When -usb option is used, global varible usb_enabled is set.
And all the plaform will create one USB controller according
to this variable. In fact, global varibles make code hard
to read.

So this patch is to remove global variable usb_enabled and
add USB option in machine options. All the plaforms will get
USB option value from machine options.

USB option of machine options will be set either by:
  * -usb
  * -machine type=pseries,usb=on

Both these ways can work now. They both set USB option in
machine options. In the future, the first way will be removed.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

it was wrongly using serial_hds[0] instead of serial_hds[1]
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The DCBR0 register on 440 is used to implement system reset. The same
register is used on 405 as well, so just reuse the code.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Device tree properties need to be specified in big endian. Fix the
bamboo memory size property accordingly.
Signed-off-by: NAlexander Graf <agraf@suse.de>
CC: qemu-stable@nongnu.org

For all our PPC targets the physical address space is at least
36 bits, so drop an unnecessary preprocessor conditional check
on TARGET_PHYS_ADDR_SPACE_BITS (erroneously introduced as part
of the change from target_phys_addr_t to hwaddr). This brings
this bit of code into line with the way we handle the other
cases which were originally checking TARGET_PHYS_ADDR_BITS in
order to avoid compiler complaints about overflowing a 32 bit type.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove xtensa_sim_init that only explodes machine init args, rename
sim_init to xtensa_sim_init.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't explode QEMUMachineInitArgs before passing it to lx_init.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

If we try to do an out-of-tree build but the source tree we're building from
has been used in the past for an in-tree build then things will go
confusingly wrong. Specifically, some parts of the build process will pull
in generated files from the old in-tree build (because SRC_PATH is on
the vpath). Diagnose this situation so we can produce a useful error
message and tell the user how to fix it (run distclean in the source tree).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NCatalin Patulea <catalinp@google.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

OpenBIOS on sparc64 only support Standard VGA and not Cirrus VGA. Don't
build Cirrus VGA support so that it can't be selected.

This fixes the breakage introduced by commit f2898771.
Reported-by: NRichard Henderson <rth@twiddle.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Tested-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Remove out of date FIXME regarding saturating arithmetic
  target-arm: Implement abs_i32 inline rather than as a helper
  target-arm: Use TCG operation for Neon 64 bit negation
  arm-semi.c: Handle get/put_user() failure accessing arguments

When building qemu-kvm for openSUSE:Factory, I am getting a
warning in the pipe2 detection performed by configure, which
prevents using --enable-werror.

Change detection code to use return value of pipe2.
Signed-off-by: NBruce Rogers <brogers@suse.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Disable clang's initializer-overrides warnings, as QEMU makes significant
use of the pattern of initializing an array with a range-based default
entry like
    [0 ... 0x1ff] = { GPIO_NONE, 0 }
followed by specific entries which override that default, and clang
would otherwise warn "initializer overrides prior initialization of
this subobject" when it encountered the specific entry.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit ad0b5321 forgot to add
QEMU_MADV_HUGEPAGE macros for when CONFIG_MADVISE is not defined.
This broke the build for Windows. Fix it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/nbd-next: (30 commits)
  qmp: add NBD server commands
  block: add close notifiers
  block: prepare code for adding block notifiers
  qemu-sockets: add socket_listen, socket_connect, socket_parse
  tests: do not include tools-obj-y Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
  qemu-sockets: return InetSocketAddress from inet_parse
  qapi: add socket address types
  build: add QAPI files to the tools
  vnc: drop QERR_VNC_SERVER_FAILED
  qemu-sockets: add error propagation to Unix socket functions
  qemu-sockets: add error propagation to inet_parse
  qemu-sockets: add error propagation to inet_dgram_opts
  qemu-sockets: add error propagation to inet_connect_addr
  qemu-sockets: include strerror or gai_strerror output in error messages
  vnc: add error propagation to vnc_display_open
  vnc: reorganize code for reverse mode
  vnc: introduce a single label for error returns
  vnc: avoid Yoda conditionals
  qemu-ga: ask and print error information from qemu-sockets
  nbd: ask and print error information from qemu-sockets
  ...

Remove an out of date FIXME regarding the saturating arithmetic helpers:
we now do pass a pointer to CPUARMState to these helpers, and since
the AREG0 changes went in there is no difference between helper.c
and op_helper.c and therefore no point in moving the functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement abs_i32 inline (with movcond) rather than using a helper
function.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Use the TCG operation to do Neon 64 bit negations rather than calling
a helper routine for it.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rework the handling of arguments to ARM semihosting calls so that we
handle a possible failure return from get_user_ual() or put_user_ual().
(This incidentally silences a lot of warnings from clang about
"expression result unused").
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Adding an NBD server inside QEMU is trivial, since all the logic is
in nbd.c and can be shared easily between qemu-nbd and QEMU itself.
The main difference is that qemu-nbd serves a single unnamed export,
while QEMU serves named exports.
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There is no reason in principle to skip job cancellation and draining
of pending I/O when there is no medium in the disk.  Do these unconditionally,
which also prepares the code for the next patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These are QAPI-friendly versions of the qemu-sockets functions.  They
support IP sockets, Unix sockets, and named file descriptors, using a
QAPI union to dispatch to the correct function.
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We need them because qemu-sockets will soon be using SocketAddress.
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We now always return "nice" error messages in errp when we goto fail.
Drop the default error message.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before:

    $ qemu-system-x86_64 -monitor unix:/vvv,server=off
    connect(unix:/vvv): No such file or directory
    chardev: opening backend "socket" failed

After:

    $ x86_64-softmmu/qemu-system-x86_64 -monitor unix:/vvv,server=off
    qemu-system-x86_64: -monitor unix:/vvv,server=off: Failed to connect to socket: No such file or directory
    chardev: opening backend "socket" failed
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before:

    $ qemu-system-x86_64 -monitor udp:localhost:631@localhost:631
    inet_dgram_opts: bind(ipv4,127.0.0.1,631): OK
    inet_dgram_opts failed
    chardev: opening backend "udp" failed

After:

    $ x86_64-softmmu/qemu-system-x86_64 -monitor udp:localhost:631@localhost:631
    qemu-system-x86_64: -monitor udp:localhost:631@localhost:631: Failed to bind socket: Address already in use
    chardev: opening backend "udp" failed
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

perror and fprintf can be removed because all clients can now consume
Errors properly.  However, we'll need to change the non-blocking connect
handlers to take an Error, in order to improve error handling for
migration with the TCP protocol.

This is a minor degradation in error reporting for outgoing migration.
However, until 1.2 this case just failed without even attempting to
connect, so it is still an improvement as far as overall QoI is
concerned.
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Among others, before:

    $ qemu-system-x86_64 -chardev socket,port=12345,id=char
    inet_connect: host and/or port not specified
    chardev: opening backend "socket" failed

After:

    $ x86_64-softmmu/qemu-system-x86_64 -chardev socket,port=12345,id=char
    qemu-system-x86_64: -chardev socket,port=12345,id=char: host and/or port not specified
    chardev: opening backend "socket" failed

perror and fprintf can be removed because all clients can now
consume Errors properly.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before:

    $ qemu-system-x86_64 -vnc foo.bar:12345
    getaddrinfo(foo.bar,18245): Name or service not known
    Failed to start VNC server on `foo.bar:12345'

    $ qemu-system-x86_64 -vnc localhost:12345,reverse=on
    inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
    Failed to start VNC server on `localhost:12345,reverse=on'

After:

    $ x86_64-softmmu/qemu-system-x86_64 -vnc foo.bar:12345
    Failed to start VNC server on `foo.bar:12345': address resolution failed for foo.bar:18245: Name or service not known

    $ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:12345,reverse=on
    Failed to start VNC server on `localhost:12345,reverse=on': Failed to connect to socket: Connection refused
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid the dance between csock and vs->lsock.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Before:

    $ qemu-system-x86_64 nbd:localhost:12345
    inet_connect_opts: connect(ipv4,yakj.usersys.redhat.com,127.0.0.1,12345): Connection refused
    qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused

After:

    $ x86_64-softmmu/qemu-system-x86_64 nbd:localhost:12345
    qemu-system-x86_64: Failed to connect to socket: Connection refused
    qemu-system-x86_64: could not open disk image nbd:localhost:12345: Connection refused
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>