Use shlex to split the CLI command, respecting quoted arguments, and
also comments. This allows to call for ex:

(QEMU) human-monitor-command command-line="screendump /dev/null"
{"execute": "human-monitor-command", "arguments": {"command-line": "screendump /dev/null"}}
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-3-marcandre.lureau@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With vga=775 on the Linux command line a first boot of the VM running
Linux works fine. After a warm reboot it crashes during Linux boot.

Before that, valgrind points out bad memory write to console
surface. The VGA code is not aware that virtio-gpu got a message
surface scanout when the display is disabled. Let's reset VGA graphic
mode when it is the case, so that a new display surface is created
when doing further VGA operations.

https://bugs.launchpad.net/qemu/+bug/1784900/Reported-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The data in an mbuf buffer is not necessarily at the start of the
allocated buffer. (For instance m_adj() allows data to be trimmed
from the start by just advancing the pointer and reducing the length.)
This means that the allocated buffer size (m->m_size) and the
amount of space from the m_data pointer to the end of the
buffer (M_ROOM(m)) are not necessarily the same.

Commit 864036e2 tried to change the m_inc() function from
taking the new allocated-buffer-size to taking the new room-size,
but forgot to change the initial "do we already have enough space"
check. This meant that if we were trying to extend a buffer which
had a leading gap between the buffer start and the data, we might
incorrectly decide it didn't need to be extended, and then
overrun the end of the buffer, causing memory corruption and
an eventual crash.

Change the "already big enough?" condition from checking the
argument against m->m_size to checking against M_ROOM().
This only makes a difference for the callsite in m_cat();
the other three callsites all start with a freshly allocated
mbuf from m_get(), which will have m->m_size == M_ROOM(m).

Fixes: 864036e2
Fixes: https://bugs.launchpad.net/qemu/+bug/1785670Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20180807114501.12370-1-peter.maydell@linaro.org
Tested-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

The instance_init function of the xtensa CPUs creates a memory region,
but does not set an owner, so the memory region is not destroyed
correctly when the CPU object is removed. This can happen when
introspecting the CPU devices, so introspecting the CPU device will
leave a dangling memory region object in the QOM tree. Make sure to
set the right owner here to fix this issue.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Message-id: 1532005320-17794-1-git-send-email-thuth@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The code currently in gicv3_gicd_no_migration_shift_bug_post_load()
that handles migration from older QEMU versions with a particular
bug is misplaced. We need to run this after migration in all cases,
not just the cases where the "arm_gicv3/gicd_no_migration_shift_bug"
subsection is present, so it must go in a post_load hook for the
top level VMSD, not for the subsection. Move it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-6-peter.maydell@linaro.org

Contrary to the the impression given in docs/devel/migration.rst,
the migration code does not run the pre_load hook for a
subsection unless the subsection appears on the wire, and so
this is not a place where you can set the default value for
state for the "subsection not present" case. Instead this needs
to be done in a pre_load hook for whatever is the parent VMSD
of the subsection.

We got this wrong in two of the subsection definitions in
the GICv3 migration structs; fix this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180806123445.1459-5-peter.maydell@linaro.org

Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving various M profile vmstate structs
a 'needed' function that always returns true.
We reuse m_needed() for this, since it's always true here.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-4-peter.maydell@linaro.org

Commit 6692aac4 accidentally introduced a second initialization
of the .subsections field of vmstate_gicv3_cpu, instead of adding
the new subsection to the existing list. The effect of this was
probably that migration of GICv3 with virtualization enabled was
broken (or alternatively that migration of ICC_SRE_EL1 was broken,
depending on which of the two initializers the compiler used).
Combine the two into a single list.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-3-peter.maydell@linaro.org

Currently the migration code incorrectly treats a subsection with
no .needed function pointer as if it was the subsection list
terminator -- it is ignored and so is everything after it.
Work around this by giving vmstate_gicv3_gicd_no_migration_shift_bug
a 'needed' function that always returns true.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180806123445.1459-2-peter.maydell@linaro.org

If we do not opimize away dup_vec, we must mark its output as changed.

Fixes: 170ba88fReported-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180805233258.31892-1-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ppc patch queue for 2018-08-01

Here are a final couple of fixes for the 3.0 release.

# gpg: Signature made Wed 01 Aug 2018 04:52:57 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180801:
  sam460ex: Fix PCI interrupts with multiple devices
  hw/misc/macio: Fix device introspection problems in macio devices
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc, virtio: fixes

A couple of last minute fixes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 03 Aug 2018 09:35:54 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  tests/acpi: update tables after memory hotplug changes
  pc: acpi: fix memory hotplug regression by reducing stub SRAT entry size
  tests/acpi-test: update ACPI tables test blobs
  hw/acpi-build: Add a check for memory-less NUMA nodes
  vhost: check region type before casting
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Previous patch changes acpi tables, update expected
files accordingly.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit 848a1cc1 (hw/acpi-build: build SRAT memory affinity structures for DIMM devices)
broke the first dimm hotplug in following cases:

 1: there is no coldplugged dimm in the last numa node
    but there is a coldplugged dimm in another node

  -m 4096,slots=4,maxmem=32G               \
  -object memory-backend-ram,id=m0,size=2G \
  -device pc-dimm,memdev=m0,node=0         \
  -numa node,nodeid=0                      \
  -numa node,nodeid=1

 2: if order of dimms on CLI is:
       1st plugged dimm in node1
       2nd plugged dimm in node0

  -m 4096,slots=4,maxmem=32G               \
  -object memory-backend-ram,size=2G,id=m0 \
  -device pc-dimm,memdev=m0,node=1         \
  -object memory-backend-ram,id=m1,size=2G \
  -device pc-dimm,memdev=m1,node=0         \
  -numa node,nodeid=0                      \
  -numa node,nodeid=1

(qemu) object_add memory-backend-ram,id=m2,size=1G
(qemu) device_add pc-dimm,memdev=m2,node=0

the first DIMM hotplug to any node except the last one
fails (Windows is unable to online it).

Length reduction of stub hotplug memory SRAT entry,
fixes issue for some reason.

RHBZ: 1609234
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Now, QEmu adds a new check for memory-less NUMA nodes in build_srat().

It effects the ACPI test.

So, Update ACPI tables test blobs.
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently, Qemu ACPI builder doesn't consider the memory-less NUMA nodes, eg:

  -m 4G,slots=4,maxmem=8G \
  -numa node,nodeid=0 \
  -numa node,nodeid=1,mem=2G \
  -numa node,nodeid=2,mem=2G \
  -numa node,nodeid=3\

Guest Linux will report

  [    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xffffffffffffffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug

[mem 0x00000000-0xffffffffffffffff] and [mem 0x140000000-0x13fffffff] are bogus.

Add a check to avoid building srat memory for memory-less NUMA nodes, also update
the test file. Now the info in guest linux will be

  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x0009ffff]
  [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00100000-0x7fffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x80000000-0xbfffffff]
  [    0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x100000000-0x13fffffff]
  [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x140000000-0x33fffffff] hotplug
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Check region type first before casting the memory region
to IOMMUMemoryRegion. Otherwise QEMU will abort with below
error message when casting non-IOMMU memory region:

vhost_iommu_region_add: Object 0x561f28bce4f0 is not an
instance of type qemu:iommu-memory-region

Fixes: cb1efcf4 ("iommu: Add IOMMU index argument to notifier APIs")
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NTiwei Bie <tiwei.bie@intel.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The four interrupts of the PCI bus are connected to the same UIC pin
on the real Sam460ex. Evidence for this can be found in the UBoot
source for the Sam460ex in the Sam460ex.c file where
PCI_INTERRUPT_LINE is written. Change the ppc440_pcix model to behave
more like this.

This fixes the problem that can be observed when adding further PCI
cards that got their interrupt rotated to other interrupts than PCI
INT A. In particular, the bug was observed with an additional OHCI PCI
card or an ES1370 sound device.
Signed-off-by: NSebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Tested-by: NSebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Valgrind reports an error when introspecting the macio devices, e.g.:

echo "{'execute':'qmp_capabilities'} {'execute':'device-list-properties'," \
 "'arguments':{'typename':'macio-newworld'}}" \
 "{'execute': 'human-monitor-command', " \
 "'arguments': {'command-line': 'info qtree'}}" | \
 valgrind -q ppc64-softmmu/qemu-system-ppc64 -M none,accel=qtest -qmp stdio
[...]
==30768== Invalid read of size 8
==30768==    at 0x5BC1EA: qdev_print (qdev-monitor.c:686)
==30768==    by 0x5BC1EA: qbus_print (qdev-monitor.c:719)
==30768==    by 0x43E458: handle_hmp_command (monitor.c:3446)
[...]

Use the new function sysbus_init_child_obj() to initialize the objects
here, to get the reference counting of the objects right, so that they
are cleaned up correctly when the parent gets removed.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Monitor patches for 2018-07-31 (3.0.0-rc3)

# gpg: Signature made Tue 31 Jul 2018 16:46:16 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-07-31:
  monitor: temporary fix for dead-lock on event recursion
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With a Spice port chardev, it is possible to reenter
monitor_qapi_event_queue() (when the client disconnects for
example). This will dead-lock on monitor_lock.

Instead, use some TLS variables to check for recursion and queue the
events.

Fixes:
 (gdb) bt
 #0  0x00007fa69e7217fd in __lll_lock_wait () at /lib64/libpthread.so.0
 #1  0x00007fa69e71acf4 in pthread_mutex_lock () at /lib64/libpthread.so.0
 #2  0x0000563303567619 in qemu_mutex_lock_impl (mutex=0x563303d3e220 <monitor_lock>, file=0x5633036589a8 "/home/elmarco/src/qq/monitor.c", line=645) at /home/elmarco/src/qq/util/qemu-thread-posix.c:66
 #3  0x0000563302fa6c25 in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x56330602bde0, errp=0x7ffc6ab5e728) at /home/elmarco/src/qq/monitor.c:645
 #4  0x0000563303549aca in qapi_event_send_spice_disconnected (server=0x563305afd630, client=0x563305745360, errp=0x563303d8d0f0 <error_abort>) at qapi/qapi-events-ui.c:149
 #5  0x00005633033e600f in channel_event (event=3, info=0x5633061b0050) at /home/elmarco/src/qq/ui/spice-core.c:235
 #6  0x00007fa69f6c86bb in reds_handle_channel_event (reds=<optimized out>, event=3, info=0x5633061b0050) at reds.c:316
 #7  0x00007fa69f6b193b in main_dispatcher_self_handle_channel_event (info=0x5633061b0050, event=3, self=0x563304e088c0) at main-dispatcher.c:197
 #8  0x00007fa69f6b193b in main_dispatcher_channel_event (self=0x563304e088c0, event=event@entry=3, info=0x5633061b0050) at main-dispatcher.c:197
 #9  0x00007fa69f6d0833 in red_stream_push_channel_event (s=s@entry=0x563305ad8f50, event=event@entry=3) at red-stream.c:414
 #10 0x00007fa69f6d086b in red_stream_free (s=0x563305ad8f50) at red-stream.c:388
 #11 0x00007fa69f6b7ddc in red_channel_client_finalize (object=0x563304df2360) at red-channel-client.c:347
 #12 0x00007fa6a56b7fb9 in g_object_unref () at /lib64/libgobject-2.0.so.0
 #13 0x00007fa69f6ba212 in red_channel_client_push (rcc=0x563304df2360) at red-channel-client.c:1341
 #14 0x00007fa69f68b259 in red_char_device_send_msg_to_client (client=<optimized out>, msg=0x5633059b6310, dev=0x563304e08bc0) at char-device.c:305
 #15 0x00007fa69f68b259 in red_char_device_send_msg_to_clients (msg=0x5633059b6310, dev=0x563304e08bc0) at char-device.c:305
 #16 0x00007fa69f68b259 in red_char_device_read_from_device (dev=0x563304e08bc0) at char-device.c:353
 #17 0x000056330317d01d in spice_chr_write (chr=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111) at /home/elmarco/src/qq/chardev/spice.c:199
 #18 0x00005633034deee7 in qemu_chr_write_buffer (s=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111, offset=0x7ffc6ab5ea70, write_all=false) at /home/elmarco/src/qq/chardev/char.c:112
 #19 0x00005633034df054 in qemu_chr_write (s=0x563304cafe20, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111, write_all=false) at /home/elmarco/src/qq/chardev/char.c:147
 #20 0x00005633034e1e13 in qemu_chr_fe_write (be=0x563304dbb800, buf=0x563304cc50b0 "{\"timestamp\": {\"seconds\": 1532944763, \"microseconds\": 326636}, \"event\": \"SHUTDOWN\", \"data\": {\"guest\": false}}\r\n", len=111) at /home/elmarco/src/qq/chardev/char-fe.c:42
 #21 0x0000563302fa6334 in monitor_flush_locked (mon=0x563304dbb800) at /home/elmarco/src/qq/monitor.c:425
 #22 0x0000563302fa6520 in monitor_puts (mon=0x563304dbb800, str=0x563305de7e9e "") at /home/elmarco/src/qq/monitor.c:468
 #23 0x0000563302fa680c in qmp_send_response (mon=0x563304dbb800, rsp=0x563304df5730) at /home/elmarco/src/qq/monitor.c:517
 #24 0x0000563302fa6905 in qmp_queue_response (mon=0x563304dbb800, rsp=0x563304df5730) at /home/elmarco/src/qq/monitor.c:538
 #25 0x0000563302fa6b5b in monitor_qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x563304df5730) at /home/elmarco/src/qq/monitor.c:624
 #26 0x0000563302fa6c4b in monitor_qapi_event_queue (event=QAPI_EVENT_SHUTDOWN, qdict=0x563304df5730, errp=0x7ffc6ab5ed00) at /home/elmarco/src/qq/monitor.c:649
 #27 0x0000563303548cce in qapi_event_send_shutdown (guest=false, errp=0x563303d8d0f0 <error_abort>) at qapi/qapi-events-run-state.c:58
 #28 0x000056330313bcd7 in main_loop_should_exit () at /home/elmarco/src/qq/vl.c:1822
 #29 0x000056330313bde3 in main_loop () at /home/elmarco/src/qq/vl.c:1862
 #30 0x0000563303143781 in main (argc=3, argv=0x7ffc6ab5f068, envp=0x7ffc6ab5f088) at /home/elmarco/src/qq/vl.c:4644

Note that error report is now moved to the first caller, which may
receive an error for a recursed event. This is probably fine (95% of
callers use &error_abort, the rest have NULL error and ignore it)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180731150144.14022-1-marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
[*_no_recurse renamed to *_no_reenter, local variables reordered]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Fix safe_syscall() on ppc64 host
Fix mmap() 0 length error case

# gpg: Signature made Tue 31 Jul 2018 09:41:07 BST
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
  linux-user: ppc64: don't use volatile register during safe_syscall
  tests: add check_invalid_maps to test-mmap
  linux-user/mmap.c: handle invalid len maps correctly
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Bug fixes.

# gpg: Signature made Mon 30 Jul 2018 13:00:39 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  backends/cryptodev: remove dead code
  timer: remove replay clock probe in deadline calculation
  i386: implement MSR_SMI_COUNT for TCG
  i386: do not migrate MSR_SMI_COUNT on machine types <2.12
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

fix large guests on s390x

# gpg: Signature made Tue 31 Jul 2018 07:47:38 BST
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180731:
  s390x/sclp: fix maxram calculation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

r11 is a volatile register on PPC as per calling conventions.
The safe_syscall code uses it to check if the signal_pending
is set during the safe_syscall. When a syscall is interrupted
on return from signal handling, the r11 might be corrupted
before we retry the syscall leading to a crash. The registers
r0-r13 are not to be used here as they have
volatile/designated/reserved usages.

Change the code to use r14 which is non-volatile.
Use SP+16 which is a slot for LR, for save/restore of previous value
of r14. SP+16 can be used, as LR is preserved across the syscall.

Steps to reproduce:
On PPC host, issue `qemu-x86_64 /usr/bin/cc -E -`
Attempt Ctrl-C, the issue is reproduced.

Reference:
https://refspecs.linuxfoundation.org/ELF/ppc64/PPC-elf64abi-1.9.html#REG
https://openpowerfoundation.org/wp-content/uploads/2016/03/ABI64BitOpenPOWERv1.1_16July2015_pub4.pdfSigned-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Tested-by: NRichard Henderson <richard.henderson@linaro.org>
Tested-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <153301568965.30312.10498134581068746871.stgit@dhcp-9-109-246-16>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

This adds a test to make sure we fail properly for a 0 length mmap.
There are most likely other failure conditions we should also check.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Message-Id: <20180730134321.19898-3-alex.bennee@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

I've slightly re-organised the check to more closely match the
sequence that the kernel uses in do_mmap(). We check for both the zero
case (EINVAL) and the overflow length case (ENOMEM).
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Reviewed-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <20180730134321.19898-2-alex.bennee@linaro.org>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>

Block layer patches:

- qemu-img convert -C is now required to enable copy offloading
- file-posix: Fix write_zeroes with unmap on block devices (would fall
  back to explicit writes on recent kernels)
- Fix query-blockstats interface for use with -blockdev
- Minor fixes and documentation updates

# gpg: Signature made Mon 30 Jul 2018 16:08:14 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  qemu-iotests: Test query-blockstats with -drive and -blockdev
  block/qapi: Include anonymous BBs in query-blockstats
  block/qapi: Add 'qdev' field to query-blockstats result
  file-posix: Fix write_zeroes with unmap on block devices
  block: Fix documentation for BDRV_REQ_MAY_UNMAP
  iotests: Add test for 'qemu-img convert -C' compatibility
  qemu-img: Add -C option for convert with copy offloading
  Revert "qemu-img: Document copy offloading implications with -S and -c"
  iotests: Don't lock /dev/null in 226
  docs: Describe using images in writing iotests
  file-posix: Handle EINTR in preallocation=full write
  qcow2: A grammar fix in conflicting cache sizing error message
  qcow: fix a reference leak
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * arm/smmuv3: Fix broken VM state migration
 * armv7m_nvic: Fix broken VM state migration
 * hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()
 * hw/arm/iotkit: Fix IRQ number for timer1
 * hw/misc/tz-mpc: Zero the LUT on initialization, not just reset
 * target/arm: Remove duplicate 'host' entry in '-cpu ?' output

# gpg: Signature made Mon 30 Jul 2018 15:16:01 BST
# gpg:                using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20180730:
  target/arm: Remove duplicate 'host' entry in '-cpu ?' output
  hw/misc/tz-mpc: Zero the LUT on initialization, not just reset
  hw/arm/iotkit: Fix IRQ number for timer1
  armv7m_nvic: Fix m-security subsection name
  hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()
  arm/smmuv3: Fix missing VMSD terminator
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We clamp down ram_size to match the sclp increment size. We do
not do the same for maxram_size, which means for large guests
with some sizes (e.g. -m 50000) maxram_size differs from ram_size.
This can break other code (e.g. CMMA migration) which uses maxram_size
to calculate the number of pages and then throws some errors.

Fixes: 82fab5c5 ("s390x/sclp: remove memory hotplug support")
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: qemu-stable@nongnu.org
CC: David Hildenbrand <david@redhat.com>
Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Since 86f0a186 the TYPE_ARM_HOST_CPU is only compiled when CONFIG_KVM
is enabled.

Remove the now redundant special-case introduced in a96c0514, to avoid:

  $ qemu-system-aarch64 -machine virt -cpu \? | fgrep host
  host
  host (only available in KVM mode)
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727132311.2777-1-f4bug@amsat.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In the tz-mpc device we allocate a data block for the LUT,
which we then clear to zero in the device's reset method.
This is conceptually fine, but unfortunately results in a
valgrind complaint about use of uninitialized data on startup:

==30906== Conditional jump or move depends on uninitialised value(s)
==30906==    at 0x503609: tz_mpc_translate (tz-mpc.c:439)
==30906==    by 0x3F3D90: address_space_translate_iommu (exec.c:511)
==30906==    by 0x3F3FF8: flatview_do_translate (exec.c:584)
==30906==    by 0x3F4292: flatview_translate (exec.c:644)
==30906==    by 0x3F2120: address_space_translate (memory.h:1962)
==30906==    by 0x3FB753: address_space_ldl_internal (memory_ldst.inc.c:36)
==30906==    by 0x3FB8A6: address_space_ldl (memory_ldst.inc.c:80)
==30906==    by 0x619037: ldl_phys (memory_ldst_phys.inc.h:25)
==30906==    by 0x61985D: arm_cpu_reset (cpu.c:255)
==30906==    by 0x98791B: cpu_reset (cpu.c:249)
==30906==    by 0x57FFDB: armv7m_reset (armv7m.c:265)
==30906==    by 0x7B1775: qemu_devices_reset (reset.c:69)

This is because of a reset ordering problem -- the TZ MPC
resets after the CPU, but an M-profile CPU's reset function
includes memory loads to get the initial PC and SP, which
then go through an MPC that hasn't yet been reset.

The simplest fix for this is to zero the LUT when we
initialize the data, which will result in the MPC's
translate function giving the right answers for these
early memory accesses.
Reported-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NThomas Huth <thuth@redhat.com>
Message-id: 20180724153616.32352-1-peter.maydell@linaro.org

A cut-and-paste error meant we were incorrectly wiring up the timer1
IRQ to IRQ3. IRQ3 is the interrupt for timer0 -- move timer0 to
IRQ4 where it belongs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727113854.20283-3-peter.maydell@linaro.org

The vmstate save/load code insists that subsections of a VMState must
have names which include their parent VMState's name as a leading
substring.  Unfortunately it neither documents this nor checks it on
device init or state save, but instead fails state load with a
confusing error message ("Missing section footer for armv7m_nvic").

Fix the name of the m-security subsection of the NVIC, so that
state save/load works correctly for the security-enabled NVIC.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20180727113854.20283-2-peter.maydell@linaro.org

When copy_properties_from_host() ignores the error for an optional
property, it frees the error, but fails to reset it.

Hence if two or more optional properties are missing, an assertion is
triggered:

    util/error.c:57: error_setv: Assertion `*errp == NULL' failed.

Fis this by resetting err to NULL after ignoring the error.

Fixes: 9481cf2e ("hw/arm/sysbus-fdt: helpers for clock node generation")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Message-id: 20180725113000.11014-1-geert+renesas@glider.be
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The 'vmstate_smmuv3_queue' is missing the end-of-list marker.

Fixes: 10a83cb9Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180727135406.15132-1-dgilbert@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: dropped stray blank line]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make sure that query-blockstats returns information for every
BlockBackend that is named or attached to a device model (or both).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>