Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

from virDomainDefPtr to virDomainObjPtr so that the function has
access to the other parts of the virDomainObjPtr. Take advantage of
this by removing the "priv" arg and retrieving it from the
virDomainObjPtr instead.

No functional change.

Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.

This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:

  error: Failed to detach device from channel-tcp.xml
  error: internal error: unable to execute QEMU command 'chardev-add':
  No TLS credentials with id 'objcharchannel3_tls0'

In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".

The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.

This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We need to make sure that the chardev is TCP.  Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1366108

There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.

Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Qemu always opens the tray if forced to. Skip the waiting step in such
case.

This also helps if qemu does not report the tray change event when
opening the cdrom forcibly (the documentation says that the event will
not be sent although qemu in fact does trigger it even if @force is
selceted).

This is a workaround for a qemu issue where qemu does not send the tray
change event in some cases (after migration with empty closed locked
drive) and thus renders the cdrom useless from libvirt's point of view.

Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1368368

If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.

Likewise, if the environment exists the hot unplug needs adjustment as
well.  Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The linkstate setting of an <interface> is only meant to change the
online status reported to the guest system by the emulated network
device driver in qemu, but when support for auto-creating tap devices
for <interface type='ethernet'> was added in commit 9717d6, a chunk of
code was also added to qemuDomainChangeNetLinkState() that sets the
online status of the tap device (i.e. the *host* side of the
interface) for type='ethernet'. This was never done for tap devices
used in type='bridge' or type='network' interfaces, nor was it done in
the past for tap devices created by external scripts for
type='ethernet', so we shouldn't be doing it now.

This patch removes the bit of code in qemuDomainChangeNetLinkState()
that modifies online status of the tap device.

This patch removes the old vcpu unplug code completely and replaces it
with the new code using device_del. The old hotplug code basically never
worked with any recent qemu and thus is useless.

As the new code is using device_del all the implications of using it
are present. Contrary to the device deletion code, the vcpu deletion
code fails if the unplug request is not executed in time.

Add a overlay function that takes the alias directly rather than
extracting it from a device info.

https://bugzilla.redhat.com/show_bug.cgi?id=1289391

Rather than pass the whole drive string (which contained the alias),
pass only the alias for the qemuMonitorDriveDel call in the error
path when adding a host device in the monitor fails.

When building the command line alias and for SCSI Host Device deletion,
use the common API to build the alias

Completion of fix for:
    https://bugzilla.redhat.com/show_bug.cgi?id=1336225

Similar to the other disk types, add the qemuMonitorDriveDel in the failure
to add/hotplug a SCSI disk.

Partial fix for:
    https://bugzilla.redhat.com/show_bug.cgi?id=1336225

Similar to the other disk types, add the qemuMonitorDriveDel in the failure
to add/hotplug a USB.

Added a couple of other formatting changes just to have a less cluttered look

Rather than open code build the drive alias command in multiple places,
use the helper to ensure consistency.

Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.

Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h

Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".

Modify the error/exit path to match what was done for Virtio and SCSI.
If nothing else it'll have a consistent look'n'feel

The current LUKS support has a "luks" volume type which has
a "luks" encryption format.

This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)

IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.

IOW, when creating a storage volume we should use this XML

  <volume>
    <name>demo.raw</name>
    <capacity>5368709120</capacity>
    <target>
      <format type='raw'/>
      <encryption format='luks'>
        <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
      </encryption>
    </target>
  </volume>

and when configuring a guest disk we should use

  <disk type='file' device='disk'>
    <driver name='qemu' type='raw'/>
    <source file='/home/berrange/VirtualMachines/demo.raw'/>
    <target dev='sda' bus='scsi'/>
    <encryption format='luks'>
      <secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
    </encryption>
  </disk>

This commit thus removes the "luks" storage volume type added
in

  commit 318ebb36
  Author: John Ferlan <jferlan@redhat.com>
  Date:   Tue Jun 21 12:59:54 2016 -0400

    util: Add 'luks' to the FileTypeInfo

The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.

The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.

The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format.  I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Dropping the caching of ccw address set.
Instead of using the cached address set, functions in qemu_hotplug.c
now recalculate it on demand.

Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.

Credit goes to Cole Robinson.

Since return code is checked globally at the end of the function, let's
make sure that we set it correctly at any point.

This fixes a regression introduced in commit 0aa19f35 where the first
command to eject changeable media would fail unconditionally.
Signed-off-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

USB disks, redirected devices, host devices and serial devices
are supported.

A post push realization that the boolean should be set inside the condition

A post push realization that the setting of the boolean needed to be
inside the if condition.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021

Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.

For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.

Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).

Add the .args output for adding the LUKS disk to the domain
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Soon we will be adding luks encryption support. Since a volume could require
both a luks secret and a secret to give to the server to use of the device,
alter the alias generation to create a slightly different alias so that
we don't have two objects with the same alias.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit id 'a1344f70' added AES secret processing for RBD when starting
up a guest. As such, when the hotplug code calls qemuDomainSecretDiskPrepare
an AES secret could be added to the disk about to be hotplugged. If an AES
secret was added, then the hotplug code would need to generate the secret
object because qemuBuildDriveStr would add the "password-secret=" to the
returned 'driveStr' rather than the base64 encoded password.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

A recent adjustment to qemuDomainAttachRNGDevice to properly cleanup
the props object after a qemuMonitorAddObject also would affect this
code. Alter the cleanup to be similar to RNG changes.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.

A device with an attribute 'model', with just one model
so far:

<devices>
  ...
  <iommu model='intel'/>
</devices>

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>