Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.

While iterating with virDomainObjListForEach it is safe to remove
current element. But while iterating, 'doms' lock is already taken, so
can't use standard virDomainObjListRemove. So introduce
virDomainObjListRemoveLocked for this purpose.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Ensure that all APIs which list storage objects filter
them against the access control system.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that all APIs which list node device objects filter
them against the access control system.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that all APIs which list network objects filter
them against the access control system.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

iptablesContext holds only 4 pairs of iptables
(table, chain) and there's no need to pass
it around.

This is a first step towards separating bridge_driver.c
in platform-specific parts.

Any device which belongs to an "IOMMU group" (used by vfio) will
have links to all devices of its group listed in
/sys/bus/pci/$device/iommu_group/devices;
/sys/bus/pci/$device/iommu_group is actually a link to
/sys/kernel/iommu_groups/$n, where $n is the group number (there
will be a corresponding device node at /dev/vfio/$n once the
devices are bound to the vfio-pci driver)

The following functions are added:

virPCIDeviceGetIOMMUGroupList

  Gets a virPCIDeviceList with one virPCIDeviceList for each device
  in the same IOMMU group as the provided virPCIDevice (a copy of the
  original device object is included in the list.

virPCIDeviceAddressIOMMUGroupIterate

  Calls the function @actor once for each device in the group that
  contains the given virPCIDeviceAddress.

virPCIDeviceAddressGetIOMMUGroupAddresses

  Fills in a virPCIDeviceAddressPtr * with an array of
  virPCIDeviceAddress, one for each device in the iommu group of the
  provided virPCIDeviceAddress (including a copy of the original).

virPCIDeviceAddressGetIOMMUGroupNum

  Returns the group number as an int (a valid group number will always
  be 0 or greater).  If there is no iommu_group link in the device's
  directory (usually indicating that vfio isn't loaded), -2 will be
  returned. On any real error, -1 will be returned.

Make a copy of the device and add the copy to the
list. (virPCIDeviceListAdd() adds the original object to the list
instead).

This function has utility outside of virpci.c, so make it public.

Also the name didn't fit convention, so change it to
virPCIDeviceAddressParse.

I realized after the fact that it's probably better in the long run to
give this function a name that matches the name of the link used in
sysfs to hold the group (iommu_group).

I'm changing it now because I'm about to add several more functions
that deal with iommu groups.

This patch implements extensible variants of all internal migration APIs
used for v3 migration.

All APIs that take typed parameters are only using params address in
their entry point debug messages. With the new VIR_TYPED_PARAMS_DEBUG
macro, all functions can easily log all individual typed parameters
passed to them.

This API is useful for checking whether only a specific subset of
supported typed parameters were passed.

* virPCIDeviceFindByIDs - find a device on a list w/o creating an object
    This makes searching for an existing device on a list lighter weight.

* virPCIDeviceCopy - make a copy of an existing virPCIDevice object.

* virPCIDeviceGetDriverPathAndName - construct new strings containing
    1) the name of the driver bound to this device.
    2) the full path to the sysfs config for that driver.
    (This code was lifted from virPCIDeviceUnbindFromStub, and replaced
    there with a call to this new function).

Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch introduces the virAccessManagerPtr class as the
interface between virtualization drivers and the access
control drivers. The viraccessperm.h file defines the
various permissions that will be used for each type of object
libvirt manages
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add <features> and <compat> elements to volume target XML.

<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.

<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.

This method is useful not only in virnetdev.c.

Call virLogVMessage instead of virLogMessage, since libudev
called us with a va_list object, not a list of arguments.

Honor message priority and strip the trailing newline.

https://bugzilla.redhat.com/show_bug.cgi?id=969152

https://bugzilla.redhat.com/show_bug.cgi?id=973543

This internal API checks, if passed address is a wildcard address.

We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.

But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

 -vnc :5900,share=allow-exclusive
allows clients to ask for exclusive access which is
implemented by dropping other connections Connecting
multiple clients in parallel requires all clients asking
for a shared session (vncviewer: -shared switch)

 -vnc :5900,share=force-shared
disables exclusive client access.  Useful for shared
desktop sessions, where you don't want someone forgetting
specify -shared disconnect everybody else.

 -vnc :5900,share=ignore
completely ignores the shared flag and allows everybody
connect unconditionally

Introduce use of a virDomainDefPtr in the domain lookup
APIs to simplify introduction of ACL security checks.
The virDomainPtr cannot be safely used, since the app
may have supplied mis-matching name/uuid/id fields. eg
the name points to domain X, while the uuid points to
domain Y. Resolving the virDomainPtr to a virDomainDefPtr
ensures a consistent name/uuid/id set.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

E.g.

% sg_map
/dev/sg0  /dev/sda
/dev/sg1  /dev/sr0

What the helper gets for /dev/sg0 is /dev/sda, it will be used by
later patch.

QEMU introduced "discard" option for drive since commit a9384aff53,

<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem.  Some machine types
may not support discard requests.
</...>

This patch exposes the support in libvirt.

QEMU supported "discard" for "-drive" since v1.5.0-rc0:

% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1

So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.

In an upcoming patch, I need the way to safely transfer a nested
virJSON object out of its parent container for independent use,
even after the parent is freed.

* src/util/virjson.h (virJSONValueObjectRemoveKey): New function.
(_virJSONObject, _virJSONArray): Use correct type.
* src/util/virjson.c (virJSONValueObjectRemoveKey): Implement it.
* src/libvirt_private.syms (virjson.h): Export it.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

network: static route support for <network>

This patch adds the <route> subelement of <network> to define a static
route.  the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".

These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:

  ip route add <address>/<prefix> via <gateway> \
               dev <virbr-bridge> proto static metric <metric>

Tests are done to validate that the input data are correct.  For
example, for a static route ip definition, the address must be a
network address and not a host address.  Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).

prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.

Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:

    RTNETLINK answers: File exists

This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future).  Caution should be
used when manipulating route metrics, especially for a default route.

Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better.  But,
that is being left as an exercise for another day.
Signed-off-by: NGene Czarcinski <gene@czarc.net>
Signed-off-by: NLaine Stump <laine@laine.org>

Add a virFileNBDDeviceAssociate method, which given a filename
will setup a NBD device, using qemu-nbd as the server.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds util functions for scsi hostdev.
Signed-off-by: NHan Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: NOsier Yang <jyang@redhat.com>

Currently the fdstream function hardcodes the location
of the iohelper to LIBEXECDIR "/libvirt_iohelper". This
is not convenient when trying to write test cases which
use this code. Add a virFDStreamSetIOHelper method to
allow the test cases to point to the location of the
un-installed iohelper binary.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

These all existed before virfile.c was created, and for some reason
weren't moved.

This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.

This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.

Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.

It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

There are various methods named "virXXXXSecurityContext",
which are specific to SELinux. Rename them all to
"virXXXXSELinuxContext". They will still raise errors at
runtime if SELinux is not compiled in
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The code adaptation is not done right now, but in subsequent patches.
Hence I am not implementing syntax-check rule as it would break
compilation. Developers are strongly advised to use these new macros.
They are similar to VIR_ALLOC() logic: VIR_STRDUP(dst, src) returns zero
on success, -1 otherwise. In case you don't want to report OOM error,
use the _QUIET variant of a macro.

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

This will be used on a tap file descriptor returned by the bridge helper
to populate the <target> element, because the helper does not provide
the interface name.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>