- 23 2月, 2012 4 次提交
-
-
由 Johan Hedberg 提交于
This patch implements support for the Set LE mgmt command. Now, in addition to the enable_le module parameter user space needs to send an explicit Enable LE command to enable LE support. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch makes it possible to enable SSP through mgmt even when powered off. The setting will then get automatically actiated when powering on. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch makes it possible to change the Link Security setting while powered off and have it automatically enabled when powering on a device. To track the desired state once powered on a new HCI_LINK_SECURITY flag is added. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andrei Emeltchenko 提交于
Channel lock will be used to lock L2CAP channels which are locked currently by socket locks. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Reviewed-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 22 2月, 2012 1 次提交
-
-
由 Johan Hedberg 提交于
This patch makes it possible to toggle the connectable & discoverable settings when powered off. Two new hdev->dev_flags flags are added to track what the scan mode should be when the device is finally powered on. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 21 2月, 2012 6 次提交
-
-
由 Marcel Holtmann 提交于
The parameter list for setting the local name via management interface was missing the short name parameter. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
This patch adds rudimentary support for the Set High Speed command in the form of a new HCI dev flag (HCI_HS_ENABLED). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds an address type parameter to the Discovering event. The value matches that given to Start/Stop Discovery. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds an address type parameter to the Stop Discovery command which should match the value given to Start Discovery. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
Since neither High Speed (HS) nor Low Energy (LE) are fully implemented yet, only expose them in supported settings when enabled. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The HCI monitor channel can be used to monitor all packets and events from the Bluetooth subsystem. The monitor is not bound to any specific HCI device and allows even capturing multiple devices at the same time. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 20 2月, 2012 3 次提交
-
-
由 Marcel Holtmann 提交于
The HCI notifier handling was never used outside of Bluetooth core layer and thus remove it and replace it with direct function calls. Also move the stack internal event generation into the HCI socket layer. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The bt_cb(skb)->channel was only needed to make hci_send_to_sock() be used for HCI raw and control sockets. Since they have now separate sending functions this is no longer needed. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The sending functions for HCI raw and control sockets have nothing in common except that they iterate over the socket list. Split them into two so they can do their job more efficient. In addition the code becomes more readable. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 19 2月, 2012 6 次提交
-
-
由 Johan Hedberg 提交于
Instead of having status paramters part of each individual command response it's simpler to just have the status as part of the command complete header. This patch updates the code to follow this convention and thereby also ensures compliance with the latest mgmt API specification. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
In accordance to the latest mgmt API specification the opcode comes first and then the status. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andre Guedes 提交于
This patch adds interleaved discovery support to MGMT Start Discovery command. In case interleaved discovery is not supported (not a dual mode device), we perform BR/EDR or LE-only discovery according to the device capabilities. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andre Guedes 提交于
This patch merges DISCOVERY_INQUIRY and DISCOVERY_LE_SCAN states into a new state called DISCOVERY_FINDING. From the discovery perspective, we are pretty much worried about to know just if we are finding devices than what exactly phase of "finding devices" (inquiry or LE scan) we are currently running. Besides, to know if the controller is performing inquiry or LE scan we should check HCI_INQUIRY or HCI_LE_SCAN bits in hdev flags. Moreover, merging this two states will simplify the discovery state machine and will keep interleaved discovery implementation simpler. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andre Guedes 提交于
This patch adds to struct discovery_state the field 'type' so that we can track the discovery type the device is performing. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andre Guedes 提交于
This patch does some code refactoring in start_discovery function in order to prepare it for interleaved discovery support. MGMT_ADDR_* macros were moved to hci_core.h since they are now used to define discovery type macros. Discovery type macros were defined according to mgmt-api.txt specification: Possible values for the Type parameter are a bit-wise or of the following bits: 1 BR/EDR 2 LE Public 3 LE Random By combining these e.g. the following values are possible: 1 BR/EDR 6 LE (public & random) 7 BR/EDR/LE (interleaved discovery) Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 17 2月, 2012 9 次提交
-
-
由 Johan Hedberg 提交于
This patch adds the appropriate Intel copyright to mgmt files. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The latest mgmt API includes an address type for all messages containing an address. This patch updates the confirm name command to match this. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The latest mgmt API includes address types for all messages containing an address. This patch updates the PIN code messages to match this. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The latest mgmt API includes an address type wherever there's an address present. This patch updates the link key messages to match it. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andrei Emeltchenko 提交于
Use state_to_string function in debug statements. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andrei Emeltchenko 提交于
Function state_to_string will be used in other files in debug statements. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Joe Perches 提交于
Use specific logging functions instead of a generic bt_printk function can save some text. Remove now unused bt_printk function. Add compatibility BT_INFO and BT_ERR macros. (compiled x86 and defconfig with bluetooth and all bluetooth drivers) $ size net/bluetooth/built-in.o* text data bss dec hex filename 381662 20072 100416 502150 7a986 net/bluetooth/built-in.o.allyesconfig.new 382463 20072 100400 502935 7ac97 net/bluetooth/built-in.o.allyesconfig.old 126635 1388 132 128155 1f49b net/bluetooth/built-in.o.defconfig.new 127175 1388 132 128695 1f6b7 net/bluetooth/built-in.o.defconfig.old $ size drivers/bluetooth/built-in.o* 127575 8976 29476 166027 2888b drivers/bluetooth/built-in.o.allyesconfig.new 129512 8976 29516 168004 29044 drivers/bluetooth/built-in.o.allyesconfig.old 52998 3292 156 56446 dc7e drivers/bluetooth/built-in.o.defconfig.new 54358 3292 156 57806 e1ce drivers/bluetooth/built-in.o.defconfig.old Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
The Set SSP mgmt command can be used for enabling and disabling Secure Simple Pairing support for controllers that support it. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
The Set Link Security mgmt command is used to enable or disable link level security, also known as Security Mode 3. This is rarely enabled in modern systems but the command needs to be available for completeness, qualification purposes and those few systems that actually want to enable it. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 15 2月, 2012 7 次提交
-
-
由 Johan Hedberg 提交于
This patch implements the Read Supported Commands mgmt command which was recently added to the API specification. It returns a list of supported commands and events to user space. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Ulisses Furquim 提交于
__cancel_delayed_work() is being used in some paths where we cannot sleep waiting for the delayed work to finish. However, that function might return while the timer is running and the work will be queued again. Replace the calls with safer cancel_delayed_work() version which spins until the timer handler finishes on other CPUs and cancels the delayed work. Signed-off-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andre Guedes 提交于
We don't need to use the _sync variant in hci_conn_hold and hci_conn_put to cancel conn->disc_work delayed work. This way we avoid potential deadlocks like this one reported by lockdep. ====================================================== [ INFO: possible circular locking dependency detected ] 3.2.0+ #1 Not tainted ------------------------------------------------------- kworker/u:1/17 is trying to acquire lock: (&hdev->lock){+.+.+.}, at: [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] but task is already holding lock: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((&(&conn->disc_work)->work)){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff81034ed1>] wait_on_work+0x3d/0xaa [<ffffffff81035b54>] __cancel_work_timer+0xac/0xef [<ffffffff81035ba4>] cancel_delayed_work_sync+0xd/0xf [<ffffffffa00554b0>] smp_chan_create+0xde/0xe6 [bluetooth] [<ffffffffa0056160>] smp_conn_security+0xa3/0x12d [bluetooth] [<ffffffffa0053640>] l2cap_connect_cfm+0x237/0x2e8 [bluetooth] [<ffffffffa004239c>] hci_proto_connect_cfm+0x2d/0x6f [bluetooth] [<ffffffffa0046ea5>] hci_event_packet+0x29d1/0x2d60 [bluetooth] [<ffffffffa003dde3>] hci_rx_work+0xd0/0x2e1 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 -> #1 (slock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e553a>] _raw_spin_lock_bh+0x36/0x6a [<ffffffff81244d56>] lock_sock_nested+0x24/0x7f [<ffffffffa004d96f>] lock_sock+0xb/0xd [bluetooth] [<ffffffffa0052906>] l2cap_chan_connect+0xa9/0x26f [bluetooth] [<ffffffffa00545f8>] l2cap_sock_connect+0xb3/0xff [bluetooth] [<ffffffff81243b48>] sys_connect+0x69/0x8a [<ffffffff812e6579>] system_call_fastpath+0x16/0x1b -> #0 (&hdev->lock){+.+.+.}: [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Chain exists of: &hdev->lock --> slock-AF_BLUETOOTH-BTPROTO_L2CAP --> (&(&conn->disc_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&conn->disc_work)->work)); lock(slock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&conn->disc_work)->work)); lock(&hdev->lock); *** DEADLOCK *** 2 locks held by kworker/u:1/17: #0: (hdev->name){.+.+.+}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf #1: ((&(&conn->disc_work)->work)){+.+...}, at: [<ffffffff81035751>] process_one_work+0x11a/0x2bf stack backtrace: Pid: 17, comm: kworker/u:1 Not tainted 3.2.0+ #1 Call Trace: [<ffffffff812e06c6>] print_circular_bug+0x1f8/0x209 [<ffffffff81056d06>] __lock_acquire+0xa80/0xd74 [<ffffffff81021ef2>] ? arch_local_irq_restore+0x6/0xd [<ffffffff81022bc7>] ? vprintk+0x3f9/0x41e [<ffffffff81057444>] lock_acquire+0x8a/0xa7 [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff812e3870>] __mutex_lock_common+0x48/0x38e [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff81190fd6>] ? __dynamic_pr_debug+0x6d/0x6f [<ffffffffa0041155>] ? hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff8105320f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff812e3c75>] mutex_lock_nested+0x2a/0x31 [<ffffffffa0041155>] hci_conn_timeout+0x62/0x158 [bluetooth] [<ffffffff810357af>] process_one_work+0x178/0x2bf [<ffffffff81035751>] ? process_one_work+0x11a/0x2bf [<ffffffff81055af3>] ? lock_acquired+0x1d0/0x1df [<ffffffffa00410f3>] ? hci_acl_disconn+0x65/0x65 [bluetooth] [<ffffffff81036178>] worker_thread+0xce/0x152 [<ffffffff810407ed>] ? finish_task_switch+0x45/0xc5 [<ffffffff810360aa>] ? manage_workers.isra.25+0x16a/0x16a [<ffffffff81039a03>] kthread+0x95/0x9d [<ffffffff812e7754>] kernel_thread_helper+0x4/0x10 [<ffffffff812e5db4>] ? retint_restore_args+0x13/0x13 [<ffffffff8103996e>] ? __init_kthread_worker+0x55/0x55 [<ffffffff812e7750>] ? gs_change+0x13/0x13 Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Reviewed-by: NUlisses Furquim <ulisses@profusion.mobi> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Octavian Purdila 提交于
Since bluetooth uses multiple protocols types, to avoid lockdep warnings, we need to use different lockdep classes (one for each protocol type). This is already done in bt_sock_create but it misses a couple of cases when new connections are created. This patch corrects that to fix the following warning: <4>[ 1864.732366] ======================================================= <4>[ 1864.733030] [ INFO: possible circular locking dependency detected ] <4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3 <4>[ 1864.733883] ------------------------------------------------------- <4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock: <4>[ 1864.734869] (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.735541] <4>[ 1864.735549] but task is already holding lock: <4>[ 1864.736045] (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc <4>[ 1864.736732] <4>[ 1864.736740] which lock already depends on the new lock. <4>[ 1864.736750] <4>[ 1864.737428] <4>[ 1864.737437] the existing dependency chain (in reverse order) is: <4>[ 1864.738016] <4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}: <4>[ 1864.738549] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.738977] [<c13d35c1>] lock_sock_nested+0x58/0x68 <4>[ 1864.739411] [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76 <4>[ 1864.739858] [<c13d06c3>] __sock_sendmsg+0x50/0x59 <4>[ 1864.740279] [<c13d0ea2>] sock_sendmsg+0x94/0xa8 <4>[ 1864.740687] [<c13d0ede>] kernel_sendmsg+0x28/0x37 <4>[ 1864.741106] [<c14969ca>] rfcomm_send_frame+0x30/0x38 <4>[ 1864.741542] [<c1496a2a>] rfcomm_send_ua+0x58/0x5a <4>[ 1864.741959] [<c1498447>] rfcomm_run+0x441/0xb52 <4>[ 1864.742365] [<c104f095>] kthread+0x63/0x68 <4>[ 1864.742742] [<c14d5182>] kernel_thread_helper+0x6/0xd <4>[ 1864.743187] <4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}: <4>[ 1864.743667] [<c1061ada>] __lock_acquire+0x988/0xc00 <4>[ 1864.744100] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.744519] [<c14d2c70>] __mutex_lock_common+0x3b/0x33f <4>[ 1864.744975] [<c14d303e>] mutex_lock_nested+0x2d/0x36 <4>[ 1864.745412] [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.745842] [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b <4>[ 1864.746288] [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62 <4>[ 1864.746737] [<c13d275d>] sys_socketcall+0x1db/0x422 <4>[ 1864.747165] [<c14d42f0>] syscall_call+0x7/0xb Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Vinicius Costa Gomes 提交于
queue_delayed_work() expects a relative time for when that work should be scheduled. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Andrzej Kaczmarek 提交于
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout value to be specified in jiffies but constants defined in miliseconds are used. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. __set_chan_timer macro still uses jiffies as input to avoid multiple conversions from/to jiffies for sk_sndtimeo value which is already specified in jiffies. Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Ackec-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 13 2月, 2012 4 次提交
-
-
由 David Herrmann 提交于
This avoids using the dev_set/get_drvdata() functions to retrieve a pointer to our own structure. We can use simple pointer arithmetic here. The drvdata field is actually not needed by any other code-path but this makes the code more consistent with hci_dev. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 David Herrmann 提交于
The linux device model provides dev_set/get_drvdata so we can use this to save private driver data. This also removes several unnecessary casts. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 David Herrmann 提交于
We currently use dev_set_drvdata to keep a pointer to ourself. This doesn't make sense as we are the bus and not a driver. Therefore, introduce to_hci_dev() so we can get a struct hci_dev pointer from a struct device pointer. dev_set/get_drvdata() is reserved for drivers that provide a device and not for the bus using the device. The bus can use simple pointer arithmetic to retrieve its private data. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johan Hedberg 提交于
This patch add a new Device Unpaired mgmt event. This will be sent to all mgmt sockets except the one that requested unpairing (that socket will get a command complete instead). The event is also reserved for future SMP updates where a remote device will be able to request pairing revocation from us. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org>
-