https://bugzilla.redhat.com/show_bug.cgi?id=1497396

The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Similarly to previous patch, for some types of interface domain
and host are on the same side of RX/TX barrier. In that case, we
need to set up the QoS differently. Well, swapped.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1497410

The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This code compiles only on Linux. Therefore the condition we
check is always true.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1439991

Whenever a device is being updated via
virDomainUpdateDeviceFlags() API, we parse the device XML and
ideally run some generic checks to validate the configuration
(e.g. if device defines per-device boot order but the domain has
os/boot element already). Well, that's the theory - due to a
missing check we've jumped early from that check function.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Funny thing. So when initializing LXC driver's capabilities,
firstly the virLXCDriverGetCapabilities() is called. This creates
new capabilities, stores them under driver->caps, ref() them and
return them. However, the return value is ignored. Secondly, the
function is called yet again and since we have driver->caps set,
they are ref()-ed again an returned. So in the end, driver's
capabilities have refcount of three when in fact they should have
refcount of one.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Security impls of this function already raise errors, don't
overwrite them.

   For attaching hosdev, we should set dev->data.hostdev
   rather than dev->data.disk
Signed-off-by: NChen Hanxiao <chenhanxiao@gmail.com>

If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning.  If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:

    Program terminated with signal 6, Aborted.
    #0  0x00007fc45cba15d7 in raise
    #1  0x00007fc45cba2cc8 in abort
    #2  0x00007fc45cbe12f7 in __libc_message
    #3  0x00007fc45cbe86d3 in _int_free
    #4  0x00007fc45d8d292c in PyDict_Fini
    #5  0x00007fc45d94f46a in Py_Finalize
    #6  0x00007fc45d960735 in Py_Main
    #7  0x00007fc45cb8daf5 in __libc_start_main
    #8  0x0000000000400721 in _start

The double dereference of 'pyobj_cbData' is triggered in the following way:

    (1) libvirt_virConnectDomainEventRegisterAny is invoked.
    (2) the event is successfully added to the event callback list
        (virDomainEventStateRegisterClient in
        remoteConnectDomainEventRegisterAny returns 1 which means ok).
    (3) when function remoteConnectDomainEventRegisterAny is hit,
        network connection disconnected coincidently (or libvirtd is
        restarted) in the context of function 'call' then the connection
        is lost and the function 'call' failed, the branch
        virObjectEventStateDeregisterID is therefore taken.
    (4) 'pyobj_conn' is dereferenced the 1st time in
        libvirt_virConnectDomainEventFreeFunc.
    (5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
         2nd time in libvirt_virConnectDomainEventRegisterAny.
    (6) the double free error is triggered.

Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.

Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.

So far our code is full of the following pattern:

  dom = virGetDomain(conn, name, uuid)
  if (dom)
      dom->id = 42;

There is no reasong why it couldn't be just:

  dom = virGetDomain(conn, name, uuid, id);

After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

That file has only two exported files and each one of them has
different naming.  virNode is what all the other files use, so let's
use it.  It wasn't used before because the clash with public API
naming, so let's fix that by shortening the name (there is no other
private variant of it anyway).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities.  Hence moving
the code to src/conf/ is the right way to go.

Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split.  And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Other drivers (like qemu) would like to know if the namespaces
are available therefore it makes sense to move this function to
a shared module.

At the same time, this function had some default namespaces that
are checked with every call. It is not necessary - let callers
pass just those namespaces they are interested in.

With the move the function is renamed to
virProcessNamespaceAvailable.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is just a code move of virstat.c to virnetdevtap.c

In preparation to the code move to virnetdevtap.c, this change:

* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
  method in virnetdevtap.c.
* Add the attributes checker

New line character in name of domain is now forbidden because it
mess virsh output and can be confusing for users.
Validation of name is done in drivers, after parsing XML to avoid
problems with dissappeared domains which was already created with
new-line char in name.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When user tries to resume already running domain (Qemu or LXC)
VIR_ERR_OPERATION_INVALID error should be raised with message that
domain is already running.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1009008

Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.

This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This way we get reference counting and we can get rid of locking
function.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In the latest glibc, major() and minor() functions are marked as
deprecated (glibc commit dbab6577):

  CC       util/libvirt_util_la-vircgroup.lo
util/vircgroup.c: In function 'virCgroupGetBlockDevString':
util/vircgroup.c:768:5: error: '__major_from_sys_types' is deprecated:
  In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
  For historical compatibility, it is currently defined by
  <sys/types.h> as well, but we plan to remove this soon.
  To use `major', include <sys/sysmacros.h> directly.
  If you did not intend to use a system-defined macro `major',
  you should #undef it after including <sys/types.h>.
  [-Werror=deprecated-declarations]
     if (virAsprintf(&ret, "%d:%d ", major(sb.st_rdev), minor(sb.st_rdev)) < 0)
     ^~
In file included from /usr/include/features.h:397:0,
                 from /usr/include/bits/libc-header-start.h:33,
                 from /usr/include/stdio.h:28,
                 from ../gnulib/lib/stdio.h:43,
                 from util/vircgroup.c:26:
/usr/include/sys/sysmacros.h:87:1: note: declared here
 __SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
 ^

Moreover, in the glibc commit, there's suggestion to keep
ordering of including of header files as implemented here.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1363773

Imagine that you're creating a transient domain, but for some reason,
starting it fails. That is virLXCProcessStart() returns an error. With
current code, in the error handling code the domain object is removed
from the domain object list, @vm is set to NULL and controls jump to
enjob label where virLXCDomainObjEndJob() is called which dereference vm
leading to instant crash.

The fix is to end the job in the error handling code and only after that
remove the domain from the list and jump onto cleanup label instead of
endjob.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So commit 306b3a85 tried mimicking behaviour of commit 540c339a, but
added a virObjectRef(vm) only after virDomainObjListAdd() in
lxcDomainDefineXMLFlags() and not in lxcDomainCreateXMLWithFiles().
That way undefining a domain that was started with different XML than
defined will leave the domain object in a state with not enough
references to then remove it.  Hence any lxcDomainDestroyFlags() called
afterwards crashes the daemon.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1351057Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Few arguments of the function are not necessary any more which leads to
some cleanups. The 'uri' argument had a stray ATTRIBUTE_UNUSED.

The impls are identical and I don't have a reasonable idea where to
extract it.

This also kills yet another use of virDomainLiveConfigHelperMethod.

Move all APIs with a virHostMEM name prefix out into new
util/virhostmem.h & util/virhostmem.c files
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.

This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.

For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace all the repetitive code by using
virDomainGetBlkioParametersAssignFromDef, similar to what commit 9f50f6e2
did in the qemu driver.

Remove yet another usage of virDomainLiveConfigHelperMethod
along with an sa_assert that helped clang understand the code flow.