* Allow devices without parent links to be created and set their parent to the root "computer" node

* The udev driver didn't properly free resources that it allocates when setting up the 'computer' device in the error case.

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

All other uses of get_str_prop in this file that ignored
failure explicitly cast to void.

* src/node_device/node_device_hal.c (dev_create): Silence coverity
warning.

* src/node_device/node_device_udev.c (udevEnumerateDevices): Remove
unnecessary call to udev_list_entry_get_name.

* src/node_device/node_device_linux_sysfs.c(get_virtual_functions_linux):
Return "ret", rather than always returning 0.

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match

It was used for error reporting only.

The original udev node device backend neglected to lock the driverState
struct containing the device list when adding and removing devices
* src/node_device/node_device_udev.c: add necessary locks in
  udevRemoveOneDevice() and udevAddOneDevice()

udevGetUintProperty was called with base set to 0 for busnum and devnum.
With base 0 strtoul parses the number as octal if it start with a 0. But
busnum and devnum are decimal and udev returns them padded with leading
zeros. So strtoul parses them as octal. This works for certain decimal
values like 001-007, but fails for values like 008.

Change udevProcessUSBDevice to use base 10 for busnum and devnum.

it causes a NULL-dereference on some systems like Solaris 10.
* src/node_device/node_device_linux_sysfs.c. Include <stdlib.h>.
(get_sriov_function): Use canonicalize_file_name, not realpath.
* bootstrap (modules): Add canonicalize-lgpl.

This fixes a segfault when the event handler is called after shutdown
when the global driver state is NULL again.

Also fix a locking issue in an error path.

Two files were using functions from <sys/stat.h> but not including
in. Most of the time they got this automatically via another header,
but certain build flag combinations can reveal the problem

* src/lxc/lxc_container.c, src/node_device/node_device_linux_sysfs.c:
  Add <sys/stat.h>

* src/node_device/node_device_linux_sysfs.c: open_wwn_file() the
  VIR_ERROR resllay should be just a VIR_DEBUG

* src/node_device/node_device_udev.c: udevSetupSystemDev() only print the
  error message if lookup failed in both DMI_DEVPATH and DMI_DEVPATH_FALLBACK

* src/node_device/node_device_linux_sysfs.c (get_virtual_functions_linux):
Remove unnecessary closedir.  Spotted by Dave Allan.

* src/node_device/node_device_linux_sysfs.c(get_virtual_functions_linux):
Don't leak a DIR buffer and file descriptor on error path.

I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
    VIR_DEBUG
    VIR_DEBUG0
    VIR_ERROR
    VIR_ERROR0
    VIR_INFO
    VIR_WARN
    VIR_WARN0
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We are setting the same property two different ways without
free'ing in between. Just drop the second assignment.

There are quite a few differences between how udev exposes legacy
and USB floppy devs, but this patch takes care of both variants.

udev doesn't prefix USB product/vendor info with '0x', so the
strtol conversions were wrong for the product field (vendor already
set the correct base). Make the change for PCI product/vendor as
well to be safe.

This fixes USB device assignment via virt-manager.

older kernels such as 2.6.26 have it there.

This invalid free results in heap corruption. Some symptoms I saw
because of this were libvirtd crashing and virt-manager hanging
while trying to enumerate devices.

* src/node_device/node_device_driver.c (update_driver_name): The
previous code would write one byte beyond the end of the 4KiB
stack buffer when presented with a symlink value of exactly that
length (very unlikely).  Remove the automatic buffer and use
virFileResolveLink in place of readlink.  Suggested by Daniel Veillard.

src/node_device/node_device_udev.c was using a function available only
on the daemon code, fix this and use the function available globally

* src/node_device/node_device_udev.c: replace use of virEventAddHandleImpl
  by virEventAddHandle

Provides the CDROM label for current media. Only implemented for the
udev backend.

exposes the relationships between physical
and virtual functions on SR IOV capable devices.

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

Fix crash on strdup in that case.

I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs"  Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.

* src/conf/node_device_conf.c src/conf/node_device_conf.h
  src/node_device/node_device_driver.c src/node_device/node_device_hal.c
  src/node_device/node_device_udev.c: remove devicePath from the
  structure and use def->sysfs_path instead

* src/node_device/node_device_driver.c: two places where not calling
  virReportOOMError after strdup failure

The HAL driver returns a fatal error code in the case where HAL
is not running. This causes the entire libvirtd daemon to quit
which isn't desirable. Instead it should simply disable the HAL
driver

* src/node_device/node_device_hal.c: Quietly disable HAL if it is
  not running

There is a race condition in HAL driver startup where the callback
can get triggered before we have finished startup. This then causes
a deadlock in the driver.

* src/node_device/node_device_hal.c: RElease driver lock before
  registering DBus callbacks

uses libpciaccess to provide human readable names for PCI vendor and
device IDs
* configure.in: add a requirement for libpciaccess >= 0.10.0
* src/Makefile.am: add the associated compilation flags and link
* src/node_device/node_device_udev.c: lookup the libpciaccess for
  vendor name and product name based on their ids

* configure.in src/Makefile.am: remove the configuration check and
  build instructions
* src/node_device/node_device_devkit.c: removed the module
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  removed references to the old backend

* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific
  support for SCSI target in node device capabilities
* src/node_device/node_device_udev.c: add some extra detection code
  when handling udev output

* configure.in: add new --with-udev, disabled by default, and requiring
  libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
  the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
  to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
  of fields in node device definitions, and an API to look them up,
  remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
  files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
  virBuildPath and virBuildPathInternal() function