When -usb option is used, global varible usb_enabled is set.
And all the plaform will create one USB controller according
to this variable. In fact, global varibles make code hard
to read.

So this patch is to remove global variable usb_enabled and
add USB option in machine options. All the plaforms will get
USB option value from machine options.

USB option of machine options will be set either by:
  * -usb
  * -machine type=pseries,usb=on

Both these ways can work now. They both set USB option in
machine options. In the future, the first way will be removed.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This should help us to:
- More easily add or remove machine initialization arguments without
  having to change every single machine init function;
- More easily make mechanical changes involving the machine init
  functions in the future;
- Let machine initialization forward the init arguments to other
  functions more easily.

This change was half-mechanical process: first the struct was added with
the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local
variable initialization to all functions. Then the compiler helped me
locate the local variables that are unused, so they could be removed.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It is more readable, and all other code does it like that, too.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Pass it through to arm_pic_cpu_handler().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)

In particular this simplifies the &s->mpu->cpu->env expression again.

first_cpu and ->next_cpu are expected to be QOM'ified later.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

Needed for arm_load_kernel().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>

- add support for the 64MB NOR CFI01 flash available at
0x34000000 on the versatilepb board
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0225d/BBAJIHEC.html

- tested with barebox bootloader
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add ds1338 rtc attached on i2c.
Signed-off-by: NOskar Andero <oskar.andero@gmail.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Scripted conversion:
  for file in hw/arm-misc.h hw/arm_boot.c hw/arm_pic.c hw/armv7m.c hw/exynos4210.h hw/highbank.c hw/integratorcp.c hw/musicpal.c hw/omap.h hw/pxa.h hw/pxa2xx_gpio.c hw/pxa2xx_pic.c hw/realview.c hw/strongarm.h hw/versatilepb.c hw/vexpress.c  hw/xilinx_zynq.c ; do
    sed -i "s/CPUState/CPUARMState/g" $file
  done
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove the uhci and ohci init wrappers, which all wrapped a
pci_create_simple() one-liner.  Switch callsites to call
pci_create_simple directly.  Remove the header files where
the wrappers where declared.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The primecell.h header now only has the definitions of constants
indicating the usage of the arm_sysctl GPIO lines; remove obsolete
includes of it from source files which don't care about those GPIO
lines.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The ARM devboard models (vexpress-a9, realview, versatilepb, etc)
were accidentally trying to set one of the arm_sysctl properties
after device init. This has now become a fatal error; set the property
before device init where it should be done instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This was done in a mostly automated fashion.  I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.

The first step was a sed-based addition of the parent type to the subclass
registration functions.

The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.

Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.

We are almost fully converted to QOM after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently creating a memory region automatically registers it for
live migration.  This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.

Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration.  Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

This driver emulates the ARM AACI interface (PL041) connected to a LM4549 codec.
It enables audio playback for the Versatile/PB platform.

Limitations:
- Supports only a playback on one channel (Versatile/Vexpress)
- Supports only one TX FIFO in compact-mode or non-compact mode.
- Supports playback of 12, 16, 18 and 20 bits samples.
- Record is not supported.
- The PL041 is hardwired to a LM4549 codec.

Versatile/PB test build:
linux-2.6.38.5
buildroot-2010.11
alsa-lib-1.0.22
alsa-utils-1.0.22
mpg123-0.66

Qemu host: Ubuntu 10.04 in Vmware/OS X

Playback tested successfully with speaker-test/aplay/mpg123.
Signed-off-by: NMathieu Sonet <contact@elasticsheep.com>
[Peter Maydell: fixed typo in code clearing SL1RXBUSY/SL2RXBUSY
 bits, as spotted by Andrzej Zaborowski]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Clean up versatile_pci to expose the various PCI mmio regions
properly as separate mmio regions rather than as a single mmio
which uses callbacks to map and unmap everything.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On the Versatile PB, PL110 graphics adaptor only natively supports
5551 pixel format; an external mux swaps bits around to allow
RGB565 and BGR565, under the control of bits [1:0] in the SYS_CLCD
system register.

Implement these SYS_CLCD register bits, and use a gpio line to
feed them out of the system register model, across the versatilepb
board and into the pl110 so we can select the right format.

This is necessary as recent Linux versatile kernels default to
programming the CLCD and mux for 16 bit BGR rather than 16 bit RGB.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Correct typos of "licenced" to "licensed".
Reviewed-by: NStefan Weil <weil@mail.berlios.de>
Reviewed-by: NAndreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: NMatthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Correct the condition determining whether we instantiate the onboard
NIC or a PCI card NIC on VersatilePB and Realview boards. This was broken
in two ways:
 (1) if the user asked for two default NICs ("-net nic -net nic") we would
crash trying to strcmp() a NULL pointer
 (2) if the user asked for two NICs explicitly of the same model as the
onboard NIC (eg "-net nic,model=smc91c111 -net nic,model=smc91c111")
we would try to instantiate two onboard NICs at the same address.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Changing block.h or blockdev.h resulted in recompiling most objects.

Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

These will be used to generate unique id strings for ramblocks.  The name
field is required, the device pointer is optional as most callers don't
have a device.  When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit f1698408.

PCI is always little-endian. Having a user-visible "be" property is just
plain wrong.

Push TARGET_WORDS_BIGENDIAN dependency to board level.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Guess core tile ID based on CPU type.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to
create the NIC.  When MODEL is unknown or "?", this prints to stderr
and terminates the program.

Change pci_nic_init() not to treat "?" specially, and to return NULL
on failure.  Switch uses during startup to new convenience wrapper
pci_nic_init_nofail(), which behaves just like pci_nic_init() used to
do.

Bonus bug fix: we now check for qdev_init() failing there.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: Nmalc <av1474@comtv.ru>

Drop num_ports argument for usb_ohci_init_pci(), everybody
calls it with num_ports == 3, so it is pointless.

Convert ohci pci device into qdev.
TODO: convert non-pci ohci adapters.

You can add a OHCI USB Controller to your virtual pc now using
'-device pci-ohci'.  Specifying a id is a good idea, so you can
attach usb devices to it, like this:

  -device pci-ohci,id=ohci
  -device usb-mouse,bus=ohci.0
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Sorry folks, but it has to be.  One more of these invasive qdev patches.

We have a serious design bug in the qdev interface:  device init
callbacks can't signal failure because the init() callback has no
return value.  This patch fixes it.

We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault.  This patch fixes it.

With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>