qemu-iotests: add 039 qcow2 lazy refcounts test

This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:

  1. If the image was closed normally, it is marked clean.

  2. If an allocating write was performed and the image was not closed
     normally, then it is marked dirty.

     a. Written data can be read back successfully.
     b. The image file can be repaired and will be marked clean again.
     c. The image file is automatically repaired when opened read/write.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

tests/qemu-iotests/039

+#!/bin/bash
+#
+# Test qcow2 lazy refcounts
+#
+# Copyright (C) 2012 Red Hat, Inc.
+# Copyright IBM, Corp. 2010
+#
+# Based on test 038.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=stefanha@linux.vnet.ibm.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+
+_cleanup()
+{
+	_cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt qcow2
+_supported_proto generic
+_supported_os Linux
+
+size=128M
+
+echo
+echo "== Checking that image is clean on shutdown =="
+
+IMGOPTS="compat=1.1,lazy_refcounts=on"
+_make_test_img $size
+
+$QEMU_IO -c "write -P 0x5a 0 512" $TEST_IMG | _filter_qemu_io
+
+# The dirty bit must not be set
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+_check_test_img
+
+echo
+echo "== Creating a dirty image file =="
+
+IMGOPTS="compat=1.1,lazy_refcounts=on"
+_make_test_img $size
+
+old_ulimit=$(ulimit -c)
+ulimit -c 0 # do not produce a core dump on abort(3)
+$QEMU_IO -c "write -P 0x5a 0 512" -c "abort" $TEST_IMG | _filter_qemu_io
+ulimit -c "$old_ulimit"
+
+# The dirty bit must be set
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+_check_test_img
+
+echo
+echo "== Read-only access must still work =="
+
+$QEMU_IO -r -c "read -P 0x5a 0 512" $TEST_IMG | _filter_qemu_io
+
+# The dirty bit must be set
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+
+echo
+echo "== Repairing the image file must succeed =="
+
+$QEMU_IMG check -r all $TEST_IMG
+
+# The dirty bit must not be set
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+
+echo
+echo "== Data should still be accessible after repair =="
+
+$QEMU_IO -c "read -P 0x5a 0 512" $TEST_IMG | _filter_qemu_io
+
+echo
+echo "== Opening a dirty image read/write should repair it =="
+
+IMGOPTS="compat=1.1,lazy_refcounts=on"
+_make_test_img $size
+
+old_ulimit=$(ulimit -c)
+ulimit -c 0 # do not produce a core dump on abort(3)
+$QEMU_IO -c "write -P 0x5a 0 512" -c "abort" $TEST_IMG | _filter_qemu_io
+ulimit -c "$old_ulimit"
+
+# The dirty bit must be set
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+
+$QEMU_IO -c "write 0 512" $TEST_IMG | _filter_qemu_io
+
+# The dirty bit must not be set
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+
+echo
+echo "== Creating an image file with lazy_refcounts=off =="
+
+IMGOPTS="compat=1.1,lazy_refcounts=off"
+_make_test_img $size
+
+old_ulimit=$(ulimit -c)
+ulimit -c 0 # do not produce a core dump on abort(3)
+$QEMU_IO -c "write -P 0x5a 0 512" -c "abort" $TEST_IMG | _filter_qemu_io
+ulimit -c "$old_ulimit"
+
+# The dirty bit must not be set since lazy_refcounts=off
+./qcow2.py $TEST_IMG dump-header | grep incompatible_features
+_check_test_img
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
+

tests/qemu-iotests/039.out

+QA output created by 039
+
+== Checking that image is clean on shutdown ==
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 lazy_refcounts=on 
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+incompatible_features     0x0
+No errors were found on the image.
+
+== Creating a dirty image file ==
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 lazy_refcounts=on 
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+incompatible_features     0x1
+ERROR OFLAG_COPIED: offset=8000000000050000 refcount=0
+ERROR cluster 5 refcount=0 reference=1
+
+2 errors were found on the image.
+Data may be corrupted, or further writes to the image may corrupt it.
+
+== Read-only access must still work ==
+read 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+incompatible_features     0x1
+
+== Repairing the image file must succeed ==
+ERROR OFLAG_COPIED: offset=8000000000050000 refcount=0
+Repairing cluster 5 refcount=0 reference=1
+No errors were found on the image.
+incompatible_features     0x0
+
+== Data should still be accessible after repair ==
+read 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== Opening a dirty image read/write should repair it ==
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 lazy_refcounts=on 
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+incompatible_features     0x1
+ERROR OFLAG_COPIED: offset=8000000000050000 refcount=0
+Repairing cluster 5 refcount=0 reference=1
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+incompatible_features     0x0
+
+== Creating an image file with lazy_refcounts=off ==
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 
+wrote 512/512 bytes at offset 0
+512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+incompatible_features     0x0
+No errors were found on the image.
+*** done

tests/qemu-iotests/group

@@ -45,3 +45,4 @@
 036 rw auto quick
 037 rw auto backing
 038 rw auto backing
+039 rw auto