提交 599b9a5a 编写于 作者: B Blue Swirl

x86: split off exception handlers

Move exception handlers from op_helper.c to excp_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
上级 77b2bc2c
obj-y += translate.o op_helper.o helper.o cpu.o
obj-y += excp_helper.o
obj-$(CONFIG_SOFTMMU) += machine.o arch_memory_mapping.o arch_dump.o
obj-$(CONFIG_KVM) += kvm.o hyperv.o
obj-$(CONFIG_LINUX_USER) += ioport-user.o
......
......@@ -1071,12 +1071,16 @@ void cpu_x86_inject_mce(Monitor *mon, CPUX86State *cenv, int bank,
uint64_t status, uint64_t mcg_status, uint64_t addr,
uint64_t misc, int flags);
/* op_helper.c */
void do_interrupt(CPUX86State *env);
void do_interrupt_x86_hardirq(CPUX86State *env, int intno, int is_hw);
/* excp_helper.c */
void QEMU_NORETURN raise_exception(CPUX86State *env, int exception_index);
void QEMU_NORETURN raise_exception_err(CPUX86State *env, int exception_index,
int error_code);
void QEMU_NORETURN raise_interrupt(CPUX86State *nenv, int intno, int is_int,
int error_code, int next_eip_addend);
/* op_helper.c */
void do_interrupt(CPUX86State *env);
void do_interrupt_x86_hardirq(CPUX86State *env, int intno, int is_hw);
void do_smm_enter(CPUX86State *env1);
......
/*
* x86 exception helpers
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "cpu.h"
#include "qemu-log.h"
#include "helper.h"
#if 0
#define raise_exception_err(env, a, b) \
do { \
qemu_log("raise_exception line=%d\n", __LINE__); \
(raise_exception_err)(env, a, b); \
} while (0)
#endif
void helper_raise_interrupt(CPUX86State *env, int intno, int next_eip_addend)
{
raise_interrupt(env, intno, 1, 0, next_eip_addend);
}
void helper_raise_exception(CPUX86State *env, int exception_index)
{
raise_exception(env, exception_index);
}
/* This should come from sysemu.h - if we could include it here... */
void qemu_system_reset_request(void);
/*
* Check nested exceptions and change to double or triple fault if
* needed. It should only be called, if this is not an interrupt.
* Returns the new exception number.
*/
static int check_exception(CPUX86State *env, int intno, int *error_code)
{
int first_contributory = env->old_exception == 0 ||
(env->old_exception >= 10 &&
env->old_exception <= 13);
int second_contributory = intno == 0 ||
(intno >= 10 && intno <= 13);
qemu_log_mask(CPU_LOG_INT, "check_exception old: 0x%x new 0x%x\n",
env->old_exception, intno);
#if !defined(CONFIG_USER_ONLY)
if (env->old_exception == EXCP08_DBLE) {
if (env->hflags & HF_SVMI_MASK) {
cpu_vmexit(env, SVM_EXIT_SHUTDOWN, 0); /* does not return */
}
qemu_log_mask(CPU_LOG_RESET, "Triple fault\n");
qemu_system_reset_request();
return EXCP_HLT;
}
#endif
if ((first_contributory && second_contributory)
|| (env->old_exception == EXCP0E_PAGE &&
(second_contributory || (intno == EXCP0E_PAGE)))) {
intno = EXCP08_DBLE;
*error_code = 0;
}
if (second_contributory || (intno == EXCP0E_PAGE) ||
(intno == EXCP08_DBLE)) {
env->old_exception = intno;
}
return intno;
}
/*
* Signal an interruption. It is executed in the main CPU loop.
* is_int is TRUE if coming from the int instruction. next_eip is the
* EIP value AFTER the interrupt instruction. It is only relevant if
* is_int is TRUE.
*/
static void QEMU_NORETURN raise_interrupt2(CPUX86State *env, int intno,
int is_int, int error_code,
int next_eip_addend)
{
if (!is_int) {
cpu_svm_check_intercept_param(env, SVM_EXIT_EXCP_BASE + intno,
error_code);
intno = check_exception(env, intno, &error_code);
} else {
cpu_svm_check_intercept_param(env, SVM_EXIT_SWINT, 0);
}
env->exception_index = intno;
env->error_code = error_code;
env->exception_is_int = is_int;
env->exception_next_eip = env->eip + next_eip_addend;
cpu_loop_exit(env);
}
/* shortcuts to generate exceptions */
void QEMU_NORETURN raise_interrupt(CPUX86State *env, int intno, int is_int,
int error_code, int next_eip_addend)
{
raise_interrupt2(env, intno, is_int, error_code, next_eip_addend);
}
void raise_exception_err(CPUX86State *env, int exception_index,
int error_code)
{
raise_interrupt2(env, exception_index, 0, error_code, 0);
}
void raise_exception(CPUX86State *env, int exception_index)
{
raise_interrupt2(env, exception_index, 0, 0, 0);
}
......@@ -138,14 +138,6 @@ static inline void cpu_load_efer(CPUX86State *env, uint64_t val)
}
}
#if 0
#define raise_exception_err(env, a, b) \
do { \
qemu_log("raise_exception line=%d\n", __LINE__); \
(raise_exception_err)(env, a, b); \
} while (0)
#endif
static const uint8_t parity_table[256] = {
CC_P, 0, 0, CC_P, 0, CC_P, CC_P, 0,
0, CC_P, CC_P, 0, CC_P, 0, 0, CC_P,
......@@ -1529,101 +1521,6 @@ void do_interrupt_x86_hardirq(CPUX86State *env1, int intno, int is_hw)
env = saved_env;
}
/* This should come from sysemu.h - if we could include it here... */
void qemu_system_reset_request(void);
/*
* Check nested exceptions and change to double or triple fault if
* needed. It should only be called, if this is not an interrupt.
* Returns the new exception number.
*/
static int check_exception(CPUX86State *env, int intno, int *error_code)
{
int first_contributory = env->old_exception == 0 ||
(env->old_exception >= 10 &&
env->old_exception <= 13);
int second_contributory = intno == 0 ||
(intno >= 10 && intno <= 13);
qemu_log_mask(CPU_LOG_INT, "check_exception old: 0x%x new 0x%x\n",
env->old_exception, intno);
#if !defined(CONFIG_USER_ONLY)
if (env->old_exception == EXCP08_DBLE) {
if (env->hflags & HF_SVMI_MASK) {
cpu_vmexit(env, SVM_EXIT_SHUTDOWN, 0); /* does not return */
}
qemu_log_mask(CPU_LOG_RESET, "Triple fault\n");
qemu_system_reset_request();
return EXCP_HLT;
}
#endif
if ((first_contributory && second_contributory)
|| (env->old_exception == EXCP0E_PAGE &&
(second_contributory || (intno == EXCP0E_PAGE)))) {
intno = EXCP08_DBLE;
*error_code = 0;
}
if (second_contributory || (intno == EXCP0E_PAGE) ||
(intno == EXCP08_DBLE)) {
env->old_exception = intno;
}
return intno;
}
/*
* Signal an interruption. It is executed in the main CPU loop.
* is_int is TRUE if coming from the int instruction. next_eip is the
* EIP value AFTER the interrupt instruction. It is only relevant if
* is_int is TRUE.
*/
static void QEMU_NORETURN raise_interrupt2(CPUX86State *env, int intno,
int is_int, int error_code,
int next_eip_addend)
{
if (!is_int) {
cpu_svm_check_intercept_param(env, SVM_EXIT_EXCP_BASE + intno,
error_code);
intno = check_exception(env, intno, &error_code);
} else {
cpu_svm_check_intercept_param(env, SVM_EXIT_SWINT, 0);
}
env->exception_index = intno;
env->error_code = error_code;
env->exception_is_int = is_int;
env->exception_next_eip = env->eip + next_eip_addend;
cpu_loop_exit(env);
}
/* shortcuts to generate exceptions */
static void QEMU_NORETURN raise_interrupt(CPUX86State *nenv,
int intno, int is_int,
int error_code,
int next_eip_addend)
{
env = nenv;
raise_interrupt2(env, intno, is_int, error_code, next_eip_addend);
}
void raise_exception_err(CPUX86State *nenv, int exception_index,
int error_code)
{
env = nenv;
raise_interrupt2(env, exception_index, 0, error_code, 0);
}
void raise_exception(CPUX86State *nenv, int exception_index)
{
env = nenv;
raise_interrupt2(env, exception_index, 0, 0, 0);
}
/* SMM support */
#if defined(CONFIG_USER_ONLY)
......@@ -5221,16 +5118,6 @@ void helper_reset_rf(void)
env->eflags &= ~RF_MASK;
}
void helper_raise_interrupt(CPUX86State *env, int intno, int next_eip_addend)
{
raise_interrupt(env, intno, 1, 0, next_eip_addend);
}
void helper_raise_exception(CPUX86State *env, int exception_index)
{
raise_exception(env, exception_index);
}
void helper_cli(void)
{
env->eflags &= ~IF_MASK;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册