- 23 2月, 2012 2 次提交
-
-
由 Johan Hedberg 提交于
This patch implements support for the Set LE mgmt command. Now, in addition to the enable_le module parameter user space needs to send an explicit Enable LE command to enable LE support. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch makes it possible to change the Link Security setting while powered off and have it automatically enabled when powering on a device. To track the desired state once powered on a new HCI_LINK_SECURITY flag is added. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 22 2月, 2012 1 次提交
-
-
由 Johan Hedberg 提交于
This patch makes it possible to toggle the connectable & discoverable settings when powered off. Two new hdev->dev_flags flags are added to track what the scan mode should be when the device is finally powered on. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 21 2月, 2012 3 次提交
-
-
由 Johan Hedberg 提交于
This patch adds rudimentary support for the Set High Speed command in the form of a new HCI dev flag (HCI_HS_ENABLED). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
Since neither High Speed (HS) nor Low Energy (LE) are fully implemented yet, only expose them in supported settings when enabled. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The HCI monitor channel can be used to monitor all packets and events from the Bluetooth subsystem. The monitor is not bound to any specific HCI device and allows even capturing multiple devices at the same time. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 13 2月, 2012 9 次提交
-
-
由 Vinicius Costa Gomes 提交于
With the use of the new structures and lists for the SMP LTK's we may remove some code that is now unused. No need to have extra fields of information inside link_key now that it is only used for Link Keys. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Vinicius Costa Gomes 提交于
This includes a new list for storing the keys and a new structure used to represent each key. Some notes: authenticated is used to identify that the key may be used to setup a HIGH security link. As the same list is used to store both the STK's and the LTK's the type field is used so we can separate between those two types of keys and if the key should be used when in the master or slave role. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
The ssp_mode is essentially just a boolean so it's more appropriate to have it simply as a flag in hdev->dev_flags. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds missing EIR defines (as specified in the Bluetooth Assigned Numbers document) to hci.h. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Fabio Estevam 提交于
Fix the following build warning: CC [M] net/bluetooth/hci_core.o net/bluetooth/hci_core.c: In function ‘__check_enable_hs’: net/bluetooth/hci_core.c:2587: warning: return from incompatible pointer type module_param in hci_core.c passes 'enable_hs' as bool format, so fix this variable definition type. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
There's no point in exposing these to user-space (which is what happens to everything in hdev->flags) so move them to dev_flags instead. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andrei Emeltchenko 提交于
Adds HCI_ACL_TX_TIMEOUT and clear conversion from msec to jiffies Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andrei Emeltchenko 提交于
Adds support for Number Of Completed Data Blocks Event. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
The EIR defines are needed also outside of mgmt.c (e.g. in hci_event.c to check if EIR data has the complete name) so it's better to have them in a single public place, i.e. hci.h. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 23 1月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Fixes: net/bluetooth/hci_core.c: In function ‘__check_enable_hs’: net/bluetooth/hci_core.c:2587:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2011 1 次提交
-
-
由 Andrei Emeltchenko 提交于
Make code readable by removing magic numbers. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 12月, 2011 2 次提交
-
-
由 Andrei Emeltchenko 提交于
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 19 12月, 2011 2 次提交
-
-
由 Andrei Emeltchenko 提交于
Implement block size read function. Use different variables for packet-based and block-based flow control. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Johan Hedberg 提交于
This patch updates the mgmt_read_info and related messages to the latest management API which uses a bitfield of settings instead of individual boolean values. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 02 12月, 2011 3 次提交
-
-
由 Andre Guedes 提交于
This patch adds the parameter struct and the command complete event handler to the LE Set Scan Parameter HCI command. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds the dev_flags field to struct hci_dev. This new flags variable should be used to define flags related to BR/EDR and/or LE controller itself. It should be used to define flags which represents states from the controller. The dev_flags is cleared in case the controller sends a Reset Command Complete Event to the host. Also, this patch adds the HCI_LE_SCAN flag which was created to track if the controller is performing LE scan or not. The flag is set/cleared when the controller starts/stops scanning. This is an initial effort to stop using hdev->flags to define internal flags since it is exported to userspace by an ioctl. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andrei Emeltchenko 提交于
Upstream Code Aurora function with minor trivial fixes. Origin: git://codeaurora.org/kernel/msm.gitSigned-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 17 11月, 2011 2 次提交
-
-
由 Andrei Emeltchenko 提交于
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Brian Gix 提交于
Signed-off-by: NBrian Gix <bgix@codeaurora.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 11月, 2011 1 次提交
-
-
由 Andrei Emeltchenko 提交于
Use HCI error reasons instead of magic numbers. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 10月, 2011 1 次提交
-
-
由 Andrei Emeltchenko 提交于
Implementation of Read Local AMP Info Command Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 21 9月, 2011 1 次提交
-
-
由 Antti Julku 提交于
Add command to management interface for enabling/disabling the fast connectable mode. Signed-off-by: NAntti Julku <antti.julku@nokia.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 7月, 2011 1 次提交
-
-
由 Vinicius Costa Gomes 提交于
We need these changes because SMP keys may have more information associated with them, for example, in the LTK case, it has an encrypted diversifier (ediv) and a random number (rand). Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 07 7月, 2011 4 次提交
-
-
由 Andre Guedes 提交于
Since we have the extended LMP features properly implemented, we should check the LMP_HOST_LE bit to know if the host supports LE. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds a new module parameter to enable/disable host LE support. By default host LE support is disabled. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch adds a handler to Write LE Host Supported command complete events. Once this commands has completed successfully, we should read the extended LMP features and update the extfeatures field in hci_dev. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This new field holds the extended LMP features value. Some LE mechanism such as discovery procedure needs to read the extended LMP features to work properly. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 14 6月, 2011 1 次提交
-
-
由 Vinicius Costa Gomes 提交于
This adds support for starting SMP Phase 2 Encryption, when the initial SMP negotiation is successful. This adds the LE Start Encryption and LE Long Term Key Request commands and related events. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 09 6月, 2011 2 次提交
-
-
由 Andre Guedes 提交于
The LE advertising cache should be cleared before performing a LE scanning. This will force the cache to contain only fresh advertising entries. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Anderson Briglia 提交于
This patch adds definitions and a new struct for Advertising Report Event from LE and Dual Mode controllers. Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 29 4月, 2011 1 次提交
-
-
由 Waldemar Rymarkiewicz 提交于
Introduce the link key types defs and use them instead of magic numbers. Signed-off-by: NWaldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 25 4月, 2011 1 次提交
-
-
由 David S. Miller 提交于
These header files are never installed to user consumption, so any __KERNEL__ cpp checks are superfluous. Projects should also not copy these files into their userland utility sources and try to use them there. If they insist on doing so, the onus is on them to sanitize the headers as needed. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2011 1 次提交
-
-
由 Gustavo F. Padovan 提交于
We can't send new commands before a cmd_complete for the HCI_RESET command shows up. Reported-by: NMikko Vinni <mmvinni@yahoo.com> Reported-by: NJustin P. Mattock <justinmattock@gmail.com> Reported-by: NEd Tomlinson <edt@aei.ca> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Tested-by: NJustin P. Mattock <justinmattock@gmail.com> Tested-by: NMikko Vinni <mmvinni@yahoo.com> Tested-by: NEd Tomlinson <edt@aei.ca>
-