xl/libxl already supports qemu's network-based block backends
such as nbd and rbd. libvirt has supported configuring such
<disk>s for long time too. This patch adds support for rbd
disks in the libxl driver by generating a rbd device URL from
the virDomainDiskDef object. The URL is passed to libxl via the
pdev_path field of libxl_device_disk struct. libxl then passes
the URL to qemu for cosumption by the rbd backend.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>

The libxl_device_nic structure supports specifying an outgoing rate
limit based on a time interval and bytes allowed per interval. In xl
config a rate limit is specified as "<RATE>/s@<INTERVAL>". INTERVAL
is optional and defaults to 50ms.

libvirt expresses outgoing limits by average (required), peak, burst,
and floor attributes in units of KB/s. This patch supports the outgoing
bandwidth limit by converting the average KB/s to bytes per interval
based on the same default interval (50ms) used by xl.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Finalize the refactor by adding the 'virDomainDefGetVCpusMax' getter and
reusing it accross libvirt.

Since the strtok_r call in libxlCapsInitGuests expects a non NULL first
parameter when the third parameter is NULL, we need to check that
the returned 'capabilities' from a libxl_get_version_info call is
not NULL and error out if so since the code expects it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

libxl/libxl_conf.c: In function 'libxlDriverConfigNew':
libxl/libxl_conf.c:1560:30: error: 'log_level' may be used uninitialized
in this function [-Werror=maybe-uninitialized]

Instead of a hardcoded DEBUG log level, use the overall
daemon log level specified in libvirtd.conf when opening
a log stream with libxl. libxl is very verbose when DEBUG
log level is set, resulting in huge log files that can
potentially fill a disk. Control of libxl verbosity should
be placed in the administrator's hands.

Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.htmlSigned-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com>

libxl recently gained support for QXL video device.  Support
it in the libxl driver too.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>

For HVM domains, vfb info must be populated in the libxl_domain_build_info
struct.  Currently this is done in the libxlMakeVfbList function, but IMO
it would be cleaner to populate the build_info vfb in a separate
libxlMakeBuildInfoVfb function.  libxlMakeVfbList would then handle only
vfb devices, simiar to the other libxlMake<device>List functions.

A future patch will extend libxlMakeBuildInfoVfb to support SPICE.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

While implementing support for SPICE, I noticed VNC passwd was
never copied to libxl_device_vfb's vnc.passwd field.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The xend driver and the parsing/formating code in src/xenconfig
have long supported soundhw.  Add support in the libxl driver too.

Provide integration with libvirt's lock manager in the libxl driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit bf32462b missed initializing sdl.opengl.  Without the
initialization, libvirtd will be terminated by an assert from libxl:

Assertion `!libxl_defbool_is_default(db)' failed.
Reported-by: NOlaf Hering <olaf@aepfle.de>

If the domU configu has sdl enabled libvirtd crashes:
libvirtd[5158]: libvirtd: libxl.c:343: libxl_defbool_val:
Assertion `!libxl_defbool_is_default(db)' failed.

Initialize the relevant defbool variables in libxl_device_vfb.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Cc: Jim Fehlig <jfehlig@suse.com>

Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Rather than an opencoded string. This should be a no-op

Add support for HVM direct kernel boot in libxl.  Also add a
test to verify domXML <-> native conversions.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

xen.git commit babeca32 added a pkgconfig file for libxenlight,
allowing libxl apps to determine the location of Xen binaries
such as firmware blobs, device emulator, etc.

This patch adds support for xenlight.pc in the libxl driver, falling
back to the previous configure logic if not found.  It introduces
LIBXL_FIRMWARE_DIR and LIBXL_EXECBIN_DIR to define the firmware and
libexec_bin locations.  If xenlight.pc does not exist, the defines
are set to the current hardcoded paths.  The capabilities'
<emulator> and <loader> elements are updated to use the paths.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit 4ab8cd77 added a check requiring input devices to have
a bus type of VIR_DOMAIN_INPUT_BUS_USB, failing to start the
domain otherwise.  But virDomainDefParseXML adds implicit mouse
and keyboard if a graphics device is configured.  See calls to
virDomainDefMaybeAddInput.

The regression is fixed by removing the check requiring USB input
devices, and skipping non-USB input devices when populating USB
'usbdevice' in libxl_domain_build_info struct.

As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

This implement handling of <backenddomain name=''/>  parameter introduced
in previous patch.

Works on Xen >= 4.3, because only there libxl supports setting backend
domain by name.  Specifying backend domain by ID or UUID is currently not
supported.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

When initializing a libxl_domain_build_info struct with
libxl_domain_build_info_init(), VNC is enabled by default.  As a
result, VMs configured with no graphics still have VNC enabled.
This behavior is a regression wrt to the legacy Xen driver.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Do not silently ignore its value. LibXL support only one address, so
refuse multiple IPs.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

On error, libxlMakeDomBuildInfo() frees the caller-provided
libxl_domain_build_info struct embedded in libxl_domain_config,
causing a segfault

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f9c13020700 (LWP 40988)]
(gdb) bt
0  0x00007f9c162f95b4 in free () from /lib64/libc.so.6
1  0x00007f9c0d0965ad in libxl_bitmap_dispose () from
   /usr/lib64/libxenlight.so.4.4
2  0x00007f9c0d0a73bf in libxl_domain_build_info_dispose ()
   from /usr/lib64/libxenlight.so.4.4
3  0x00007f9c0d0a7974 in libxl_domain_config_dispose () from
   /usr/lib64/libxenlight.so.4.4
4  0x00007f9c0d2e00c5 in libxlDomainStart (driver=0x7f9c0400e4e0,
   vm=0x7f9c0412b0d0, start_paused=false, restore_fd=-1) at
   libxl/libxl_domain.c:1323
5  0x00007f9c0d2e1d4b in libxlDomainCreateXML (conn=0x7f9c000009a0,...)
   at libxl/libxl_driver.c:660

Remove the call to libxl_domain_build_info_dispose() from
libxlMakeDomBuildInfo().  On error, callers will dispose the
libxl_domain_config object, which in turn disposes the build info.

With the introduction of the libxlDomainGetEmulatorType function,
it is trivial to support a user-specfied <emulator> in the libxl
driver.  This patch is based loosely on David Scott's old patch
to do the same

https://www.redhat.com/archives/libvir-list/2013-April/msg02119.htmlSigned-off-by: NJim Fehlig <jfehlig@suse.com>

This started as an investigation into an issue where libvirt (using the
libxl driver) and the Xen host, like an old couple, could not agree on
who is responsible for selecting the VNC port to use.

Things usually (and a bit surprisingly) did work because, just like that
old couple, they had the same idea on what to do by default. However it
was possible that this ended up in a big argument.

The problem is that display information exists in two different places:
in the vfbs list and in the build info. And for launching the device model,
only the latter is used. But that never gets initialized from libvirt. So
Xen allows the device model to select a default port while libvirt thinks
it has told Xen that this is done by libvirt (though the vfbs config).

While fixing that, I made a stab at actually evaluating the configuration
of the video device. So that it is now possible to at least decide between
a Cirrus or standard VGA emulation and to modify the VRAM within certain
limits using libvirt.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

This patch introduces a function to detect whether the specified
emulator is QEMU_XEN or QEMU_XEN_TRADITIONAL.  Detection is based on the
string "Options specific to the Xen version:" in '$qemu -help' output.
AFAIK, the only qemu containing that string in help output is the
old Xen fork (aka qemu-dm).

Note:
QEMU_XEN means a qemu that contains support for Xen.

QEMU_XEN_TRADITIONAL means Xen's old forked qemu 0.10.2
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

Commit 4dfc34c3 missed copying the user-specified keymap to
libxl_domain_build_info struct when creating a VFB device.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The libxl driver was blindly assigning libvirt's
virDomainLifecycleAction to libxl's libxl_action_on_shutdown, when
in fact the various actions take on different values in these enums.

Introduce helpers to properly map the enum values.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on code related to xen.

* src/libxl/libxl_conf.c (libxlCapsInitGuests)
(libxlMakeDomBuildInfo): Correct use of {}.
* src/xen/xen_hypervisor.c (virXen_getvcpusinfo)
(xenHypervisorMakeCapabilitiesInternal): Likewise.
* src/xen/xend_internal.c (xenDaemonOpen)
(xenDaemonDomainMigratePerform, xend_detect_config_version)
(xenDaemonDetachDeviceFlags, xenDaemonDomainMigratePerform)
(xenDaemonDomainBlockPeek): Likewise.
* src/xenapi/xenapi_driver.c (xenapiConnectListDomains)
(xenapiDomainLookupByUUID, xenapiDomainGetOSType): Likewise.
* src/xenconfig/xen_common.c (xenParseCPUFeatures, xenFormatNet):
Likewise.
* src/xenconfig/xen_sxpr.c (xenParseSxpr, xenFormatSxprNet)
(xenFormatSxpr): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit b55cc5f4 did a shallow copy of libxl_{sdl,vnc}_info from the
domain config to the build info, which resulted in double-freeing
strings contained in the structures during cleanup, which later
resulted in a libvirtd crash.  Fix by performing a deep copy of the
structure, VIR_STRDUP'ing embedded strings instead of simply copying
their pointers.

Fixes the following issue reported on the libvirt dev list

https://www.redhat.com/archives/libvir-list/2014-August/msg01112.html