Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:

struct remote_typed_param_value {
        int type;
        union {
                int i;
                u_int ui;
                int64_t l;
                uint64_t ul;
                double d;
                int b;
                remote_nonnull_string s;
        } remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;

struct remote_typed_param {
        remote_nonnull_string field;
        remote_typed_param_value value;
};

That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.

The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Since its introduction in 2011 (particularly in commit f4324e32),
the option doesn't work.  It just effectively disables all incoming
connections.  That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive.  Thus, according to the server,
no client supports keepalive.

Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet.  And that won't happen until after we dispatched
the ConnectOpen call.

Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 1882c0bd accidentally used ',' instead of ';'; oddly
enough, the result was still syntactically valid (yes, C is
a fun language).  But it made me do a double take; it's better
to use idiomatic syntax.

* daemon/remote.c (remoteRelayDomainEventDeviceAdded): Fix
harmless typo.
Signed-off-by: NEric Blake <eblake@redhat.com>

Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.

Additionally add a helper that works on non-NULL terminated arrays once
we know the length.

The counterpart to VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED.

https://bugzilla.redhat.com/show_bug.cgi?id=1206114

While it returns info about multiple threads, the version
without the plural is easier to read.

This function only frees the info for one thread.

The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.

Since all APIs are also RPC calls, we automatically get all APIs covered
with thread jobs.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

daemon/remote.c
   * Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses

src/remote/remote_driver.c
   * Define remoteDomainInterfaceAddresses

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
   * Define structs remote_domain_ip_addr, remote_domain_interface,
     remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
   * Introduce upper bounds (to handle DoS attacks):
     REMOTE_DOMAIN_INTERFACE_MAX = 2048
     REMOTE_DOMAIN_IP_ADDR_MAX = 2048
     Restrictions on the maximum number of aliases per interface were
     removed after kernel v2.0, and theoretically, at present, there
     are no upper limits on number of interfaces per virtual machine
     and on the number of IP addresses per interface.

src/remote_protocol-structs
   * New structs added
Signed-off-by: NNehal J Wani <nehaljw.kkd1@gmail.com>

Commit 4f25146b (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129==    at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129==    by 0x5084B8E: virReallocN (viralloc.c:245)
==24129==    by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129==    by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129==    by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129==    by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129==    by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)

In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.

What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients.  Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.

* daemon/remote.c (remoteDispatchConnectListAllDomains)
(remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren)
(remoteDispatchConnectListAllStoragePools)
(remoteDispatchStoragePoolListAllVolumes)
(remoteDispatchConnectListAllNetworks)
(remoteDispatchConnectListAllInterfaces)
(remoteDispatchConnectListAllNodeDevices)
(remoteDispatchConnectListAllNWFilters)
(remoteDispatchConnectListAllSecrets)
(remoteDispatchNetworkGetDHCPLeases): Plug leak.
Signed-off-by: NEric Blake <eblake@redhat.com>

Implement the remote plumbing for virDomainGetIOThreadsInfo
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Add daemon and driver code to (de-)serialize virDomainFSInfo.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.

To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves.  However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Clean up all _virDomainMemoryStat.
Signed-off-by: NJames <james.wangyufei@huawei.com>
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Need to free 'uri_out' on error path.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

In each of these cases, Coverity complains that the result count returned
on error paths would be -1 disregarding that the count and the corresponding
are "linked" together (it doesn't know that).  Simple enough to check and
remove the warning

Implement the remote driver support for shuffling the domain stats
around.

Let's fix this before we bake in a painful API.  Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer.  Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.

* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: NEric Blake <eblake@redhat.com>

Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.

Don't leak the temporary variables on success if NULL is returned
for that field.

Don't dereference NULL on failure to allocate some of the temporaries.

Introduced by commit 990c3b65

Variables/fields named 'interface' clash with system
header symbols on some platforms.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>