于
Signed-off-by: Nyangdongsheng <yangds.fnst@cn.fujitsu.com>
-
由 Dongsheng Yang 提交于
Signed-off-by: NDongsheng Yang <yangds.fnst@cn.fujitsu.com>
-
- 12 11月, 2013 9 次提交
-
-
由 Yiqiao Pu 提交于
qemu.test.ipi_x2apic: Typo fix str -> check_string.
-
由 Feng Yang 提交于
Signed-off-by: NFeng Yang <fyang@redhat.com>
-
由 Feng Yang 提交于
Signed-off-by: NFeng Yang <fyang@redhat.com>
-
由 Guannan Ren 提交于
migrate_setspeed(domain, bandwidth, extra=None, **dargs) migrate_getspeed(domain, **dargs)
-
由 Hao Liu 提交于
* In RHEL-6, vcpucount --config option must be used with --maximum or --active option, using only --config option with cause error: > virsh vcpucount virt-tests-vm1 --config error: when using --config, either --maximum or --active must be specified * The vm need to backup with '--inactive' option to avoid xml inconsistence. * No need to disable pylint E1111 * Fix some pylint/pep8 problem. Signed-off-by: NHao Liu <hliu@redhat.com>
-
由 Hao Liu 提交于
* In new_from_dumpxml(), the used keyword argument 'options' doesn't exist in virsh.dumpxml(). This must be a typo s/options/extra. * Fix a raise typo and some pylint/pep8 issues. * The original xml of the vm need to be backed up before test and restored after it to keep the xml unchanged. * When backing up, the xml need to be dumped using '--inactive' option. Otherwise the xml backup is slightly different from the original one like below. I'm not sure this will cause any problem, but it's annoying. --- +++ @@ -4,6 +4,9 @@ <memory unit='KiB'>1048576</memory> <currentMemory unit='KiB'>1048576</currentMemory> <vcpu placement='static'>2</vcpu> + <resource> + <partition>/machine</partition> + </resource> <os> <type arch='x86_64' machine='pc-i440fx-rhel7.0.0'>hvm</type> <boot dev='hd'/> @@ -43,7 +46,9 @@ </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> - <graphics type='vnc' port='-1' autoport='yes'/> + <graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'> + <listen type='address' address='127.0.0.1'/> + </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> @@ -52,4 +57,5 @@ <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> + <seclabel type='dynamic' model='selinux' relabel='yes'/> </domain> Signed-off-by: NHao Liu <hliu@redhat.com>
-
由 Lucas Meneghel Rodrigues 提交于
qemu.tests: new case to check guest clock offset
-
由 Lucas Meneghel Rodrigues 提交于
Add lvm support for qemu tests
-
由 Lucas Meneghel Rodrigues 提交于
virttest.qemu_vm: Log information about the parent PID and the monitor n...
-
- 11 11月, 2013 6 次提交
-
-
由 Ruda Moura 提交于
When starting the qemu process, there is not much information about the running parent PID (the autotest shell script that starts qemu) or the monitor name that we are trying to connect (for example, hmp1). So with this commit we're logging this information when qemu is started, in order to provide information for debugging. Example: When running ./run -t qemu --tests=uptime --qemu_sandbox=on From debug.log: 11:43:17 INFO | Created qemu process with parent PID 15592 11:43:17 INFO | Connecting to monitor 'hmp1' 11:44:17 WARNI| Could not find (qemu) prompt after connecting to monitor. Output so far: '' 11:44:18 ERROR| Could not connect to monitor 'hmp1' 11:44:18 DEBUG| Destroying VM virt-tests-vm1 (PID 15594) Parent PID is 15592, now we are trying to find what is wrong... ps -ef | grep 15592 rmoura 15592 15591 0 11:43 pts/3 00:00:00 /bin/bash -c source /tmp/autotestbMRLRL.sh rmoura 15594 15592 0 11:43 pts/3 00:00:00 [qemu-system-x86] <defunct> In this situation, it's clear that qemu-system-x86_64 goes bad. Signed-off-by: NRuda Moura <rmoura@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
register lvm object to env file when use lvm storage, and restore it at postprocess to clean up new volumes when "force_remove_image = yes";
-
- 09 11月, 2013 3 次提交
-
-
由 Rudá Moura 提交于
CPUID config file updates
-
由 Eduardo Habkost 提交于
The SVM feature leaf is known to change between versions because it was (incorrectly) non-zero even if SVM was disabled. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Eduardo Habkost 提交于
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
- 08 11月, 2013 5 次提交
-
-
由 Lucas Meneghel Rodrigues 提交于
Signed-off-by: NLucas Meneghel Rodrigues <lmr@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
Signed-off-by: NXu Tian <xutian@redhat.com>
-
由 Xu Tian 提交于
check guest clock drift less that $acceptable_offset after online/offline hotpluged vcpus; Signed-off-by: NXu Tian <xutian@redhat.com>
-