Convert these test cases to use DO_TEST_CAPS_LATEST

* os-firmware-bios
* os-firmware-efi
* os-firmware-efi-secboot
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Convert these test cases to use DO_TEST_CAPS_LATEST

* virtio-transitional
* virtio-non-transitional
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1693066

Up until memfd introduction (in 24b74d18) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.

This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Some test cases are only executed using WHEN_INACTIVE, and the
output file name should reflect this for clarity.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

disk-mirror-old has different output file for the active and
inactive parts, which should be named accordingly; on the other
hand, both output files for disk-backing-chains-noindex are
identical, so it makes sense to only keep around one and remove
the (in-)active suffix.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add <controller type='scsi' model handling for virtio transitional
devices. Ex:

  <controller type='scsi' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"

The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add controller type='virtio-serial' model handling for virtio
transitional devices. Ex:

  <controller type='virtio-serial' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-serial-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add <input> model handling for virtio transitional devices. Ex:

  <input type='passthrough' bus='virtio' model='virtio-transitional'>
    ...
  </input>

* "virtio-transitional" maps to qemu "virtio-input-host-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-input-host-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add <vsock> model handling for virtio transitional devices. Ex:

  <vsock model='virtio-transitional'>
    ...
  </vsock>

* "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add new <memballoon> model values for virtio transitional devices. Ex:

  <memballoon model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add <filesystem> model handling for virtio transitional devices. Ex:

  <filesystem type='mount' model='virtio-transitional'>
    ...
  </filesystem

* "virtio-transitional" maps to qemu "virtio-9p-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-9p-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:

- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add new <rng> model values for virtio transitional devices. Ex:

  <rng model='virtio-transitional'>
    ...
  </rng>

* "virtio-transitional" maps to qemu "virtio-rng-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add <hostdev> protocol=vhost model handling for virtio transitional
devices. Ex:

  <hostdev mode='subsystem' type='scsi_host' model='virtio-transitional'>
    <source protocol='vhost' wwpn=X/>
  </hostdev>

* "virtio-transitional" maps to qemu "vhost-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-scsi-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

qemu vhost-scsi devices map to XML roughly like:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn=X/>
    </hostdev>

To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.

Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add new <interface> model handling for virtio transitional devices. Ex:

<interface>
  <model type='virtio-transitional'/>
</interface>

* "virtio-transitional" maps to qemu "virtio-net-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':

* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.

Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty

Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable

Forbid configurations where users would attempt to use cdroms in virtio
bus.

Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

As we support multiple scsi controllers there's no need to have a
special test for this controller.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

As we support multiple scsi controllers there's no need to have a
special test for this controller.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

As we support multiple scsi controllers there's no need to have a
special test for this controller.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Drop the 'device' suffix which is quite pointless.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

We don't need separate files for this test. Also modernize it in the
process.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add a file to aggregate testing for 'virtio-scsi' based on the modern
framework.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.

Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>