Users may pass the following parameters to qemu:
    $ qemu-kvm -net nic -net user,smb= ...
    $ qemu-kvm -net nic -net user,smb ...
    $ qemu-kvm -net nic -net user,smb=bad_directory ...

In these cases, qemu started successfully while samba server
failed to start. Users will confuse since samba server
failed silently without any indication of what it did wrong.

To avoid it, we check whether the shared directory exist and
if users have permission to access this directory when QEMU's
"built-in" SMB server is enabled.
Signed-off-by: NDunrong Huang <riegamaths@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

When using guestfwd=, Qemu only connects the virtual server's TCP port
to a single chardev. This is useless in most cases, as we usually want
to have more than a single connection from the guest to the outside world.

This patch adds a new cmd: target to guestfwd= that allows for execution
of a command on every TCP connection. This leverages the same code as
the -smb parameter, just that here the command is user defined.
Reported-by: NSascha Wilde <wilde@intevation.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Windows 7 (and possibly other versions) cannot connect to the samba
share if the exported host directory is not world-readable. This can be
resolved by forcing the username used for access checks to the one
under which QEMU and smbd are running.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>

Add functions deposit32(), deposit64(), extract32() and extract64()
to extract and deposit bitfields in 32 and 64 bit words. Based on
ideas by Jia Liu and Avi Kivity.
Suggested-by: NJia Liu <proljc@gmail.com>
Suggested-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rephrase some of the expressions used to select an entry
in the SSE op table arrays so that it's clearer that they
don't overrun the op table array size.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The X86_64_DEF macro is a confusing way of making some terms
in a conditional only appear if TARGET_X86_64 is defined. We
only use it in two places, and in both cases this is for making
the same test, so abstract that check out into a function
where we can use a more conventional #ifdef.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 11f8cdbc removed all the uses of the X86_64_ONLY
macro. The BUGGY_64() macro has been unused for a long time:
it originally marked some ops which couldn't be enabled
because of issues with the pre-TCG code generation scheme.
Remove the now-unnecessary definitions of both macros.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Makes sure the following files are ignored:

  libcacard/.libs/
  libcacard/libcacard.la
  libcacard/libcacard.pc
  libcacard/libcacard/
  libcacard/osdep.lo
  libcacard/oslib-posix.lo
  libcacard/qemu-thread-posix.lo
  libcacard/qemu-timer-common.lo
  libcacard/trace.lo
  libcacard/trace/
  tests/test-visitor-serialization
  vscclient
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  hw/cadence_gem: Make rx_desc_addr and tx_desc_addr uint32_t
  i.MX31: KZM-ARM11-01 evaluation board
  i.MX31: Interrupt Controller
  i.MX31: Timers
  i.MX31: Clock Control Module
  i.MX: UART support
  Exynos4: add RTC device
  hw/exynos4210.c: Fix misleading initialization of IROM mirror
  hw/exynos4210_pwm.c: Fix STOP status in tick handler.
  ARM: hw/exynos4210_mct.c: Fix a bug which hangs Linux kernel.

commit c4baa050 improved SSE table
type safety which now raises compiler errors when latest QEMU was
configured with --enable-debug.

Fix this by splitting the SSE tables even further to separate
helper functions with different signatures.

Instead of crashing by calling address 0, the code now jumps to
label illegal_op.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make the state fields rx_desc_addr and tx_desc_addr uint32_t;
this matches the VMStateDescription, and also conforms to how
hardware works: the registers don't magically become larger
if the device is attached to a CPU with a larger physical
address size. It also fixes a compile failure if the
target_phys_addr_t type is changed to 64 bits.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>

Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the Freescale i.MX31.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the Freescale i.MX31 advanced vectored interrupt controller, at least
to the extent it is used by Linux 3.x

Vectors are not implemented.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the timers on the Freescale i.MX31 SoC.
This is not a complete implementation, but gives enough for
Linux to boot and run. In particular external triggers, which are
not useful under QEMU, are not implemented.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For Linux to be able to work out how fast its clocks are going, so
that timer ticks come approximately at the right time, it needs to
be able to query the clock control module (CCM).

This is the start of a CCM implementation.  It currently knows only about
the MCU, HSP and IPG clocks --- i.e., the ones used to feed the periodic
and general purpose timers.
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the Freescale i.MX UART.  This uart is used in a variety of
SoCs, including some by Motorola, as well as in the Freescale i.MX
series.

This patch gives only a `bare-bones' implementation, enough to run Linux
or OKL4, but that's about it.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NOleg Ogurtsov <o.ogurtsov@samsung.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We want to mirror whole IROM and should pass zero instead of
EXYNOS4210_IROM_BASE_ADDR (though it equals to zero too) since
memory_region_init_alias takes an offset within an original
region as an argument.
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

START/STOP bit was not cleaned correctly.
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

After some long period of time Linux kernel hanged due to
ptimer_get_count may return 0 before timer interrupt occurs,
thus, causing FRC to jump back in time
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Link in oslib objects also for BSD user, but avoid using the version of
qemu_vmalloc() defined in oslib-posix.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename what is remaining of op_helper.c to seg_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move memory access helpers to mem_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move various functions to misc_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move SMM helpers to smm_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move SVM helpers to svm_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move integer and bit field helpers to int_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move condition code helpers to cc_helper.c.

Move the shared inline functions lshift(), cpu_load_eflags() and
cpu_cc_compute_all() to cpu.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Adjust function names and add an explicit CPUX86State
parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move shift templates from helper_template.h to
shift_helper_template.h and the condition code helpers
to cc_helper_template.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style in helper_template.h before next commit.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

SSE function tables could easily be corrupted because of use
of void pointers.

Introduce function pointer types and helper variables in order
to improve type safety.

Split sse_op_table3 according to types used.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move FPU and MMX/SSE helpers to fpu_helpers.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style in ops_sse.h before next commit.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

After the previous patch, we can use the proper
declaration in a common header file.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move exception handlers from op_helper.c to excp_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().

Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style and a few typos.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The emulated devices can run simultaneously with the guest, so
we need to be careful with ordering of load and stores done by
them to the guest system memory, which need to be observed in
the right order by the guest operating system.

This adds a barrier call to the basic DMA read/write ops which
is currently implemented as a smp_mb(), but could be later
improved for more fine grained control of barriers.

Additionally, a _relaxed() variant of the accessors is provided
to easily convert devices who would be performance sensitive
and negatively impacted by the change.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently the pseries machine emulation does not support DMA for emulated
PCI devices, because the PAPR spec always requires a (guest visible,
paravirtualized) IOMMU which was not implemented.  Now that we have
infrastructure for IOMMU emulation, we can correct this and allow PCI DMA
for pseries.

With the existing PAPR IOMMU code used for VIO devices, this is almost
trivial. We use a single DMAContext for each (virtual) PCI host bridge,
which is the usual configuration on real PAPR machines (which often have
_many_ PCI host bridges).

Cc: Alex Graf <agraf@suse.de>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>