- 07 10月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
We now only assign strdup()ed strings to these fields, never static strings. aliguori: fix build for ppc_prep and mips_jazz Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2009 3 次提交
-
-
由 Markus Armbruster 提交于
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Everything using standard isa I/O ports and IRQ windup is considerd being an actual isa device. That are all serial_init() users except mips_mipssim() which seems to have a non-standard IRQ windup. baud rate is fixed at 115200 now as no caller passed in something else. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 10月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 21 9月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
The CPU state parameter is not used, remove it and adjust callers. Now we can compile ioport.c once for all targets. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 20 9月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 16 9月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 15 9月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Changes: * added isa bus, hooked up to the system bus. Not sure this is correct, but 'info pci' lists lists no pci-isa bridge in the machine ...). * switches the default cpu to one which actually works. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 10 9月, 2009 5 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
drop old init path and switch remaining users to isa_create_simple(). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Also split the isa bits into a separate source file, so we don't drag in a dependency for isa-bus.o for machines which want ne2k_pci only. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Lot of ISA devices work at fixed addresses, so having iobase as bus property doesn't make much sense. Devices which can have different iobases will get a device property. Also simply hard-code stuff which can't be configured anyway. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Drop num_ports argument for usb_ohci_init_pci(), everybody calls it with num_ports == 3, so it is pointless. Convert ohci pci device into qdev. TODO: convert non-pci ohci adapters. You can add a OHCI USB Controller to your virtual pc now using '-device pci-ohci'. Specifying a id is a good idea, so you can attach usb devices to it, like this: -device pci-ohci,id=ohci -device usb-mouse,bus=ohci.0 Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 9月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 8月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
create ide-isa.c and place isa bus support there. only build ide-isa support for platforms using it. also create ide.h header file. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Changes: (1) make isa-bus maintain isa irqs, complain when allocating already taken irqs. (2) note that (1) works only for isa devices converted to qdev already (floppy and ps2/kbd/mouse right now), so more work is needed to make this really useful. (3) split floppy init into isa and sysbus versions. (4) add sysbus->isa bridge & fix -M isapc breakage. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 26 8月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 16 8月, 2009 2 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
We define inline as always_inline. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 28 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 7月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
I used the following command to enable debugging: perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/* Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 30 6月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
This reverts commit 8217606e (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 6月, 2009 1 次提交
-
-
由 Markus Armbruster 提交于
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 6月, 2009 1 次提交
-
-
由 Avi Kivity 提交于
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Look for bios and other support files relative to qemu binary, rather than a hardcoded prefix. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 22 5月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 5月, 2009 1 次提交
-
-
由 Anthony Liguori 提交于
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
BIOS_SIZE is no longer needed by vl.c, so there's no point having it in sysemu.h. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 14 5月, 2009 2 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Paul Brook 提交于
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 12 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Now we can safely call AUD_init multiple times we can push it down to individual audio devices, rather than having to pass it from the board init. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 08 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 12 4月, 2009 1 次提交
-
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 10 4月, 2009 2 次提交
-
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7056 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 12 2月, 2009 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6611 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 2月, 2009 1 次提交
-
-
由 aliguori 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 25 1月, 2009 1 次提交
-
-
由 aurel32 提交于
On the MIPS Magnum, the time that is held in the RTC's NVRAM should be relative to midnight on 1980-01-01. This patch adds an extra parameter to rtc_init(), allowing different epochs to be used. For the Magnum, 1980 is specified, and for all other machines, 2000 is specified. I've not modified the handling of the century byte, as with an epoch of 1980 and a year of 2009, one could argue that it should hold either 0, 1, 19 or 20. NT 3.50 on MIPS does not read the century byte. Signed-off-by: NStuart Brady <stuart.brady@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6429 c046a42c-6fe2-441c-8c8c-71466251a162
-