The machine cgroup is a superset, a parent to the emulator and vcpuX
cgroups. The parent cgroup should never have any tasks directly in it.
In fact the parent cpuset might contain way more cpus than the sum of
emulatorpin and vcpupins. So putting tasks in the superset will allow
them to run outside of <cputune>.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

virCgroupNewMachine used to add the pidleader to the newly created
machine cgroup. Do not do this implicit anymore.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Use the proper data structures for the iteration since ncpupids will be
made private later.

Instead of directly accessing the array add a helper to do this.

Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.

We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d82
and 65686e5a this was removed.

Since commit 0c04906f the check for priv->cgroup doesn't make sense as
the calls to virCgroupHasController return the same information. Remove
it and move it's comment partially to the new check.

The already spurious check was also later copied to the iothreads code.

https://bugzilla.redhat.com/show_bug.cgi?id=1231114

We do not have a pointer to the device here, just its source.

The domain definition is not needed in any of these functions.
Only pass it to qemuSetupChardevCgroup, which is used as a callback
for virDomainChrDefForeach.

Use the right type for passing virDomainObjPtr instead of
void* where possible.

Change CGroup to Cgroup to match other functions in the file.

If there are no IOThreads defined, no sense making other checks

Every single call to qemuDomainEventQueue() uses the following pattern:

    if (event)
        qemuDomainEventQueue(driver, event);

Let's move the check for valid event to qemuDomainEventQueue and
simplify all callers.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The problem here is that there are some values that kernel accepts, but
does not set them, for example 18446744073709551615 which acts the same
way as zero.  Let's do the same thing we do with other tuning options
and re-read them right after they are set in order to keep our internal
structures up-to-date.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165580Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

If cpuset is disabled or not available, it libvirt must not use it.
Mainly for actions that do not need it and can use sched_setaffinity()
or numa_membind() instead, because they will fail without good reason.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1244664Signed-off-by: NLuyao Huang <lhuang@redhat.com>

The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.

This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.

The error is exposed by the following log entry:

debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'

for a "/machine/test" resource and "testvm" vm.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570

The privileged flag will not change while the configuration might
change. Make the 'privileged' flag member of the driver again and mark
it immutable. Should that ever change add an accessor that will group
reads of the state.

Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.

As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.

So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.

For better viewing of this patch use '-w'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.

Adjust the test output because our printing goes in order of the iothreadids
list now.

Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.

Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.

Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id

Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.

The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).

Use the custom emulator pin setting with the highest priority same as
with vcpupin.

Replace the virCgroupNew{Vcpu|Emulator|IOThread} calls with the common
virCgroupNewThread API
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

 131,088 bytes in 16 blocks are definitely lost in loss record 2,174 of 2,176
    at 0x4C29BFD: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
    by 0x4C2BACB: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
    by 0x52A026F: virReallocN (viralloc.c:245)
    by 0x52BFCB5: saferead_lim (virfile.c:1268)
    by 0x52C00EF: virFileReadLimFD (virfile.c:1328)
    by 0x52C019A: virFileReadAll (virfile.c:1351)
    by 0x52A5D4F: virCgroupGetValueStr (vircgroup.c:763)
    by 0x1DDA0DA3: qemuRestoreCgroupState (qemu_cgroup.c:805)
    by 0x1DDA0DA3: qemuConnectCgroup (qemu_cgroup.c:857)
    by 0x1DDB7BA1: qemuProcessReconnect (qemu_process.c:3694)
    by 0x52FD171: virThreadHelper (virthread.c:206)
    by 0x82B8DF4: start_thread (pthread_create.c:308)
    by 0x85C31AC: clone (clone.S:113)
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015==    at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015==    by 0x5302FD1: virObjectNew (virobject.c:193)
==19015==    by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015==    by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015==    by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015==    by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015==    by 0x53201AD: virThreadHelper (virthread.c:206)
==19015==    by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015==    by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

==19015== 1,064 (656 direct, 408 indirect) bytes in 2 blocks are definitely lost in loss record 1,002 of 1,049
==19015==    at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015==    by 0x52AD74B: virAlloc (viralloc.c:144)
==19015==    by 0x52B47CA: virCgroupNew (vircgroup.c:1057)
==19015==    by 0x52B53E5: virCgroupNewVcpu (vircgroup.c:1451)
==19015==    by 0x1DD85A40: qemuSetupCgroupForVcpu (qemu_cgroup.c:1013)
==19015==    by 0x1DDA66EA: qemuProcessStart (qemu_process.c:4844)
==19015==    by 0x1DDF1807: qemuDomainObjStart (qemu_driver.c:7265)
==19015==    by 0x1DDF1A66: qemuDomainCreateWithFlags (qemu_driver.c:7320)
==19015==    by 0x1DDF1ACD: qemuDomainCreate (qemu_driver.c:7337)
==19015==    by 0x53F87EA: virDomainCreate (libvirt-domain.c:6820)
==19015==    by 0x12690A: remoteDispatchDomainCreate (remote_dispatch.h:3481)
==19015==    by 0x126827: remoteDispatchDomainCreateHelper (remote_dispatch.h:3457)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The function doesn't make sense. There's a simpler way to achieve the
same.

The function doesn't make sense. There's a simpler way to achieve the
same.

The function is used to set cpuset.cpus in various other helpers.

Two places would call to qemuPrepareCpumap() with priv->autoNodeset to
convert it to a cpuset. Remove the function and use the prepared cpuset
automatically.

When the default cpuset or automatic numa placement is used libvirt
would place the whole parent cgroup in the specified cpuset. This then
disallowed to re-pin the vcpus to a different cpu.

This patch pins only the vcpu threads to the default cpuset and thus
allows to re-pin them later.

The following config would fail to start:
<domain type='kvm'>
  ...
  <vcpu placement='static' cpuset='0-1' current='2'>4</vcpu>
  <cputune>
    <vcpupin vcpu='0' cpuset='2-3'/>
    ...

This is a regression since a39f69d2.

Use the default or auto cpuset if they are provided for IOThreads.

The automatic cpuset can be stored along with automatic nodeset and it
does not have to be recreated when used.

We've never set the cpuset.memory_migrate value to anything, keeping it
on default.  However, we allow changing cpuset.mems on live domain.
That setting, however, don't have any consequence on a domain unless
it's going to allocate new memory.

I managed to make 'virsh numatune' move all the memory to any node I
wanted even without disabling libnuma's numa_set_membind(), so this
should be safe to use with it as well.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1198497Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since we're not specifically a vcpu related structure anymore...

As pointed out by jtomko in his review of the IOThreads pinning code:

http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html

there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...

This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...

There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user.  Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED.  Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.

Remove unnecessary function virCompareLimitUlong.  The update of test
is to prevent the 0 to be miss-used as unlimited in future.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The structure will gradually become the only place for NUMA related
config, thus rename it appropriately.

If 'virNumaGetHostNodeset()' fails then the error path will try to free
uninitialized pointer mem_mask. Introduced by commit af2a1f05.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Record the index of each TAP device created and report them to
systemd, so they show up in machinectl status for the VM.

systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.

This falls back to the old CreateMachine method when the new
one is not supported.