sam460ex: Fix PCI interrupts with multiple devices

The four interrupts of the PCI bus are connected to the same UIC pin
on the real Sam460ex. Evidence for this can be found in the UBoot
source for the Sam460ex in the Sam460ex.c file where
PCI_INTERRUPT_LINE is written. Change the ppc440_pcix model to behave
more like this.

This fixes the problem that can be observed when adding further PCI
cards that got their interrupt rotated to other interrupts than PCI
INT A. In particular, the bug was observed with an additional OHCI PCI
card or an ES1370 sound device.
Signed-off-by: NSebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: NBALATON Zoltan <balaton@eik.bme.hu>
Tested-by: NSebastian Bauer <mail@sebastianbauer.info>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

hw/ppc/ppc440_pcix.c

@@ -57,7 +57,7 @@ typedef struct PPC440PCIXState {
     struct PLBOutMap pom[PPC440_PCIX_NR_POMS];
     struct PLBInMap pim[PPC440_PCIX_NR_PIMS];
     uint32_t sts;
-    qemu_irq irq[PCI_NUM_PINS];
+    qemu_irq irq;
     AddressSpace bm_as;
     MemoryRegion bm;
 
@@ -418,21 +418,20 @@ static void ppc440_pcix_reset(DeviceState *dev)
  * This may need further refactoring for other boards. */
 static int ppc440_pcix_map_irq(PCIDevice *pci_dev, int irq_num)
 {
-    int slot = pci_dev->devfn >> 3;
-    trace_ppc440_pcix_map_irq(pci_dev->devfn, irq_num, slot);
-    return slot - 1;
+    trace_ppc440_pcix_map_irq(pci_dev->devfn, irq_num, 0);
+    return 0;
 }
 
 static void ppc440_pcix_set_irq(void *opaque, int irq_num, int level)
 {
-    qemu_irq *pci_irqs = opaque;
+    qemu_irq *pci_irq = opaque;
 
     trace_ppc440_pcix_set_irq(irq_num);
     if (irq_num < 0) {
         error_report("%s: PCI irq %d", __func__, irq_num);
         return;
     }
-    qemu_set_irq(pci_irqs[irq_num], level);
+    qemu_set_irq(*pci_irq, level);
 }
 
 static AddressSpace *ppc440_pcix_set_iommu(PCIBus *b, void *opaque, int devfn)
@@ -471,19 +470,15 @@ static int ppc440_pcix_initfn(SysBusDevice *dev)
 {
     PPC440PCIXState *s;
     PCIHostState *h;
-    int i;
 
     h = PCI_HOST_BRIDGE(dev);
     s = PPC440_PCIX_HOST_BRIDGE(dev);
 
-    for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
-        sysbus_init_irq(dev, &s->irq[i]);
-    }
-
+    sysbus_init_irq(dev, &s->irq);
     memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
     h->bus = pci_register_root_bus(DEVICE(dev), NULL, ppc440_pcix_set_irq,
-                         ppc440_pcix_map_irq, s->irq, &s->busmem,
-                         get_system_io(), PCI_DEVFN(0, 0), 4, TYPE_PCI_BUS);
+                         ppc440_pcix_map_irq, &s->irq, &s->busmem,
+                         get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
 
     s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0), "ppc4xx-host-bridge");
 

hw/ppc/sam460ex.c

@@ -515,10 +515,8 @@ static void sam460ex_init(MachineState *machine)
 
     /* PCI bus */
     ppc460ex_pcie_init(env);
-    /* FIXME: is this correct? */
-    dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000,
-                                uic[1][0], uic[1][20], uic[1][21], uic[1][22],
-                                NULL);
+    /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
+    dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000, uic[1][0]);
     pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
     if (!pci_bus) {
         error_report("couldn't create PCI controller!");