This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:

    $ qemu-system-xtensaeb -M sim
    Unable to find CPU definition
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Tested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

 This change addresses a problem where QEMU incorrectly traps on
floating-point MADD group instructions with SIGILL, at least while
emulating MIPS32r2 processors.  These instructions use the COP1X major
opcode and include ones like:

	madd.d	$f2,$f4,$f2,$f6

 Here's Nathan's original analysis of the problem:

"QEMU essentially does:

  d = find_cpu (cpu_string)	// get CPU definition
  fpu_init (env, d)		// initialize fpu state (init FCR0, basically)
  cpu_reset (env)

...and the cpu_reset call clears all interesting state that fpu_init
setup, then proceeds to reinitialize all the CP0 registers...but not
FCR0."

 I have verified this change with system emulation running the GDB test
suite for the mips-sde-elf target (o32, big endian, 24Kf CPU emulated),
there were 55 progressions and no regressions.
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

LOAD_UNLOAD and START_STOP have same value, so the table
entry is initialized twice. Spotted by Clang compiler.

Remove LOAD_UNLOAD entry since START_STOP entry already
represents both.
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Statement s=s; makes little sense, remove it. Spotted by Clang
compiler.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.

Fix with #ifdeffery and by using other variables.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Clang compiler complained about use of reserved word 'restrict' in SLIRP
and QAPI.

Prefix C keywords with "q_", adjust SLIRP accordingly.
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.

Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc
device was created only after use, spotted by Clang compiler. Also,
it was not created if the FDC didn't exist.

Rearrange code to fix order. Always create the TC line.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Difference with AMD PCscsi is that DC-390 contains a EEPROM,
and that a romfile is available to add INT13 support.

This has been successfully tested on:
- MS DOS 6.22 (using DC390 ASPI driver)
- MS Windows 98 SE (using DC390 driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using DC390 driver)
- hard disk and cdrom boot
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This reverts commit 0883c515.

Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

These will be used by next commits.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* kraxel/usb.58:
  usb-storage: fix SYNCHRONIZE_CACHE
  usb-storage: improve debug logging

* kwolf/for-anthony:
  qemu-img: use QemuOpts instead of QEMUOptionParameter in resize function
  qemu-iotests: Be more flexible with image creation options
  qemu-iotests: add 039 qcow2 lazy refcounts test
  qemu-io: add "abort" command to simulate program crash
  qcow2: implement lazy refcounts
  qemu-iotests: ignore qemu-img create lazy_refcounts output
  docs: add lazy refcounts bit to qcow2 specification
  qcow2: introduce dirty bit
  docs: add dirty bit to qcow2 specification
  qemu-iotests: add qed.py image manipulation utility
  qapi: generalize documentation of streaming commands
  ide scsi: Mess with geometry only for hard disk devices

Commit 59310659 is incomplete,
we'll arrive in the scsi command complete callback in CSW state
and must handle that case correctly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

in_addr_t isn't available on mingw32.  Just use an unsigned long instead.  I
considered typedef'ing in_addr_t on mingw32 but this would potentially be
brittle if mingw32 did introduce the type.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:

  1. If the image was closed normally, it is marked clean.

  2. If an allocating write was performed and the image was not closed
     normally, then it is marked dirty.

     a. Written data can be read back successfully.
     b. The image file can be repaired and will be marked clean again.
     c. The image file is automatically repaired when opened read/write.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Avoiding data loss and corruption is the top requirement for image file
formats.  The qemu-io "abort" command makes it possible to simulate
program crashes and does not give the image format a chance to cleanly
shut down.  This command is useful for data integrity test cases.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty.  In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.

Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM).  Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.

The lazy refcount optimization must be enabled at image creation time:

  qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
  qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough

Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options.  This ensures that existing golden outputs
continue to pass despite the new option that has been added.

Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option.  This ensures git-bisect(1) continues to
work.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The lazy refcounts bit indicates that this image can take advantage of
the dirty bit and that refcount updates can be postponed.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds an incompatible feature bit to mark images that have not
been closed cleanly.  When a dirty image file is opened a consistency
check and repair is performed.

Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The dirty bit will make it possible to perform lazy refcount updates,
where the image file is not kept consistent all the time.  Upon opening
a dirty image file, it is necessary to perform a consistency check and
repair any incorrect refcounts.

Therefore the dirty bit must be an incompatible feature bit.  We don't
want old programs accessing a file with stale refcounts.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The qed.py utility can inspect and manipulate QED image files.  It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file.  It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.

This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Talk about background operations in general, rather than specifically
about streaming.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Legacy -drive cyls=... are now ignored completely when the drive
doesn't back a hard disk device.  Before, they were first checked
against a hard disk's limits, then ignored.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit b1f416aa breaks vhost_net
because it always registers the virtio_pci_host_notifier_read() handler
function on the ioeventfd, even when vhost_net.ko is using the ioeventfd.
The result is both QEMU and vhost_net.ko polling on the same eventfd
and the virtio_net.ko guest driver seeing inconsistent results:

  # ifconfig eth0 192.168.0.1 netmask 255.255.255.0
  virtio_net virtio0: output:id 0 is not a head!

To fix this, proceed the same as we do for irqfd: add a parameter to
virtio_queue_set_host_notifier_fd_handler and in that case only set
the notifier, not the handler.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kiszka/queues/slirp:
  slirp: Handle whole 127.0.0.0/8 network as local addresses.

* 'axp-next' of git://repo.or.cz/qemu/rth:
  alpha-linux-user: Fix the getpriority syscall
  alpha-linux-user: Properly handle the non-rt sigprocmask syscall.
  alpha-linux-user: Fix a3 error return with v0 error bypass.
  linux-user: Translate pipe2 flags; add to strace
  linux-user: Allocate the right amount of space for non-fixed file maps
  linux-user: Handle O_SYNC, O_NOATIME, O_CLOEXEC, O_PATH
  linux-user: Sync fcntl.h bits with the kernel
  alpha-linux-user: Handle TARGET_SSI_IEEE_RAISE_EXCEPTION properly
  alpha-linux-user: Work around hosted mmap allocation problems
  alpha-linux-user: Fix signal handling

Alpha uses unbiased priority values in the syscall, with the a3
return value signaling error conditions.  Therefore, properly
interpret the libc getpriority as needed for the guest rather
than passing the host value through unchanged.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Name the syscall properly for QEMU, kernel source notwithstanding.
Fix syntax errors in the code thus enabled within do_syscall.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We were failing to initialize a3 for syscalls that bypass the
negative return value error check.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

If we let the kernel handle the implementation of mmap_find_vma,
via an anon mmap, we must use the size as indicated by the user
and not the size truncated to the filesize.

This happens often in ld.so, where we initially mmap the file to
the size of the text+data+bss to reserve an area, then mmap+fixed
over the top to properly handle data and bss.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h.  Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

We weren't aggregating the exceptions, nor raising signals properly.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>