- 28 3月, 2011 1 次提交
-
-
由 Osier Yang 提交于
Which will lead "./configure --with-audit=yes" breaks.
-
- 25 3月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* configure.ac: Use xenlight: rather than libxenlight: in summary. Suggested by Daniel Veillard.
-
- 19 3月, 2011 1 次提交
-
-
由 Jim Fehlig 提交于
The libxenlight driver does not build against the tech preview version of libxenlight in Xen 4.0. Only enable building the driver against more complete libxenlight found in Xen 4.1.
-
- 18 3月, 2011 1 次提交
-
-
由 Jim Fehlig 提交于
Add a new xen driver based on libxenlight [1], which is the primary toolstack starting with Xen 4.1.0. The driver is stateful and runs privileged only. Like the existing xen-unified driver, the libxenlight driver is accessed with xen:// URI. Driver selection is based on the status of xend. If xend is running, the libxenlight driver will not load and xen:// connections are handled by xen-unified. If xend is not running *and* the libxenlight driver is available, xen:// connections are deferred to the libxenlight driver. V6: - Address several code style issues noted by Daniel Veillard - Make drive work with xen:/// URI - Hold domain object reference while domain is injected in libvirt event loop. Race found and fixed by Markus Groß. V5: - Ensure events are unregistered when domain private data is destroyed. Discovered and fixed by Markus Groß. V4: - Handle restart of libvirtd, reconnecting to previously started domains - Rebased to current master - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0) V3: - Reserve vnc port within driver when autoport=yes V2: - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81) - Rebased to current master - Plug memory leaks found by Stefano Stabellini and valgrind - Handle SHUTDOWN_crash domain death event [1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
-
- 15 3月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
* configure.ac: Check for geteuid() * src/util/util.h: Compat for geteuid()
-
- 28 2月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The kill() function doesn't exist on Win32, so it needs to be checked for at build time & code disabled in cgroups * configure.ac: Check for kill() * src/util/cgroup.c: Stub out virCGroupKill* functions when kill() isn't available
-
- 22 2月, 2011 1 次提交
-
-
由 Wen Congyang 提交于
Currently, we need virIsDevMapperDevice() when we build libvirt with disk or mpath storage drivers. So we should check device-mapper-devel when we build with disk storage driver but without mpath storage driver.
-
- 19 2月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Two regressions: Commit df1011ca broke builds for systems that lack devmapper (non-Linux, as well as Linux with ./autogen.sh --without-libvirtd and without the libraries present). Commit ce6fd650 broke cross-compilation, due to a gnulib bug. * .gnulib: Update to latest, for cross-compilation fix. * src/util/util.c (virIsDevMapperDevice): Provide stub for platforms not using storage driver. * configure.ac (devmapper): Arrange to define HAVE_LIBDEVMAPPER_H. devmapper issue reported by Wen Congyang.
-
由 Eric Blake 提交于
* configure.ac (gl_ASSERT_NO_GNULIB_POSIXCHECK): Use to reduce time spent in configure.
-
- 17 2月, 2011 2 次提交
-
-
由 Osier Yang 提交于
The name convention of device mapper disk is different, and 'parted' can't be used to delete a device mapper disk partition. e.g. Name Path ----------------------------------------- 3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 Error: Expecting a partition number. This patch introduces 'dmsetup' to fix it. Changes: - New function "virIsDevMapperDevice" in "src/utils/utils.c" - remove "is_dm_device" in "src/storage/parthelper.c", use "virIsDevMapperDevice" instead. - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in" - Check "dmsetup" in 'configure.ac' for "with-storage-disk" - Changes on "src/Makefile.am" to link against libdevmapper - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms" Changes from v1 to v3: - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g - replace "virRun" with "virCommand" - sort the list of util functions in "libvirt_private.syms" - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration. e.g. Name Path ----------------------------------------- 3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted Name Path -----------------------------------------
-
由 Daniel Veillard 提交于
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs * po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
-
- 16 2月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
Make with_packager and with_packager_version default to "no". This way --without-packager-version (as shorthand for --with-packager(-version)=no) works correctly too. Prior to this patch libvirt outputs a line like this when --with-packager(-version) was not specified # ./daemon/libvirtd 14:11:15.018: 31796: info : libvirt version: 0.8.8, package: () Now the unspecified parts are correctly omitted. Reported by Osier Yang.
-
- 11 2月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The logging functions are enhanced so that immediately prior to the first log message being printed to any output channel, the libvirt package version will be printed. eg $ LIBVIRT_DEBUG=1 virsh 18:13:28.013: 17536: info : libvirt version: 0.8.7 18:13:28.013: 17536: debug : virInitialize:361 : register drivers ... The 'configure' script gains two new arguments which can be used as --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10" --with-packager-version="1.fc14" to allow distros to append a custom string with package specific data. The RPM specfile is modified so that it appends the RPM version, the build host, the build date and the packager name. eg $ LIBVIRT_DEBUG=1 virsh 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10) 18:14:52.086: 17551: debug : virInitialize:361 : register drivers Thus when distro packagers receive bug reports they can clearly see what version was in use, even if the bug reporter mistakenly or intentionally lies about version/builds * src/util/logging.c: Output version data prior to first log message * libvirt.spec.in: Include RPM release, date, hostname & packager * configure.ac: Add --with-packager & --with-packager-version args
-
- 02 2月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* configure.ac (PARTED_FOUND): Issue configure error if --with-storage-disk=yes but no parted is found.
-
- 19 1月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* .gnulib: Update to latest, for sigpipe and sigaction modules. * bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r. * tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that gnulib guarantees it. (SA_SIGINFO): Define for mingw fallback. * src/util/virterror.c (virStrerror): Simplify, now that gnulib guarantees the POSIX interface. * configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check. (AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
-
- 08 1月, 2011 1 次提交
-
-
由 Guido Günther 提交于
and keep it enabled by default. This allows downstreams to turn it off via: ./configure --disable-maintainer-mode as discussed in https://www.redhat.com/archives/virt-tools-list/2010-October/msg00049.html
-
- 04 1月, 2011 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add documentation * po/*po*: regenerate po and pot files
-
- 24 12月, 2010 5 次提交
-
-
由 Laine Stump 提交于
virSetUIDGID() sets both the real and effective group and user of the process, and additionally calls initgroups() to assure that the process joins all the auxiliary groups that the given uid is a member of.
-
由 Laine Stump 提交于
Running an instance of the router advertisement daemon (radvd) allows guests using the virtual network to automatically acquire an IPv6 address and default route. Note that acquiring an address only works for networks with a prefix length of exactly 64 - radvd is still run in other circumstances, and still advertises routes, but autoconf will not work because it requires exactly 64 bits of address info from the network prefix. This patch avoids a race condition with the pidfile by manually daemonizing radvd rather than allowing it to daemonize itself, then creating our own pidfile (in addition to radvd's own file, which is unnecessary, but there is no way to tell radvd to not create it). This is accomplished by exec'ing it with "--debug 1" in the commandline, and using virCommand's features to fork, create a pidfile, and detach from the newly forked process.
-
由 Laine Stump 提交于
All of the iptables functions eventually call down to a single bottom-level function, and fortunately, ip6tables syntax (for all the args that we use) is identical to iptables format (except the addresses), so all we need to do is: 1) Get an address family down to the lowest level function in each case, either implied through an address, or explicitly when no address is in the parameter list, and 2) At the lowest level, just decide whether to call "iptables" or "ip6tables" based on the family. The location of the ip6tables binary is determined at build time by autoconf. If a particular target system happens to not have ip6tables installed, any attempts to run it will generate an error, but that won't happen unless someone tries to define an IPv6 address for a network. This is identical behavior to IPv4 addresses and iptables.
-
由 Laine Stump 提交于
brSetInetAddress can only set a single IP address on the bridge, and uses a method (ioctl(SIOCSETIFADDR)) that only works for IPv4. Replace it and brSetInetNetmask with a single function that uses the external "ip addr add" command to add an address/prefix to the interface - this supports IPv6, and allows adding multiple addresses to the interface. Although it isn't currently used in the code, we also add a brDelInetAddress for completeness' sake. Also, while we're modifying bridge.c, we change brSetForwardDelay and brSetEnableSTP to use the new virCommand API rather than the deprecated virRun, and also log an error message in bridge_driver.c if either of those fail (previously the failure would be completely silent).
-
由 Wen Congyang 提交于
When I run configure, I receive some syntax error. ..... checking where to find <rpc/rpc.h>... none checking for library containing dlopen... -ldl /configure: line 52500: test: =: unary operator expected /configure: line 52766: test: =: unary operator expected checking linux/kvm.h usability... yes checking linux/kvm.h presence... yes ..... Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
-
- 22 12月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Now the VMware driver doesn't depend on the ESX driver anymore. Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE. Also add a libvirt_vmx.syms file. Move some escaping functions from esx_util.c to vmx.c. Adapt the test suite, ESX and VMware driver to the new code layout.
-
- 21 12月, 2010 3 次提交
-
-
由 Eric Blake 提交于
* configure.ac (dlopen): Cygwin dlopen is in libc; avoid spurious failure. (XDR_CFLAGS): Define when needed. * src/Makefile.am (libvirt_driver_remote_la_CFLAGS): Use it.
-
由 Eric Blake 提交于
* configure.ac (with_selinux): Check for <selinux/label.h>. * src/security/security_selinux.c (getContext): New function. (SELinuxRestoreSecurityFileLabel): Use it to restore compilation when using older libselinux.
-
由 Eric Blake 提交于
Autoconf 2.59 doesn't define ${localedir}, so libvirt was failing to compile due to a missing LOCALEDIR until today's configmake fix. * .gnulib: Update to latest for configmake fix. * configure.ac (libpcap): Avoid AS_CASE.
-
- 18 12月, 2010 3 次提交
-
-
由 Matthias Bolte 提交于
Don't require dlopen, but link to ole32 and oleaut32 on Windows. Don't expose g_pVBoxFuncs anymore. It was only used to get the version of the API. Make VBoxCGlueInit return the version instead. This simplifies the implementation of the MSCOM glue layer. Get the VirtualBox version from the registry. Add a dummy implementation of the nsIEventQueue to the MSCOM glue as there seems to be no direct equivalent with MSCOM. It might be implemented using the normal window message loop. This requires additional investigation.
-
由 Jean-Baptiste Rouault 提交于
-
由 Eric Blake 提交于
* tests/Makefile.am (EXTRA_DIST): Sort, and add directories. (SUBDIRS): Drop automake recursion into subdirs. * tests/commanddata/Makefile.am: Delete. * tests/confdata/Makefile.am: Likewise. * tests/sexpr2xmldata/Makefile.am: Likewise. * tests/xencapsdata/Makefile.am: Likewise. * tests/xmconfigdata/Makefile.am: Likewise. * tests/xml2sexprdata/Makefile.am: Likewise.
-
- 14 12月, 2010 2 次提交
-
-
由 Diego Elio Pettenò 提交于
-
由 Diego Elio Pettenò 提交于
Without this fix, ./configure --with-libpcap will cause --with-libpcap=yes to be implicitly passed down, which cause yes/bin/pcap-config to be searched for rather than /usr/bin/pcap-config. Also output pcap: no when pcap is not found or disabled.
-
- 10 12月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* tests/Makefile.am (SUBDIRS): Add commanddata. * tests/commandtest.c (checkoutput): Delete correct file. (test4): Delete pid file. (mymain): Delete unused variable. * tests/commanddata/Makefile.am: New file. * configure.ac (AC_OUTPUT): Build new makefile. Reported by Dominik Klein.
-
- 08 12月, 2010 1 次提交
-
-
由 Justin Clift 提交于
This fixes a misleading error message saying the libnl package needs to be installed, when it's really the libnl-devel package needing to be installed.
-
- 01 12月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
- configure.ac libvirt.spec.in: bump version, add a missing systemtap build requirement - docs/news.html.in: add informations about the release - po/*: updated Polish and Dutch localizations, and regenerated - tests/qemuxml2argvtest.c: Fix build problem
-
- 23 11月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow messages from different threads to be untangled, include an integer thread identifier in log messages. * src/util/logging.c: Include thread ID * src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c: Add new virThreadSelfID() function * configure.ac: Check for sys/syscall.h
-
- 15 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
This is the case on FreeBSD.
-
- 13 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
This also fixes configure problems on FreeBSD, as test doesn't understand '==' there.
-
- 12 11月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To avoid the need for duplicating implementations of virStream drivers, provide a generic implementation that can handle any FD based stream. This code is copied from the existing impl in the QEMU driver, with the locking moved into the stream impl, and addition of a read callback The FD stream code will refuse to operate on regular files or block devices, since those can't report EAGAIN properly when they would block on I/O * include/libvirt/virterror.h, include/libvirt/virterror.h: Add VIR_FROM_STREAM error domain * src/qemu/qemu_driver.c: Remove code obsoleted by the new generic streams driver. * src/fdstream.h, src/fdstream.c, src/fdstream.c, src/libvirt_private.syms: Generic reusable FD based streams
-
- 09 11月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
Suggested by danpb, as it's not up-to-date anymore and lacks many functions that were added to libvirtd.
-
- 29 10月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
* configure.ac libvirt.spec.in: new version * docs/news.html.in: update news page and improve format * po/*.po*: Update po again
-