'make distcheck' was failing with:
make[3]: Entering directory `/home/eblake/libvirt-tmp2/libvirt-1.1.1/_build/docs'
perl ../../docs/genaclperms.pl ../../src/access/viraccessperm.h > ../../docs/aclperms.htmlinc
/bin/sh: ../../docs/aclperms.htmlinc: Permission denied

when simulating the case of a user doing a VPATH build from a
read-only source tree.  The culprit?  BUILT_SOURCES are _always_
built, and so must NOT be built into srcdir and need not be part
of the tarball.  On the other hand, shipped files must never
depend on files in the builddir.  While it would be possible to
fix the problem by generating aclperms.htmlinc into builddir,
we then have the problem that we ship acl.html - we'd have to
rejigger a lot of things to not ship pre-built html.  So this
patch goes the other direction - we don't need BUILT_SOURCES,
but instead ensure that we have proper dependencies so that
all files in srcdir are up-to-date at the time the tarball is
created.  And because we ship html files in the tarball, that
implies we don't expect users to be able to rebuild them, so
we must not clean any files that would trigger a rebuild except
under the maintainer rules.

* docs/Makefile.am (BUILT_SOURCES): Delete.
(CLEANFILES): Downgrade aclperms.htmlinc cleanup...
(maintainer-clean-local): ...and move hvsupport.html.in...
(MAINTAINERCLEANFILES): ...to a maintainer action.
(hvsupport.html.in): Write into srcdir.
(hvsupport.html): Ensure files are built in order.
(aclperms.htmlinc): Honor silent make.
(EXTRA_DIST): Ship aclperms.htmlinc.
Signed-off-by: NEric Blake <eblake@redhat.com>

With the 1.1.1 tarball, if a user does 'make && make distcheck',
things pass, but if they do 'make distcheck' after 'make clean',
there is an odd failure:

  GEN      ../../docs/devhelp/index.html
I/O error : Permission denied
I/O error : Permission denied
runtime error: file ../../docs/devhelp/devhelp.xsl line 43 element document
xsltDocumentElem: unable to save to ../../docs/devhelp/libvirt-virterror.html
I/O error : Permission denied
I/O error : Permission denied

This implies that the rules for 'make dist' are missing a
dependency - the generated documentation needs to be up-to-date
before creating the tarball, or else the tarball will be missing
files, where the end user will end up trying to rebuild files in
srcdir, and that fails when srcdir is read-only.

1.1.1 plus this patch now works without issues (other issues have
crept in to 1.1.2-rc1 that prevent 'make distcheck' from working,
but those will be cleaned up in later patches).

* docs/Makefile.am (dist-local): New dependency.
Signed-off-by: NEric Blake <eblake@redhat.com>

This adds two new pages to the website, acl.html describing
the general access control framework and permissions models,
and aclpolkit.html describing the use of polkit as an
access control driver.

page.xsl is modified to support a new syntax

  <div id="include" filename="somefile.htmlinc"/>

which will cause the XSL transform to replace that <div>
with the contents of 'somefile.htmlinc'. We use this in
the acl.html.in file, to pull the table of permissions
for each libvirt object. This table is autogenerated
from the enums in src/access/viraccessperms.h by the
genaclperms.pl script.

newapi.xsl is modified so that the list of permissions
checks shown against each API will link to the description
of the permissions in acl.html
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Makefiles are another easy file to enforce line limits.

Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression

* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Several files called out COPYING or COPYING.LIB instead of using
the normal boilerplate.  It's especially important that we don't
call out COPYING from an LGPL file, since COPYING is traditionally
used for the GPL.  A few files were lacking copyright altogether.

* src/rpc/gendispatch.pl: Add missing copyright.
* Makefile.nonreentrant: Likewise.
* src/check-symfile.pl: Likewise.
* src/check-symsorting.pl: Likewise.
* src/driver.h: Likewise.
* src/internal.h: Likewise.
* tools/libvirt-guests.sh.in: Likewise.
* tools/virt-pki-validate.in: Mention copyright in comment, not just code.
* tools/virt-sanlock-cleanup.in: Likewise.
* src/rpc/genprotocol.pl: Spell out license terms.
* src/xen/xend_internal.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* Makefile.am: Likewise.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* docs/schemas/Makefile.am: Likewise.
* examples/apparmor/Makefile.am: Likewise.
* examples/domain-events/events-c/Makefile.am: Likewise.
* examples/dominfo/Makefile.am: Likewise.
* examples/domsuspend/Makefile.am: Likewise.
* examples/hellolibvirt/Makefile.am: Likewise.
* examples/openauth/Makefile.am: Likewise.
* examples/python/Makefile.am: Likewise.
* examples/systemtap/Makefile.am: Likewise.
* examples/xml/nwfilter/Makefile.am: Likewise.
* gnulib/lib/Makefile.am: Likewise.
* gnulib/tests/Makefile.am: Likewise.
* include/Makefile.am: Likewise.
* include/libvirt/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
* configure.ac: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

If no todo.cfg is present, make sure the stub is in HTML5
format and clearly states that the config was not available
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The rule generating the HTML docs passing the --html flag
to xsltproc. This makes it use the legacy HTML parser, which
either ignores or tries to fix all sorts of broken XML tags.
There's no reason why we should be writing broken XML in
the first place, so removing --html and adding the XHTML
doctype to all files forces us to create good XML.

This adds the XHTML doc type and fixes many, many XML tag
problems it exposes.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is just a bare Easter Egg. Whenever a user runs virDomainScreenshot
over a domain in test driver, he'll get the Libvirt PNG logo in return.

Added missing entries to makefile and spec.
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We were just installing them in the top level html directory, which
broke navigation and overwrote other pages.

https://bugzilla.redhat.com/show_bug.cgi?id=837825

On a machine without xsltproc, the build failed with:

Scripting search.php
/usr/local/bin/bash: line 1: search.php.tmp: No such file or directory
rm: ./search.php: No such file or directory

Regression introduced in commit 28183590.

* docs/Makefile.am (%.php): Skip in the same conditions when the
.tmp file is skipped.

This patch makes search.php autogenerated from search.php.in, thus
removing hardcoded menus, footer etc. and the search.php is added to
.gitignore.

There is new rule added for *.php files (to make it bit less
hardcoded) that takes *.php.code.in and injects it inside the
generated *.php (xslt was not happy about php code in the source xml).

We had a distributed file (remote_protocol.h, which in turn was
a prereq to remote_driver.c) depending on a generated file
(libvirt_probes.h), which is a no-no for a VPATH build from a
read-only source tree (no wonder 'make distcheck' tests precisely
that situation):

     File `libvirt_driver_remote.la' does not exist.
       File `libvirt_driver_remote_la-remote_driver.lo' does not exist.
             Prerequisite `libvirt_probes.h' is newer than target `../../src/remote/remote_protocol.h'.
            Must remake target `../../src/remote/remote_protocol.h'.
Invoking recipe from Makefile:7464 to update target `../../src/remote/remote_protocol.h'.
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/libvirt-0.9.12/_build/src'
  GEN    ../../src/remote/remote_protocol.h
cannot create ../../src/remote/remote_protocol.h: Permission denied at ../../src/rpc/genprotocol.pl line 31.
make[3]: *** [../../src/remote/remote_protocol.h] Error 13

Rather than making distributed .c files depend on generated files, we
really want to ensure that compilation into .lo files is not attempted
until the generated files are present, done by this patch.  Since there
were two different sets of conditionally generated files that both
feed the .lo file, I had to introduce a new variable REMOTE_DRIVER_PREREQS
to keep automake happy.

After that fix, the next issue was that make treats './foo' and 'foo'
differently in determining whether an implicit %foo rule is applicable,
with the result that locking/qemu-sanlock.conf wasn't properly being
built at the right times.  Also, the output for using the .aug test
files was a bit verbose.

After fixing the src directory, the next error is related to the docs
directory, where the tarball is missing a stamp file and thus tries to
regenerate files that are already present:

  GEN    ../../docs/apibuild.py.stamp
Traceback (most recent call last):
  File "../../docs/apibuild.py", line 2511, in <module>
    rebuild("libvirt")
  File "../../docs/apibuild.py", line 2495, in rebuild
    builder.serialize()
  File "../../docs/apibuild.py", line 2424, in serialize
    output = open(filename, "w")
IOError: [Errno 13] Permission denied: '../../docs/libvirt-api.xml'
make[5]: *** [../../docs/apibuild.py.stamp] Error 1

and fixing that exposed another case of a distributed file (generated
html) depending on a built file (libvirt.h), but only when doing an
in-tree build, because of a file glob.

* src/Makefile.am ($(srcdir)/remote/remote_driver.c): Change...
(libvirt_driver_remote_la-remote_driver.lo): ...to the real
dependency.
($(builddir)/locking/%-sanlock.conf): Drop $(builddir), so that
rule gets run in time for test_libvirt_sanlock.aug.
(test_libvir*.aug): Cater to silent build.
(conf_DATA): Don't ship qemu-sanlock.conf in the tarball, since it
is trivial to regenerate.
* docs/Makefile.am (EXTRA_DIST): Ship our stamp file.
($(APIBUILD_STAMP)): Don't depend on generated file.

Ever since commit c964b6aa, make was trying to find the timestamp
of '""./apibuild.py".stamp"', but only touching 'apibuild.py.stamp',
and thus always rebuilding.  Reported by Daniel P. Berrange.

* docs/Makefile.am (APIBUILD, APIBUILD_STAMP): Omit bogus quotes.

Use a witness file approach like we do for python/generator.py,
as suggested by Eric. Fixes the build issue reported here:

https://www.redhat.com/archives/libvir-list/2012-April/msg01435.htmlSigned-off-by: NCole Robinson <crobinso@redhat.com>

Every now & then, with parallel builds, we get a failure to
validate hvsupport.html.in.  I eventually noticed that this
is because we get 2 instances of the generator running at
once.

We already list hvsupport.html.in in BUILT_SOURCES but this
was not working. It turns out the flaw is that we were
adding deps to the 'all:' target instead of the 'all-am:'
target. BUILT_SOURCES is a dep of 'all', so any custom
targets written in Makefile.am must use 'all-am:' so that
they don't get run until BUILT_SOURCES are completely
generated

* docs/Makefile.am: s/all/all-am/

Language bindings may well want to use the libvirt-api.xml and
libvirt-qemu-api.xml files to either auto-generate themselves,
or sanity check the manually written bindings for completeness.
Currently these XML files are not installed as standard, merely
ending up as a %doc file in the RPM.

This changes them to be installed into $prefix/share/libvirt/apis/
The *-refs.xml files are not installed, since those are only
useful during generation of the online API doc files.

The pkg-config file is enhanced so that you can query the install
location of the API files. eg

  # pkg-config --variable=libvirt_qemu_api libvirt
  /home/berrange/builder/i686-pc-mingw32/sys-root/mingw/share/libvirt/libvirt-qemu-api.xml

* docs/Makefile.am: Install libvirt-api.xml & libvirt-qemu-api.xml
* libvirt.pc.in: Add vars for querying API install location
* libvirt.spec.in, mingw32-libvirt.spec.in: Include API XML files

This adds a page documenting many aspects of migration:

 - The types of migration (managed direct, p2p, unmanaged direct)
 - Data transports (native, tunnelled)
 - Migration URIs
 - Config file handling
 - Example scenarios

* libvirt.css: Rules for data tables and diagrams
* Makefile.am: Include extra png/fig files
* migration-managed-direct.fig, migration-managed-direct.png,
  migration-managed-direct.png, migration-managed-p2p.png,
  migration-native.fig, migration-native.png,
  migration-tunnel.fig, migration-tunnel.png,
  migration-unmanaged-direct.fig, migration-unmanaged-direct.png:
  Diagrams of migration
* migration.html.in, sitemap.html.in: New migration doc

This was breaking "make dist"

I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.

Commit 8665f855 introduced a slight regression in doc generation,
since make only quits a rule on the first failed command ending
with a newline rather than a semicolon.

* docs/Makefile.am (html/index.html): Don't use xmllint unless
xsltproc succeeded.
* .gitignore: Ignore recently updated stamp file name.

The current API build scripts will continue and exit with a zero
status even if they find problems. This has been the cause of many
build problems, or hidden build errors, in the past. Change the
scripts so they always exit with a non-zero status for any problems
they do not understand. Also turn off all debug output by default
so they respect $(AM_V_GEN)

* docs/Makefile.am: Use $(AM_V_GEN) for API/HTML scripts
* docs/apibuild.py, python/generator.py: Exit with non-zero status
  if problems are found. Also be silent, not outputting any debug
  messages.
* src/Makefile.am: Use $(AM_V_GEN) for ESX generator
* python/Makefile.am: Tweak rule

Without this patch, the make rule in a VPATH build was trying to
invoke ../../docs/../../docs/todo.pl, which didn't exist.

* docs/Makefile.am (todo.html.in): Using $< already implies
$(srcdir) in GNU make VPATH situations.

This fixes the problem of not finding python in /usr/bin
which broke build on FreeBSD

Partial revert of commit c3c30d4d.

* docs/Makefile.am (internals/%.html.tmp): Restore MKDIR_P; it is
needed for intermediate file after all.
Reported by Daniel P. Berrange.

I noticed this while building from libvirt.git on RHEL 5.6:

Generating internals/command.html.tmp
mkdir: cannot create directory `/internals': Permission denied

If I had been building as root instead, this pollutes /.

Older autoconf lacks $(builddir), but it is rigorously equal to '.'
in newer autoconf, so we could use '$(MKDIR_P) internals' instead.

However, since internals/command.html is part of the tarball, we
_already_ build it in $(srcdir), not $(builddir) during VPATH
builds, so the mkdir is wasted effort!

* docs/Makefile.am (internals/%.html.tmp): Drop unused mkdir.

New APIs have to use long long instead of long.

Also make apibuild errors fatal.

In a parallel make, HTML validation tries to run before
hvsupport.html.in has been built.

* docs/Makefile.am: List hvsupport.html.in as a built source

The hvsupport.html.in file is forever out of date. By annotating
the driver struct tables in each driver with version information,
we can auto-generate the hvsupport.html.in file. Annotating the
drivers will be mandatory for new patches, ensuring hvsupport.html.in
is never out of date again.

* docs/hvsupport.html.in: Delete
* hvsupport.pl: Script to generate hvsupport.html.in
* Makefile.am: Autogenerate hvsupport.html.in

A diff of 'make dist' from in-tree vs. a VPATH build showed
that we were missing docs/api_extension/*.patch files, but
shipping other files that we didn't need.

* bootstrap.conf (gnulib_extra_files): Don't distribute files we
don't care about.
* docs/Makefile.am (patches): Perform wildcard correctly.

XSLT allows for two ways of generating the output of transformation.
Either implicit, which xsltproc prints to stdout and can be redirected
to a file using -o file. Or explicit, which means the stylesheet
contains <xsl:document> element which specifies where the output should
be saved. This can be used for generating more files by a single run of
xsltproc and -o directory/ can change the directory where the output
files will be stored.

devhelp.xsl is special in that it combines both options in one
stylesheet, which doesn't work well with -o:

xsltproc --nonet -o ./devhelp/ ./devhelp/devhelp.xsl ./libvirt-api.xml

Outputs 4 *.html files into ./devhelp but then tries to write to
./devhelp/ as a file (hence the I/O error) rather than writing output to
the fifth file devhelp/libvirt.devhelp.

This patch modifies devhelp.xsl so that all files are generated using
<xsl:document> element and -o directory/ can be used to override output
directory where those files are saved.

This still doesn't fix {html,devhelp}/libvirt-{libvirt-virterror}.html,
but it's progress in the right direction.

* docs/Makefile.am (%.html): Build into srcdir.

Even VPATH make dist succeeds now

Libxml2-Logo-90x34.gif was removed from the repository in Sep 2009
(commit d6d528ca) because our docs no longer reference it.

* docs/Makefile.am (install-data-local): Don't install missing file.