Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.

Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:

struct remote_typed_param_value {
        int type;
        union {
                int i;
                u_int ui;
                int64_t l;
                uint64_t ul;
                double d;
                int b;
                remote_nonnull_string s;
        } remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;

struct remote_typed_param {
        remote_nonnull_string field;
        remote_typed_param_value value;
};

That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.

Both admin and remote protocols define their own types
(remote_typed_param vs admin_typed_param). Because of the naming convention,
admin typed params wouldn't be able to reuse the serialization/deserialization
methods, which are tailored for use by remote protocol, even if those method
were exported properly. In that case, introduce a new internal data type
structurally copying both admin and remote protocols which, eventually, would
allow serializer and deserializer to be used in a more generic way.

A pretty nasty deadlock occurs while trying to rename a VM in parallel
with virDomainObjListNumOfDomains.
The short description of the problem is as follows:

Thread #1:

qemuDomainRename:
    ------> aquires domain lock by qemuDomObjFromDomain
       ---------> waits for domain list lock in any of the listed functions:
          - virDomainObjListFindByName
          - virDomainObjListRenameAddNew
          - virDomainObjListRenameRemove

Thread #2:

virDomainObjListNumOfDomains:
    ------> aquires domain list lock
       ---------> waits for domain lock in virDomainObjListCount

Introduce generic virDomainObjListRename function for renaming domains.
It aquires list lock in right order to avoid deadlock. Callback is used
to make driver specific domain updates.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This reverts commit 0e0149ce.

That commit was added to comply with systemd rules that were changed in
the meantime, so this patch is pointless.

Do not store the return value of virDomainParseScaledValue,
it was overwritten anyway.

Delete the cleanup label, there is nothing to clean up.

Free the old vcpupids array in case when this function is called again
during the run of the VM. It will be later reused in the vCPU hotplug
code. The function now returns the number of detected VCPUs.

Future patches will tweak and reuse the function in different places so
move it separately first.

Avoid using virDomainDefSetVcpus when we can set it directly in the
structure.

In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.

Use 'ret' for return variable name, clarify use of 'param_idx' and avoid
unnecessary 'success' label. No functional changes. Also document the
function.

Since commit 71408079 we are generating
socket path later than before -- when starting a domain.  That makes one
particular inconsistent state of a chardev, which was not possible
before, currently valid.  However, SELinux security driver forgot to
guard the main restoring function by a check for NULL-paths.  So make it
no-op for NULL paths, as in the DAC driver.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1300532Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There might be cases, like with typed params, where triggering this check isn't
desirable. But including the whole module in the exception regex is not always
to right way of doing things. By adding an option to manually disable this check
on a specific occurrence, the module itself will still be checked against the
rule.

In case of guest panicked, preserved crashed domain has stopped CPUs.
It's not possible to use tools like WinDbg for the problem investigation
until we start CPUs back.

Error paths after sending the event that domain is started written as if ret = -1
which is set at the beginning of the function. It's common idioma to keep 'ret'
equal to -1 until the end of function where it is set to 0. But here we use ret
to keep result of restore operation too and thus breaks the idioma and its users :)

Let's use different variable to hold restore result.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Rather than a loop reallocating space to build the regex, just allocate
it once up front, then if there's more than 1 nextent, append a comma and
another regex_unit string.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The 'stripes' value is described as the "Number of stripes or mirrors in
a logical volume". So add "mirror" and anything that starts with "raid"
to the list of segtypes that can have an 'nextents' value greater than one.
Use of raid segtypes (raid1, raid4, raid5*, raid6*, and raid10) is favored
over mirror in more recent lvm code.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than preallocating a set number of elements, then walking through
the extents and adjusting the specific element in place, use the APPEND
macros to handle that chore.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In my previous commit a70f3b1c I've tried to fix case
when building from VPATH and a file wasn't being installed.
However, my fix broke non-VPATH build.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:

./test-lib.sh: line 21: realpath: command not found

for every shell script test, because 'realpath' was not part of
coreutils back then.

* tests/test-lib.sh (_scriptdir): Compute with only portable shell.
Signed-off-by: NEric Blake <eblake@redhat.com>

After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.

If neither callback could be registered, there's clearly no need for a
timeout.

If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

If virTimeMillisNow() fails, the SIGINT action must be reset back to
its previous state.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Some lines in this file are misaligned which fires up my OCD.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.

This patch sets the option memory-only also for core dumps created by the
watchdog event.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>

The libvirt-common.h is build time generated file from .in.
Obviously, it's generated into builddir and not srcdir. Problem
is, the list of header files to install, virinc_HEADERS contains
only $(srcdir)/*.h and this misses libvirt-common.h. This problem
is pretty obvious when doing a VPATH build.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Create a helper routine in order to parse any extents information
including the extent size, length, and the device string contained
within the generated 'lvs' output string.

A future patch would then be able to avoid the code more cleanly
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

By opening a RBD volume in Read-Only we do not register a
watcher on the header object inside the Ceph cluster.

Refreshing a volume only calls rbd_stat() which is a operation
which does not write to a RBD image.

This allows us to use a cephx user which has no write
permissions if we would want to use the libvirt storage pool
for informational purposes only.

It also saves us a write into the Ceph cluster which should
speed up refreshing a RBD pool.

rbd_open_read_only() is available in all librbd versions which
also support rbd_open().
Signed-off-by: NWido den Hollander <wido@widodh.nl>

RBD supports cloning by creating a snapshot, protecting it and create
a child image based on that snapshot afterwards.

The RBD storage driver will try to find a snapshot with zero deltas between
the current state of the original volume and the snapshot.

If such a snapshot is found a clone/child image will be created using
the rbd_clone2() function from librbd.

rbd_clone2() is available in librbd since Ceph version Dumpling (0.67) which
dates back to August 2013.

It will use the same features, strip size and stripe count as the parent image.

This implementation will only create a single snapshot on the parent image if
never changes. This reduces the amount of snapshots created for that RBD image
which benefits the performance of the Ceph cluster.

During build the decision will be made to use either rbd_diff_iterate() or
rbd_diff_iterate2().

The latter is faster, but only available on Ceph versions after 0.94 (Hammer).

Cloning is only supported if RBD format 2 is used. All images created by libvirt
are already format 2.

If a RBD format 1 image is used as the original volume the backend will report
a VIR_ERR_OPERATION_UNSUPPORTED error.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Using VIR_STORAGE_VOL_WIPE_ALG_TRIM a RBD volume can be trimmed down
to 0 bytes using rbd_discard()

Effectively all the data on the volume will be lost/gone, but the volume
remains available for use afterwards.

Starting at offset 0 the storage pool will call rbd_discard() in stripe
size * count increments which is usually 4MB. Stripe size being 4MB and
count 1.

rbd_discard() is available since Ceph version Dumpling (0.67) which dates
back to August 2013.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

This new algorithm adds support for wiping volumes using TRIM.

It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.

It depends on the backing storage pool how this is handled.

A SCSI backend might send UNMAP commands to remove all data present
on a LUN.

A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

When wiping the RBD image will be filled with zeros started
at offset 0 and until the end of the volume.

This will result in the RBD volume growing to it's full allocation
on the Ceph cluster. All data on the volume will be overwritten
however, making it unavailable.

It does NOT take any RBD snapshots into account. The original data
might still be in a snapshot of that RBD volume.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

Use the cast of (virStorageVolWipeAlgorithm) adding the missing case:'s
(VIR_STORAGE_VOL_WIPE_ALG_ZERO and VIR_STORAGE_VOL_WIPE_ALG_LAST).

Additionally, the old code would also still run the SCRUB command on
default since it didn't go to cleanup when a invalid flag was supplied.
We now go to cleanup and exit if a invalid flag would be provided.
Signed-off-by: NWido den Hollander <wido@widodh.nl>

When commit id '82c1740a' made changes to the output format (changing from
using a ',' separator to '#'), the examples in the lvs output from the
comments weren't changed.

Additionally, the two new fields added ('segtype' and 'stripes') were
not included in the output, leaving it well confusing.

This patch fixes the sample output, adds a 'striped' example, and makes
other comment related adjustments for long line and spacing between followup
'NB' remarks (while I'm there).
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The affected functions are:

  virPCIDeviceGetManaged()
  virPCIDeviceGetUnbindFromStub()
  virPCIDeviceGetRemoveSlot()
  virPCIDeviceGetReprobe()

Change their return type from unsigned int to bool: the corresponding
members in struct _virPCIDevice are defined as bool, and even the
corresponding virPCIDeviceSet*() functions take a bool value as input
so there's no point in these functions having unsigned int as return
type.
Suggested-by: NJohn Ferlan <jferlan@redhat.com>

In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>