提交 32748db0 编写于 作者: J Johan Hedberg

Bluetooth: Move Extended Inquiry Response defines to hci.h

The EIR defines are needed also outside of mgmt.c (e.g. in hci_event.c
to check if EIR data has the complete name) so it's better to have them
in a single public place, i.e. hci.h.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
上级 b57c1a56
......@@ -284,6 +284,19 @@ enum {
#define HCI_FLOW_CTL_MODE_PACKET_BASED 0x00
#define HCI_FLOW_CTL_MODE_BLOCK_BASED 0x01
/* Extended Inquiry Response field types */
#define EIR_FLAGS 0x01 /* flags */
#define EIR_UUID16_SOME 0x02 /* 16-bit UUID, more available */
#define EIR_UUID16_ALL 0x03 /* 16-bit UUID, all listed */
#define EIR_UUID32_SOME 0x04 /* 32-bit UUID, more available */
#define EIR_UUID32_ALL 0x05 /* 32-bit UUID, all listed */
#define EIR_UUID128_SOME 0x06 /* 128-bit UUID, more available */
#define EIR_UUID128_ALL 0x07 /* 128-bit UUID, all listed */
#define EIR_NAME_SHORT 0x08 /* shortened local name */
#define EIR_NAME_COMPLETE 0x09 /* complete local name */
#define EIR_TX_POWER 0x0A /* transmit power level */
#define EIR_DEVICE_ID 0x10 /* device ID */
/* ----- HCI Commands ---- */
#define HCI_OP_NOP 0x0000
......
......@@ -303,18 +303,6 @@ static u32 get_current_settings(struct hci_dev *hdev)
return settings;
}
#define EIR_FLAGS 0x01 /* flags */
#define EIR_UUID16_SOME 0x02 /* 16-bit UUID, more available */
#define EIR_UUID16_ALL 0x03 /* 16-bit UUID, all listed */
#define EIR_UUID32_SOME 0x04 /* 32-bit UUID, more available */
#define EIR_UUID32_ALL 0x05 /* 32-bit UUID, all listed */
#define EIR_UUID128_SOME 0x06 /* 128-bit UUID, more available */
#define EIR_UUID128_ALL 0x07 /* 128-bit UUID, all listed */
#define EIR_NAME_SHORT 0x08 /* shortened local name */
#define EIR_NAME_COMPLETE 0x09 /* complete local name */
#define EIR_TX_POWER 0x0A /* transmit power level */
#define EIR_DEVICE_ID 0x10 /* device ID */
#define PNP_INFO_SVCLASS_ID 0x1200
static u8 bluetooth_base_uuid[] = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册