Currently, when there is an API that's blocking with locked domain and
second API that's waiting in virDomainObjListFindByUUID() for the domain
lock (with the domain list locked) no other API can be executed on any
domain on the whole hypervisor because all would wait for the domain
list to be locked.  This patch adds new optional approach to this in
which the domain is only ref'd (reference counter is incremented)
instead of being locked and is locked *after* the list itself is
unlocked.  We might consider only ref'ing the domain in the future and
leaving locking on particular APIs, but that's no tonight's fairy tale.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That function tries its best to create a bitmap of host NUMA nodes.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That function helps checking whether there's a task in that cgroup.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There's no need to implement ToString() function like we do if we
can use our shiny macros.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.

(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)

The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses.  In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).

The attribute looks like this in the configuration:

  <network>
    <name>test</name>
    <bridge name='br0' macTableManager='libvirt'/>
    ...

This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.

These two functions use netlink RTM_NEWNEIGH and RTM_DELNEIGH messages
to add and delete entries from a bridge's fdb. The bridge itself is
not referenced in the arguments to the functions, only the name of the
device that is attached to the bridge (since a device can only be
attached to one bridge at a time, and must be attached for this
function to make sense, the kernel easily infers which bridge's fdb is
being modified by looking at the device name/index).

These functions all set/get items in the sysfs for a bridge device.

https://bugzilla.redhat.com/show_bug.cgi?id=1159180

Move the API from the backend to storage_conf and rename it to
virStoragePoolGetVhbaSCSIHostParent.  A future patch will need to
use this functionality from storage_conf

Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.

To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.

To allow reuse this non-trivial parser code in the backing store parser
this part of the command line parser needs to be split out into a
separate funciton.

Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.

    <interface type="ethernet">
      <mac address="02:36:1d:18:2a:e4"/>
      <model type="virtio"/>
      <script path=""/>
      <target dev="tap361d182a-e4"/>
      <bandwidth>
        <inbound average="984" peak="1024" burst="64"/>
        <outbound average="2000" peak="2048" burst="128"/>
      </bandwidth>
    </interface>
Signed-off-by: NAnirban Chakraborty <abchak@juniper.net>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1160926

Introduce the ability to save a configuration of a persistent configuration
that may be changed by storage pool backend activity, such as start or stop

Commit 01b4de2b abstracts virDomainParseMemory()
for use by other functions in domain_conf.c
Extend the same for use, for functions outside of this file.
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around.  This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.

The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.

Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c851562) that doesn't support
non-contiguous nodesets.  It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.

[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.htmlSigned-off-by: NMartin Kletzander <mkletzan@redhat.com>

As of 90286418 the function is introduced. However, it's missing
an entry in the libvirt_private.syms so it can't be mocked.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

There was no check for 'nodeset' attribute in numatune-related
elements.  This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>

Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>

This function is used to cleanup a pidfile doing whatever it takes, even
killing the owning process.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Create the function from the code in getAdapterName() in order to return
the "host#" name for the provided parentaddr values.

Create/use virGetSCSIHostNumber to replace the static getHostNumber

Removed the "if (result &&" since result is now required to be non NULL
on input.

This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:

* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: NLaine Stump <laine@laine.org>

To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()

The helper checks whether a string contains only whitespace or is NULL.
This will be helpful to skip cases where a user string is optional, but
may be provided empty with the same meaning.

Our qemu monitor code has a converter from key-value pairs to a json
value object. I want to re-use the code later and having it part of the
monitor command generator is inflexible. Split it out into a separate
helper.

Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
    tcp:2001:0DB8::1428:4444,
but the correct address should be:
    tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>

Helper function to strip the brackets from an IPv6 address.
Tested by viruritest.

This same structure will be used to retrieve RX filter info for
interfaces on the host via netlink messages, and RX filter info for
interfaces on the guest via the qemu "query-rx-filter" command.

This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.

The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.

If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with

  'CreateMachine: File exists'

Additional processes can e.g. be added via

  echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks

but there are other cases like

  http://bugs.debian.org/761521

Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.

And add stubs to other drivers like: lxc, qemu, uml and vbox.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This internal API can be used to allocate or free some pages in
the huge pages pool.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of requiring the caller to format to/from strings,
add typesafe APIs todo this work.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are now two places in libvirt which use polkit. Currently
they use pkexec, which is set to be replaced by direct DBus API
calls. Add a common API which they will both be able to use for
this purpose.

No tests are added at this time, since the impl will be gutted
in favour of a DBus API call shortly.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add virCgroupNewIOThread() to mimic virCgroupNewVcpu() except the naming
scheme with use "iothread" rather than "vcpu".

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

To express empty drive we historically use storage source with empty
path. Unfortunately NBD disks may be declared without a path.

Add a helper to wrap this logic.