conf: Add <hostdev model='virtio-{non-}transitional'/>

qemu vhost-scsi devices map to XML roughly like:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn=X/>
    </hostdev>

To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.

Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

docs/formatdomain.html.in

@@ -4730,7 +4730,12 @@
           <dd><span class="since">since 2.5.0</span>For SCSI devices, user
             is responsible to make sure the device is not used by host. This
             <code>type</code> passes all LUNs presented by a single HBA to
-            the guest.
+            the guest. <span class="since">Since 5.2.0,</span> the
+            <code>model</code> attribute can be specified further
+            with "virtio-transitional", "virtio-non-transitional", or
+            "virtio". See
+            <a href="#elementsVirtioTransitional">Virtio transitional devices</a>
+            for more details.
           </dd>
           <dt><code>mdev</code></dt>
           <dd>For mediated devices (<span class="since">Since 3.2.0</span>)

docs/schemas/domaincommon.rng

@@ -4630,6 +4630,15 @@
     <attribute name="type">
       <value>scsi_host</value>
     </attribute>
+    <optional>
+      <attribute name="model">
+        <choice>
+          <value>virtio</value>
+          <value>virtio-transitional</value>
+          <value>virtio-non-transitional</value>
+        </choice>
+      </attribute>
+    </optional>
     <element name="source">
       <choice>
         <group>

src/conf/domain_conf.c

@@ -786,6 +786,14 @@ VIR_ENUM_IMPL(virDomainHostdevSubsysSCSIHostProtocol,
               "vhost",
 );
 
+VIR_ENUM_IMPL(virDomainHostdevSubsysSCSIVHostModel,
+              VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_LAST,
+              "default",
+              "virtio",
+              "virtio-transitional",
+              "virtio-non-transitional",
+);
+
 VIR_ENUM_IMPL(virDomainHostdevCaps, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_LAST,
               "storage",
               "misc",
@@ -7781,6 +7789,7 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
     int backend;
     virDomainHostdevSubsysPCIPtr pcisrc = &def->source.subsys.u.pci;
     virDomainHostdevSubsysSCSIPtr scsisrc = &def->source.subsys.u.scsi;
+    virDomainHostdevSubsysSCSIVHostPtr scsihostsrc = &def->source.subsys.u.scsi_host;
     virDomainHostdevSubsysMediatedDevPtr mdevsrc = &def->source.subsys.u.mdev;
     VIR_AUTOFREE(char *) managed = NULL;
     VIR_AUTOFREE(char *) sgio = NULL;
@@ -7869,14 +7878,26 @@ virDomainHostdevDefParseXMLSubsys(xmlNodePtr node,
         }
     }
 
-    if (def->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV) {
+    if (def->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV &&
+        def->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) {
         if (model) {
-            virReportError(VIR_ERR_XML_ERROR, "%s",
+            virReportError(VIR_ERR_XML_ERROR,
                            _("'model' attribute in <hostdev> is only supported "
-                             "when type='mdev'"));
+                             "when type='%s'"),
+                           virDomainHostdevSubsysTypeToString(def->source.subsys.type));
             return -1;
         }
-    } else {
+    }
+
+    if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) {
+        if (model &&
+            ((scsihostsrc->model = virDomainHostdevSubsysSCSIVHostModelTypeFromString(model)) < 0)) {
+            virReportError(VIR_ERR_XML_ERROR,
+                           _("unknown hostdev model '%s'"),
+                           model);
+            return -1;
+        }
+    } else if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV) {
         if (!model) {
             virReportError(VIR_ERR_XML_ERROR, "%s",
                            _("Missing 'model' attribute in mediated device's "
@@ -26810,6 +26831,7 @@ virDomainHostdevDefFormat(virBufferPtr buf,
     const char *mode = virDomainHostdevModeTypeToString(def->mode);
     virDomainHostdevSubsysSCSIPtr scsisrc = &def->source.subsys.u.scsi;
     virDomainHostdevSubsysMediatedDevPtr mdevsrc = &def->source.subsys.u.mdev;
+    virDomainHostdevSubsysSCSIVHostPtr scsihostsrc = &def->source.subsys.u.scsi_host;
     const char *type;
 
     if (!mode) {
@@ -26860,6 +26882,12 @@ virDomainHostdevDefFormat(virBufferPtr buf,
                               virTristateBoolTypeToString(scsisrc->rawio));
         }
 
+        if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST &&
+            scsihostsrc->model) {
+            virBufferAsprintf(buf, " model='%s'",
+                              virDomainHostdevSubsysSCSIVHostModelTypeToString(scsihostsrc->model));
+        }
+
         if (def->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_MDEV) {
             virBufferAsprintf(buf, " model='%s'",
                               virMediatedDeviceModelTypeToString(mdevsrc->model));

src/conf/domain_conf.h

@@ -394,11 +394,23 @@ typedef enum {
 
 VIR_ENUM_DECL(virDomainHostdevSubsysSCSIHostProtocol);
 
+typedef enum {
+    VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_DEFAULT,
+    VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO,
+    VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_TRANSITIONAL,
+    VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_VIRTIO_NON_TRANSITIONAL,
+
+    VIR_DOMAIN_HOSTDEV_SUBSYS_SCSI_VHOST_MODEL_TYPE_LAST,
+} virDomainHostdevSubsysSCSIVHostModelType;
+
+VIR_ENUM_DECL(virDomainHostdevSubsysSCSIVHostModel);
+
 typedef struct _virDomainHostdevSubsysSCSIVHost virDomainHostdevSubsysSCSIVHost;
 typedef virDomainHostdevSubsysSCSIVHost *virDomainHostdevSubsysSCSIVHostPtr;
 struct _virDomainHostdevSubsysSCSIVHost {
     int protocol; /* enum virDomainHostdevSubsysSCSIHostProtocolType */
     char *wwpn;
+    int model; /* enum virDomainHostdevSubsysSCSIVHostModelType */
 };
 
 typedef struct _virDomainHostdevSubsys virDomainHostdevSubsys;

src/libvirt_private.syms

@@ -407,6 +407,8 @@ virDomainHostdevInsert;
 virDomainHostdevModeTypeToString;
 virDomainHostdevRemove;
 virDomainHostdevSubsysPCIBackendTypeToString;
+virDomainHostdevSubsysSCSIVHostModelTypeFromString;
+virDomainHostdevSubsysSCSIVHostModelTypeToString;
 virDomainHostdevSubsysTypeToString;
 virDomainHPTResizingTypeToString;
 virDomainHubTypeFromString;

tests/qemuxml2argvdata/virtio-non-transitional.x86_64-3.1.0.args

@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
 addr=0x1 \
 -device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
 -device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
+-device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
 -device virtio-blk-pci,disable-legacy=on,disable-modern=off,scsi=off,bus=pci.2,\
 addr=0x0,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
 -netdev user,id=hostnet0 \
 -device virtio-net-pci,disable-legacy=on,disable-modern=off,netdev=hostnet0,\
 id=net0,mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on

tests/qemuxml2argvdata/virtio-non-transitional.x86_64-latest.args

@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
 addr=0x1 \
 -device pcie-root-port,port=0x9,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x1 \
 -device pcie-root-port,port=0xa,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x2 \
+-device pcie-root-port,port=0xb,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x3 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
 -device virtio-blk-pci-non-transitional,scsi=off,bus=pci.2,addr=0x0,\
 drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
 -netdev user,id=hostnet0 \
 -device virtio-net-pci-non-transitional,netdev=hostnet0,id=net0,\
 mac=00:11:22:33:44:55,bus=pci.1,addr=0x0 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on

tests/qemuxml2argvdata/virtio-non-transitional.xml

@@ -15,6 +15,9 @@
       <mac address='00:11:22:33:44:55'/>
       <model type='virtio-non-transitional'/>
     </interface>
+    <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-non-transitional'>
+      <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+    </hostdev>
     <controller type='usb' model='none'/>
     <memballoon model='none'/>
   </devices>

tests/qemuxml2argvdata/virtio-transitional.x86_64-3.1.0.args

@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
 addr=0x1 \
 -device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
 -device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
+-device pcie-root-port,port=0xa,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x2 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
 -device virtio-blk-pci,disable-legacy=off,disable-modern=off,scsi=off,\
 bus=pci.2,addr=0x2,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
 -netdev user,id=hostnet0 \
 -device virtio-net-pci,disable-legacy=off,disable-modern=off,netdev=hostnet0,\
 id=net0,mac=00:11:22:33:44:55,bus=pci.2,addr=0x1 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on

tests/qemuxml2argvdata/virtio-transitional.x86_64-latest.args

@@ -27,12 +27,15 @@ file=/tmp/lib/domain--1-QEMUGuest1/master-key.aes \
 addr=0x1 \
 -device pcie-pci-bridge,id=pci.2,bus=pci.1,addr=0x0 \
 -device pcie-root-port,port=0x9,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x1 \
+-device pcie-root-port,port=0xa,chassis=4,id=pci.4,bus=pcie.0,addr=0x1.0x2 \
 -drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk0 \
 -device virtio-blk-pci-transitional,scsi=off,bus=pci.2,addr=0x2,\
 drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
 -netdev user,id=hostnet0 \
 -device virtio-net-pci-transitional,netdev=hostnet0,id=net0,\
 mac=00:11:22:33:44:55,bus=pci.2,addr=0x1 \
+-device vhost-scsi-pci,wwpn=naa.5123456789abcde0,vhostfd=3,id=hostdev0,\
+bus=pci.3,addr=0x0 \
 -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,\
 resourcecontrol=deny \
 -msg timestamp=on

tests/qemuxml2argvdata/virtio-transitional.xml

@@ -15,6 +15,9 @@
       <mac address='00:11:22:33:44:55'/>
       <model type='virtio-transitional'/>
     </interface>
+    <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-transitional'>
+      <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+    </hostdev>
     <controller type='usb' model='none'/>
     <memballoon model='none'/>
   </devices>

tests/qemuxml2xmloutdata/virtio-non-transitional.xml

@@ -40,6 +40,11 @@
       <target chassis='3' port='0xa'/>
       <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
     </controller>
+    <controller type='pci' index='4' model='pcie-root-port'>
+      <model name='pcie-root-port'/>
+      <target chassis='4' port='0xb'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x3'/>
+    </controller>
     <interface type='user'>
       <mac address='00:11:22:33:44:55'/>
       <model type='virtio-non-transitional'/>
@@ -47,6 +52,10 @@
     </interface>
     <input type='mouse' bus='ps2'/>
     <input type='keyboard' bus='ps2'/>
+    <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-non-transitional'>
+      <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
+    </hostdev>
     <memballoon model='none'/>
   </devices>
 </domain>

tests/qemuxml2xmloutdata/virtio-transitional.xml

@@ -39,6 +39,11 @@
       <target chassis='3' port='0x9'/>
       <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
     </controller>
+    <controller type='pci' index='4' model='pcie-root-port'>
+      <model name='pcie-root-port'/>
+      <target chassis='4' port='0xa'/>
+      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
+    </controller>
     <interface type='user'>
       <mac address='00:11:22:33:44:55'/>
       <model type='virtio-transitional'/>
@@ -46,6 +51,10 @@
     </interface>
     <input type='mouse' bus='ps2'/>
     <input type='keyboard' bus='ps2'/>
+    <hostdev mode='subsystem' type='scsi_host' managed='no' model='virtio-transitional'>
+      <source protocol='vhost' wwpn='naa.5123456789abcde0'/>
+      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
+    </hostdev>
     <memballoon model='none'/>
   </devices>
 </domain>