- 10 12月, 2010 1 次提交
-
-
由 Josh Durgin 提交于
Signed-off-by: NJosh Durgin <joshd@hq.newdream.net>
-
- 08 12月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
Commit febc5916 introduced -vga none in case no video card is included in domain XML. However, old qemu versions do not support this and such domain cannot be successfully started.
-
- 03 12月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/qemu/qemu_conf.c (qemudExtractVersionInfo): Check for file before executing it here, rather than in callers. (qemudBuildCommandLine): Rewrite with virCommand. * src/qemu/qemu_conf.h (qemudBuildCommandLine): Update signature. * src/qemu/qemu_driver.c (qemuAssignPCIAddresses) (qemudStartVMDaemon, qemuDomainXMLToNative): Adjust callers.
-
- 02 12月, 2010 2 次提交
-
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
This patch allows for using custom scripts instead of /usr/bin/qemu emulator in domain XML. To do so, one would specify relative path to the custom script in <emulator/>. The path needs to be relative to qemuxml2argvdata directory and it will be transparently made absolute in runtime. The expected command line needs to contain the exact relative path as was used in domain XML. The problem is RelaxNG schema for domain XML only allows for absolute path within <emulator/>. To workaround it, an extra '/' must be added at the beginning of the path. That is, instead of "./qemu.sh" or "../emulator/qemu.sh" one would use "/./qemu.sh" or "/../emulator/qemu.sh". The extra slash is removed before further processing. I don't like this workaround, it's very ugly but it's the best option I was able to come up with. Relaxing domain XML schema is not an option IMO.
-
- 01 12月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
- configure.ac libvirt.spec.in: bump version, add a missing systemtap build requirement - docs/news.html.in: add informations about the release - po/*: updated Polish and Dutch localizations, and regenerated - tests/qemuxml2argvtest.c: Fix build problem
-
- 29 11月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 09 11月, 2010 3 次提交
-
-
由 Daniel P. Berrange 提交于
In common with VNC, the QEMU driver configuration file is used specify the host level TLS certificate location and a default password / listen address * src/qemu/qemu.conf: Add spice_listen, spice_tls, spice_tls_x509_cert_dir & spice_password config params * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of spice config parameters and updating -spice arg generation to use them * tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args, tests/qemuxml2argvtest.c: Expand test case to cover driver level configuration
-
由 Daniel P. Berrange 提交于
This supports the -spice argument posted for review against the latest upstream QEMU/KVM. This supports the bare minimum config with port, TLS port & listen address. The x509 bits are added in a later patch. * src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for -spice availability. Format -spice arg for command line * qemuhelptest.c: Add SPICE flag * qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics> for spice * qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg * qemuxml2argvtest.c: Add SPICE flag
-
由 Daniel P. Berrange 提交于
This supports the '-vga qxl' parameter in upstream QEMU/KVM which has SPICE support added. This isn't particularly useful until you get the next patch for -spice support. Also note that while the libvirt XML supports multiple video devices, this patch only supports a single one. A later patch can add support for 2nd, 3rd, etc PCI devices for QXL * src/qemu/qemu_conf.h: Flag for QXL support * src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it * tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test case for generating spice args with RHEL6 kvm
-
- 08 11月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
-
- 26 10月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
So far, readonly=on option is used when qemu supports -device. However, there are qemu versions which support readonly option with -drive although they don't have support for -device.
-
- 23 10月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 20 10月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/qemu/qemu_conf.c (qemuParseCommandLineSmp): Distinguish between vcpus and maxvcpus, for new enough qemu. * tests/qemuargv2xmltest.c (mymain): Add new test. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qemuxml2argvdata/qemuxml2argv-smp.args: New file.
-
- 13 10月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Make use of the existing <filesystem> element to support plan9fs filesystem passthrough in the QEMU driver <filesystem type='mount'> <source dir='/export/to/guest'/> <target dir='/import/from/host'/> </filesystem> NB, the target is not actually a directory, it is merely a arbitrary string tag that is exported to the guest as a hint for where to mount it.
-
- 29 7月, 2010 2 次提交
-
-
由 Cole Robinson 提交于
Enable specifying a virtio console device with: <console type='pty'> <target type='virtio'/> </console>
-
由 Cole Robinson 提交于
Add tests for auto memballon, implicit IDE, SCSI, virtio channel controllers, and console/serial back compat. Additionally, an explicit qemuxml2argvtest for scsi disks is added. Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 28 7月, 2010 1 次提交
-
-
由 Cole Robinson 提交于
Add a new element to the <os> block: <bootmenu enable="yes|no"/> Which maps to -boot,menu=on|off on the QEMU command line. I decided to use an explicit 'enable' attribute rather than just make the bootmenu element boolean. This allows us to treat lack of a bootmenu element as 'use hypervisor default'.
-
- 24 7月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Thanks to DV for knocking together the Relax-NG changes quickly for me. Changes since v1: - Change the domain.rng to correspond to the new schema - Don't allocate caps->ns in testQemuCapsInit since it is a static table Changes since v2: - Change domain.rng to add restrictions on allowed environment names Changes since v3: - Remove a bogus comment in the tests Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 21 7月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
To allow compatibility with older QEMU PCI device slot assignment it is necessary to explicitly track the balloon device in the XML. This introduces a new device <memballoon model='virtio|xen'/> It can also have a PCI address, auto-assigned if necessary. The memballoon will be automatically added to all Xen and QEMU guests by default. * docs/schemas/domain.rng: Add <memballoon> element * src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and formatting for memballoon device. Always add a memory balloon device to Xen/QEMU if none exists in XML * src/libvirt_private.syms: Export memballoon model APIs * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the PCI device address in memory balloon device * tests/*: Update to test new functionality
-
- 25 6月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
The previous change which split -nodefconfig probing off from -device broke the test case because it missed adding the QEMUD_CMD_FLAG_NODEFCONFIG to the test * src/util/bridge.c: Set QEMUD_CMD_FLAG_NODEFCONFIG for all configs with QEMUD_CMD_FLAG_DEVICE set
-
- 08 6月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
The virtio serial changes broke the test suite because they forgot to add the new address attribute to the domain XML schema. The xml2xml test also broke because the XML no longer roundtrips. This is due to testing of auto-addition of <controller> elements. Split that test case off into a separate XML file to avoid breakage * docs/schemas/domain.rng: Allow port number for virtio serial addresses * tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args, tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Revert to a simple config to avoid breaking xml2xml test * tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.xml, tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args: Add complex test case for auto-controller addition for xml2argv test * tests/qemuxml2argvtest.c: Add channel-virtio-auto test
-
- 05 4月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 27 3月, 2010 1 次提交
-
-
由 David Allan 提交于
* Fixes per feedback from Dan and Daniel * Added test datafiles * Re-disabled JSON flags * Added code to print the error policy attribute when generating XML * Re-add empty tag
-
- 16 3月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
* src/qemu/qemu_conf.c: add the ",readonly=on" for read-only disks and also parse it back in qemuParseCommandLineDisk() * tests/qemuxml2argvtest.c tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.args tests/qemuxml2argvdata/qemuxml2argv-disk-drive-readonly-disk.xml: add a specific regression test
-
- 10 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* global: patch created by running: for f in $(git ls-files '*.[ch]') ; do cppi $f > $f.t && mv $f.t $f done
-
- 02 3月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
Allow an arbitrary timezone with QEMU by setting the $TZ environment variable when launching QEMU * src/qemu/qemu_conf.c: Set TZ environment variable if a timezone is requested * tests/qemuxml2argvtest.c: Add test case for timezones * tests/qemuxml2argvdata/qemuxml2argv-clock-france.xml, tests/qemuxml2argvdata/qemuxml2argv-clock-france.args: Data for timezone tests
-
由 Daniel P. Berrange 提交于
This allows QEMU guests to be started with an arbitrary clock offset The test case can't actually be enabled, since QEMU argv expects an absolute timestring, and this will obviously change every time the test runs :-( Hopefully QEMU will allow a relative time offset in the future. * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg if available to support variable clock offset mode * tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1 * qemuxml2argvdata/qemuxml2argv-clock-variable.args, qemuxml2argvdata/qemuxml2argv-clock-variable.xml, qemuxml2argvtest.c: Test case, except we can't actually enable it yet.
-
- 19 2月, 2010 1 次提交
-
-
由 Matthew Booth 提交于
Support virtio-serial controller and virtio channel in QEMU backend. Will output the following for virtio-serial controller: -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4 and the following for a virtio channel: -chardev pty,id=channel0 \ -device virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0 * src/qemu/qemu_conf.c: Add argument output for virtio * tests/qemuxml2argvtest.c tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for QEMU command line generation
-
- 17 2月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Handle malloc failure.
-
- 10 2月, 2010 3 次提交
-
-
由 Daniel P. Berrange 提交于
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr args as mandatory non-null so the compiler can warn of mistakes * src/conf/domain_event.h: All virConnectPtr args must be non-null * src/qemu/qemu_conf.h: qemudBuildCommandLine and qemudNetworkIfaceConnect() must be given non-null connection * tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to qemudBuildCommandLine()
-
由 Daniel P. Berrange 提交于
The QEMU flags are commonly stored as a signed or unsigned int, allowing only 31 flags. This limit is rather close, so to aid future patches, change it to a 64-bit int * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c: Use 'unsigned long long' for QEMU flags
-
由 Daniel P. Berrange 提交于
-
- 03 2月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
The QEMU 0.12.x tree has the -netdev command line argument, but not corresponding monitor command. We can't enable the former, without the latter since it will break hotplug/unplug. * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage until 0.13 at earliest * tests/qemuxml2argvtest.c: Add test for -netdev syntax * tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args, tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test data files for -netdev syntax
-
由 Daniel P. Berrange 提交于
The current QEMU code allocates PCI addresses incrementally starting at 4. This is not satisfactory because the user may have given some addresses in their XML config, which need to be skipped over when allocating addresses to remaining devices. It is thus neccessary to maintain a list of already allocated PCI addresses and then only allocate ones that remain unused. This is also required for domain device hotplug to work properly later. * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating list of existing PCI addresses, and allocating new addresses. Refactor address assignment to use this code * src/qemu/qemu_driver.c: Pull PCI address assignment up into the qemuStartVMDaemon() method, as a prelude to moving it into the 'define' method. Update list of allocated addresses when connecting to a running VM at daemon startup. * tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c, tests/qemuxml2xmltest.c: Remove USB product test since all passthrough is done based on address * tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args, tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil unused data files
-
- 21 1月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
The test expected all environment variables copied in qemudBuildCommandLine to have known values. So all of them have to be either set to a known value or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but should be handled. Unset both, otherwise the test will fail if they are set in the testing environment. * src/qemu/qemu_conf.c: add a comment about copied environment variables and qemuxml2argvtest * tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
-
- 18 1月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
QEMU always configures a VGA card. If no video card is included in the libvirt XML, it is neccessary to explicitly turn off the default using -vga none * src/qemu/qemu_conf.c: Pass -vga none if no video card is configured * tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for handling -vga none. * tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args, tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test data files
-
由 Daniel P. Berrange 提交于
The old syntax is -pcidevice host=BUS:SLOT:FUNCTION The new syntax is -device pci-assign,host=BUS:SLOT:FUNCTION,addr=<PCI SLOT>,id=host0
-
由 Daniel P. Berrange 提交于
The old syntax was -usbdevice host:PRODUCT:VENDOR Or -usbdevice host:BUS.DEV The new syntax is -device usb-host,product=PRODUCT,vendor=VENDOR Or -device usb-host,hostbus=BUS,hostaddr=DEV
-
由 Daniel P. Berrange 提交于
The previous syntax was severely limited in its options -usbdevice disk:/home/berrange/output.img The new syntax is the same as for other disk types -drive file=/home/berrange/output.img,if=none,id=usb-1,index=1 -device usb-storage,drive=usb-1 Again, the index= arg is wrong here, and will be removed in a later merge
-