qmp: add block_job_cancel command

Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

QMP/qmp-events.txt

@@ -293,3 +293,27 @@ Example:
                "len": 10737418240, "offset": 10737418240,
                "speed": 0 },
      "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
+
+
+BLOCK_JOB_CANCELLED
+-------------------
+
+Emitted when a block job has been cancelled.
+
+Data:
+
+- "type":     Job type ("stream" for image streaming, json-string)
+- "device":   Device name (json-string)
+- "len":      Maximum progress value (json-int)
+- "offset":   Current progress value (json-int)
+              On success this is equal to len.
+              On failure this is less than len.
+- "speed":    Rate limit, bytes per second (json-int)
+
+Example:
+
+{ "event": "BLOCK_JOB_CANCELLED",
+     "data": { "type": "stream", "device": "virtio-disk0",
+               "len": 10737418240, "offset": 134217728,
+               "speed": 0 },
+     "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }

blockdev.c

@@ -928,7 +928,11 @@ static void block_stream_cb(void *opaque, int ret)
         qdict_put(dict, "error", qstring_from_str(strerror(-ret)));
     }
 
-    monitor_protocol_event(QEVENT_BLOCK_JOB_COMPLETED, obj);
+    if (block_job_is_cancelled(bs->job)) {
+        monitor_protocol_event(QEVENT_BLOCK_JOB_CANCELLED, obj);
+    } else {
+        monitor_protocol_event(QEVENT_BLOCK_JOB_COMPLETED, obj);
+    }
     qobject_decref(obj);
 }
 
@@ -989,3 +993,16 @@ void qmp_block_job_set_speed(const char *device, int64_t value, Error **errp)
         error_set(errp, QERR_NOT_SUPPORTED);
     }
 }
+
+void qmp_block_job_cancel(const char *device, Error **errp)
+{
+    BlockJob *job = find_block_job(device);
+
+    if (!job) {
+        error_set(errp, QERR_DEVICE_NOT_ACTIVE, device);
+        return;
+    }
+
+    trace_qmp_block_job_cancel(job);
+    block_job_cancel(job);
+}

hmp-commands.hx

@@ -95,6 +95,20 @@ STEXI
 @item block_job_set_stream
 @findex block_job_set_stream
 Set maximum speed for a background block operation.
+ETEXI
+
+    {
+        .name       = "block_job_cancel",
+        .args_type  = "device:B",
+        .params     = "device",
+        .help       = "stop an active block streaming operation",
+        .mhandler.cmd = hmp_block_job_cancel,
+    },
+
+STEXI
+@item block_job_cancel
+@findex block_job_cancel
+Stop an active block streaming operation.
 ETEXI
 
     {

hmp.c

@@ -805,3 +805,13 @@ void hmp_block_job_set_speed(Monitor *mon, const QDict *qdict)
 
     hmp_handle_error(mon, &error);
 }
+
+void hmp_block_job_cancel(Monitor *mon, const QDict *qdict)
+{
+    Error *error = NULL;
+    const char *device = qdict_get_str(qdict, "device");
+
+    qmp_block_job_cancel(device, &error);
+
+    hmp_handle_error(mon, &error);
+}

hmp.h

@@ -56,5 +56,6 @@ void hmp_change(Monitor *mon, const QDict *qdict);
 void hmp_block_set_io_throttle(Monitor *mon, const QDict *qdict);
 void hmp_block_stream(Monitor *mon, const QDict *qdict);
 void hmp_block_job_set_speed(Monitor *mon, const QDict *qdict);
+void hmp_block_job_cancel(Monitor *mon, const QDict *qdict);
 
 #endif

monitor.c

@@ -482,6 +482,9 @@ void monitor_protocol_event(MonitorEvent event, QObject *data)
         case QEVENT_BLOCK_JOB_COMPLETED:
             event_name = "BLOCK_JOB_COMPLETED";
             break;
+        case QEVENT_BLOCK_JOB_CANCELLED:
+            event_name = "BLOCK_JOB_CANCELLED";
+            break;
         default:
             abort();
             break;

monitor.h

@@ -37,6 +37,7 @@ typedef enum MonitorEvent {
     QEVENT_SPICE_INITIALIZED,
     QEVENT_SPICE_DISCONNECTED,
     QEVENT_BLOCK_JOB_COMPLETED,
+    QEVENT_BLOCK_JOB_CANCELLED,
     QEVENT_MAX,
 } MonitorEvent;
 

qapi-schema.json

@@ -1487,3 +1487,32 @@
 ##
 { 'command': 'block_job_set_speed',
   'data': { 'device': 'str', 'value': 'int' } }
+
+##
+# @block_job_cancel:
+#
+# Stop an active block streaming operation.
+#
+# This command returns immediately after marking the active block streaming
+# operation for cancellation.  It is an error to call this command if no
+# operation is in progress.
+#
+# The operation will cancel as soon as possible and then emit the
+# BLOCK_JOB_CANCELLED event.  Before that happens the job is still visible when
+# enumerated using query-block-jobs.
+#
+# The image file retains its backing file unless the streaming operation happens
+# to complete just as it is being cancelled.
+#
+# A new block streaming operation can be started at a later time to finish
+# copying all data from the backing file.
+#
+# @device: the device name
+#
+# Returns: Nothing on success
+#          If streaming is not active on this device, DeviceNotActive
+#          If cancellation already in progress, DeviceInUse
+#
+# Since: 1.1
+##
+{ 'command': 'block_job_cancel', 'data': { 'device': 'str' } }

qmp-commands.hx

@@ -660,6 +660,12 @@ EQMP
         .mhandler.cmd_new = qmp_marshal_input_block_job_set_speed,
     },
 
+    {
+        .name       = "block_job_cancel",
+        .args_type  = "device:B",
+        .mhandler.cmd_new = qmp_marshal_input_block_job_cancel,
+    },
+
     {
         .name       = "blockdev-snapshot-sync",
         .args_type  = "device:B,snapshot-file:s,format:s?",

trace-events

@@ -75,6 +75,7 @@ stream_one_iteration(void *s, int64_t sector_num, int nb_sectors, int is_allocat
 stream_start(void *bs, void *base, void *s, void *co, void *opaque) "bs %p base %p s %p co %p opaque %p"
 
 # blockdev.c
+qmp_block_job_cancel(void *job) "job %p"
 block_stream_cb(void *bs, void *job, int ret) "bs %p job %p ret %d"
 qmp_block_stream(void *bs, void *job) "bs %p job %p"