Because now all PCI devices are converted to qdev.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

bus is always NULL so the code in this if clause is dead (and therefore
untested).
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a "shallow", half hearted, and untested conversion.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* pmaydell/arm-devs.for-upstream:
  arm: SoC model for Calxeda Highbank
  arm_boot: support board IDs more than 16 bits wide
  arm: add secondary cpu boot callbacks to arm_boot.c
  ahci: add support for non-PCI based controllers
  Add xgmac ethernet model

* kwolf/for-anthony: (22 commits)
  scsi: Guard against buflen exceeding req->cmd.xfer in scsi_disk_emulate_command
  qcow: Use bdrv functions to replace file operation
  qcow: Return real error code in qcow_open
  block/vdi: Zero unused parts when allocating a new block (fix #919242)
  virtio-blk: add virtio_blk_handle_read trace event
  docs: describe live block operations
  block: add support for partial streaming
  add QERR_BASE_NOT_FOUND
  block: add bdrv_find_backing_image
  blockdev: make image streaming safe across hotplug
  qmp: add query-block-jobs
  qmp: add block_job_cancel command
  qmp: add block_job_set_speed command
  qmp: add block_stream command
  block: rate-limit streaming operations
  block: add image streaming block job
  block: add BlockJob interface for long-running operations
  block: make copy-on-read a per-request flag
  block: check bdrv_in_use() before blockdev operations
  coroutine: add co_sleep_ns() coroutine sleep function
  ...

Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

A device reset does not affect the link state, only set_link does.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

A device reset does not affect the link state, only set_link does.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

By using strncasecmp, we allow for arbitrary characters after the
"on"/"off" string. Fix this by switching to strcasecmp.
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Limit the return value (corresponding to the length of the buffer to be
DMAed back to the intiator) to the value in req->cmd.xfer, which is the
amount of data that the initiator expects. Eliminate now-duplicate code
that does this guarding in the functions for individual commands.

Without this, the SCRIPTS code in the emulated LSI device eventually
raises a DMA interrupt for a data overrun when an INQUIRY command whose
buflen exceeds req->cmd.xfer is processed. It's the responsibility of
the client to provide a request buffer and allocation length that are
large enough for the result of the command.
Signed-off-by: NThomas Higdon <thigdon@akamai.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Since common file operation functions lack of error detection and use
much more I/O syscalls, so change them to bdrv series functions and
reduce I/O request.
Signed-off-by: NLi Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLi Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The new block was filled with zero when it was allocated by g_malloc0,
but when it was reused later and only partially used, data from the
previously allocated block were still present and written to the new
block.

This caused the problems reported by bug #919242
(https://bugs.launchpad.net/qemu/+bug/919242).

Now the unused parts of the new block which are before and after the data
are always filled with zero, so it is no longer necessary to zero the whole
block with g_malloc0.

I also updated the copyright comment.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There already exists a virtio_blk_handle_write trace event as well as
completion events.  Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add support for streaming data from an intermediate section of the
image chain (see patch and documentation for details).
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This qerror will be raised when a given streaming base (backing file)
cannot be found.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add bdrv_find_backing_image: given a BlockDriverState pointer, and an id,
traverse the backing image chain to locate the id.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Unplugging a storage interface like virtio-blk causes the host block
device to be deleted too.  Long-running operations like block migration
must take a DriveInfo reference to prevent the BlockDriverState from
being freed.  For image streaming we can do the same thing.

Note that it is not possible to acquire/release the drive reference in
block.c where the block job functions live because
drive_get_ref()/drive_put_ref() are blockdev.c functions.  Calling them
from block.c would be a layering violation - tools like qemu-img don't
even link against blockdev.c.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add query-block-jobs, which shows the progress of ongoing block device
operations.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add block_job_set_speed, which sets the maximum speed for a background
block operation.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add the block_stream command, which starts copy backing file contents
into the image file.  Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes.  Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Adds support for Calxeda's Highbank SoC.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Support passing a board ID value to the kernel in r1
that is more than 16 bits wide. This is needed to pass
the '-1 == invalid' value for boards which only support
device tree booting.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NMark Langsdorf <mark.langsdorf@calxeda.com>

Create two functions, write_secondary_boot() and secondary_cpu_reset_hook(),
to allow platforms more control of how secondary CPUs are brought up. The
new functions default to NULL and aren't called unless they are populated
so there are no changes to existing platform models.
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add support for ahci on sysbus.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This adds very basic support for the xgmac ethernet core. Missing things
include:

- statistics counters
- WoL support
- rx checksum offload
- chained descriptors (only linear descriptor ring)
- broadcast and multicast handling
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch implements rate-limiting for image streaming.  If we've
exceeded the bandwidth quota for a 100 ms time slice we sleep the
coroutine until the next slice begins.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Previously copy-on-read could only be enabled for all requests to a
block device.  This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.

For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image.  Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.

Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests.  Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Long-running block operations like block migration and image streaming
must have continual access to their block device.  It is not safe to
perform operations like hotplug, eject, change, resize, commit, or
external snapshot while a long-running operation is in progress.

This patch adds the missing bdrv_in_use() checks so that block migration
and image streaming never have the rug pulled out from underneath them.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Most of the codebase as been converted to use glib memory allocation
functions.  There are still a few instances of malloc/calloc in the
block layer and qemu-io.  Replace them, especially since they do not
check the strdup/malloc/calloc return value.
Reported-by: NDr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NGreg Farnum <gregory.farnum@dreamhost.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Remove target dependencies and compile Cirrus VGA in hwlib.

Address masking can be removed since memory API handles that now.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Instead of each target knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>