Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduced in v3.0.0-rc1~336, the commit message doesn't really
justifies the expensive domain def copy creation. Now, that
vm->def is guarded in this function by job acquirement we can use
vm->def directly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

These two functions work with vm->def in their critical sections
(i.e. after the job was acquired and before it is released). But
that means, they need QUERY domain job too to prevent vm->def
change.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The remote client invokes the 'nc' binary on the remote server to tunnel
access to the socket. As such the 'nc' binary needs to be pulled in only
by the libvirt-daemon sub-RPM, not the libvirt-client sub-RPM.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The 'nc' RPM does not in fact exist anymore, this is a virtual provide
from the nmap-ncat RPM which the maintainer wishes to delete. Change the
dep to use the actual binary path we want to invoke.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Currently during RPM upgrade we restart libvirtd and unconditionally
enable use of systemd socket activation for the UNIX sockets.

If the user had previously given the --listen arg to libvirtd though,
this will no longer be honoured if socket activation is used.

We could start libvirtd-tcp.socket or libvirtd-tls.socket for this,
but mgmt tools like puppet/ansible might not be expecting this.
So for now we silently disable socket activation if we see --listen
was previously set on the host.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When using systemd socket activation the --listen arg has no
effect. This is confusing to users upgrading from previous versions of
libvirt as their config is silently ignored. Turn use of --listen into a
fatal error when sockets are passed from systemd.

This helps the admin discover the change in behaviour and thus decide
whether to stick with socket activation or revert to previous behaviour.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We need to give users the ability to customize the length of the
shutdown timeout, or even disable timeouts entirely. Thus we must move
the timeout arg into the sysconf file, instead of the service unit.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

To facilitate upgrades from earlier versions of libvirt which did not
use socket activation for libvirtd, we want to allow the libvirtd socket
units to be disabled (masked). This can only be supported if we use the
weaker Wants statement instead of Requires.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Use the %{_rundir} RPM variable to set the configure runstatedir
variable to /run.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Many distros have moved /var/run to /run with the introduction of
systemd. /var/run still exists as a symlink to /run, but its usage
is deprecated.

autoconf added a --runstatedir option back in 2013 but there's still no
new release of autoconf that includes this.

gnulib meanwhile added support to propagate this arg's value to
configmake.h, but it falls back to $localstatedir/run for autoconf 2.69
and older, which is what every distro today has.

To deal with this problem we add a --with-runstatedir arg that then sets
the $runstatedir env variable that future autoconf's --runstatedir arg
will also use. This finally enables $runstatedir to be pointed to /run.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.

Some duplicate paths in the apparmor code are also purged.

There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Creating various directories using $(runstatedir) instead of
$(localstatedir)/run.

There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If a systemd socket uses /var/run in its path, systemd prints a warning
at runtime

[   15.139976] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:5:
  ListenStream= references a path below legacy directory /var/run/,
  updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock;
  please update the unit file accordingly.

This minimal change updates the socket unit files to honour the
$runstatedir path.

There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The recent cleanups allow us to clean up the code a bit.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Now that it's only used once.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

That way devstr will only be used for the device string.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Instead of getting the string then passing it to virCommand.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Use separate variables for the chardev and the device.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Reduce the scope of the variable to get it freed for every controller
processed.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Remove the VIR_FREE's from the cleanup sections.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Simplify the code by annotating all the temporary virBuffers
with VIR_AUTOCLEAN.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

s/strign/string/
Signed-off-by: NJán Tomko <jtomko@redhat.com>

After the legacy xen driver was removed the libxl driver became
the only consumer of xenconfig. Move the few files in xenconfig
to the libxl driver and remove the directory.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Iimplements the new guest information API by querying requested
information via the guest agent.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function adds the complete filesystem information returned by the
qemu agent to an array of typed parameters with field names intended to
to be returned by virDomainGetGuestInfo()
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Since version 3.0, qemu has returned disk usage statistics in
guest-get-fsinfo. And since 3.1, it has returned information about the
disk serial number and device node of disks that are targeted by the
filesystem.

Unfortunately, the public API virDomainGetFSInfo() returns the
filesystem info using a virDomainFSInfo struct, and due to API/ABI
guarantees it cannot be extended. So this new information cannot
easily be added to the public API. However, it is possible to add this
new filesystem information to a new virDomainGetGuestInfo() API which
will be based on typed parameters and is thus more extensible.

In order to support these two use cases, I added an internal struct
which the agent code uses to return all of the new data fields. This
internal struct can be converted to the public struct at a cost of some
extra memory allocation.

In a following commit, this additional information will be used within
virDomainGetGuestInfo().
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function queries timezone information within the guest and adds
the information to an array of typed parameters with field names
intended to be returned to virDomainGetGuestInfo()
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function queries the guest operating system information and adds
the returned information to an array of typed parameters with field
names intended to be returned in virDomainGetGuestInfo().
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This function fetches the list of logged-in users from the qemu agent
and adds them to a list of typed parameters so that they can be used
internally in libvirt.

Also add some basic tests for the function.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Add daemon and client code to serialize/deserialize
virDomainGetGuestInfo().
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

This API is intended to aggregate several guest agent information
queries and is ispired by stats API virDomainListGetStats(). It is
anticipated that this information will be provided by a guest agent
running within the domain.
Signed-off-by: NJonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Move the internals into qemuDomainSnapshotDiskDataCollectOne to make it
obvious what's happening after moving more code here.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>