Rather than an opencoded string. This should be a no-op

This patch adds code that parses and formats configuration for memory
devices.

A simple configuration would be:
<memory model='dimm'>
  <target>
    <size unit='KiB'>524287</size>
    <node>0</node>
  </target>
</memory>

A complete configuration of a memory device:
<memory model='dimm'>
  <source>
    <pagesize unit='KiB'>4096</pagesize>
    <nodemask>1-3</nodemask>
  </source>
  <target>
    <size unit='KiB'>524287</size>
    <node>1</node>
  </target>
</memory>

This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.

Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.

To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.

As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.

To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.

The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.

Note that the comments for the functions are future aware and document
state that will be present after a few later patches.

Coverity notes in xenapiDomainGetXMLDesc that 'vms' is dereferenced
a few times before a "if (vms) xen_vm_set_free(vms);" call is made.
Since we'd exit out much sooner if the fetch of the vms failed, just
remove the unnecessary "if (vms)" check.

Coverity points out that the return from virDomainDefParseString is
not checked in xenapiDomainCreateXML like it should be which could
end up in a NULL pointer dereference

Since inception.  Coverity complains that the code checks "(record ==
NULL && !session->ok)", but doesn't check (record != NULL) before
dereferencing at "record->is_a_template"

Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.

This avoids spamming daemon logs when 'virsh dominfo' is run.

https://bugzilla.redhat.com/show_bug.cgi?id=1095637

For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.

For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.

This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants

struct _virConnectDriver {
    virHypervisorDriverPtr hypervisorDriver;
    virInterfaceDriverPtr interfaceDriver;
    virNetworkDriverPtr networkDriver;
    virNodeDeviceDriverPtr nodeDeviceDriver;
    virNWFilterDriverPtr nwfilterDriver;
    virSecretDriverPtr secretDriver;
    virStorageDriverPtr storageDriver;
};

Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Clang found that we are passing variable with wrong enum type to
'xenapiCrashExitEnum2virDomainLifecycle' function. This is probably
copy-paste typo as the correct variable exists in the code, but it isn't
used.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set

The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.

The XenAPI driver was passing the flags for
virDomainCreateXML straight into the virDomainDefParseString
method, even though they expect totally different sets of
flags. It should have been using VIR_DOMAIN_XML_INACTIVE

Make sure every virt driver implements virDomainDefineXMLFlags
by adding a trivial passthrough from the existing impl with
no flags set.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()

To allow easy implementation of a callback check this patch adds empty
post parse callbacks to drivers that were missing them.

Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.

Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files

The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This patch focuses on code related to xen.

* src/libxl/libxl_conf.c (libxlCapsInitGuests)
(libxlMakeDomBuildInfo): Correct use of {}.
* src/xen/xen_hypervisor.c (virXen_getvcpusinfo)
(xenHypervisorMakeCapabilitiesInternal): Likewise.
* src/xen/xend_internal.c (xenDaemonOpen)
(xenDaemonDomainMigratePerform, xend_detect_config_version)
(xenDaemonDetachDeviceFlags, xenDaemonDomainMigratePerform)
(xenDaemonDomainBlockPeek): Likewise.
* src/xenapi/xenapi_driver.c (xenapiConnectListDomains)
(xenapiDomainLookupByUUID, xenapiDomainGetOSType): Likewise.
* src/xenconfig/xen_common.c (xenParseCPUFeatures, xenFormatNet):
Likewise.
* src/xenconfig/xen_sxpr.c (xenParseSxpr, xenFormatSxprNet)
(xenFormatSxpr): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Laine Stump noted on IRC that syntax check wasn't flagging his
typo of 'i= 0'.  This fixes it.

* build-aux/bracket-spacing.pl: Tighten 'space around =' rule.
* src/storage/storage_backend.c
(virStorageBackendCreateExecCommand): Fix offenders.
* src/util/virnuma.c (virNumaGetDistances): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDeleteMetadataOnly)
(vboxNetworkGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainLookupByName):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

While preparing to add a capability for active commit, I noticed
that the existing code was abusing int for boolean values.

* src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost)
(virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve
types.
* src/conf/capabilities.c (virCapabilitiesNew)
(virCapabilitiesAddGuestFeature): Adjust signature.
* src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update
clients.
* src/esx/esx_driver.c (esxCapsInit): Likewise.
* src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise.
* src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise.
* src/openvz/openvz_conf.c (openvzCapsInit): Likewise.
* src/parallels/parallels_driver.c (parallelsBuildCapabilities):
Likewise.
* src/phyp/phyp_driver.c (phypCapsInit): Likewise.
* src/qemu/qemu_capabilities.c (virQEMUCapsInit)
(virQEMUCapsInitGuestFromBinary): Likewise.
* src/security/virt-aa-helper.c (get_definition): Likewise.
* src/test/test_driver.c (testBuildCapabilities): Likewise.
* src/uml/uml_conf.c (umlCapsInit): Likewise.
* src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise.
* src/vmware/vmware_conf.c (vmwareCapsInit): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities):
Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject): Likewise.
* tests/qemucaps2xmltest.c (testGetCaps): Likewise.
* tests/testutils.c (virTestGenericCapsInit): Likewise.
* tests/testutilslxc.c (testLXCCapsInit): Likewise.
* tests/testutilsqemu.c (testQemuCapsInit): Likewise.
* tests/testutilsxen.c (testXenCapsInit): Likewise.
* tests/vircaps2xmltest.c (buildVirCapabilities): Likewise.
* tests/vircapstest.c (buildNUMATopology): Likewise.
* tests/vmx2xmltest.c (testCapsInit): Likewise.
* tests/xml2vmxtest.c (testCapsInit): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

In the lastest rework (9e7ecabf) a cleanup label was left over which
results in compilation error.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.

Be consistent and always report error in virCapabilitiesFormatXML.

Currently, only LXC has hostdev mode 'capabilities' support,
so the other drivers should forbid to define it in XML.
The hostdev mode check is added to devicesPostParseCallback()
for each hypervisor driver.

But there are some drivers lack function devicesPostParseCallback(),
so only add check for qemu, libxl, openvz, uml, xen, xenapi.
Signed-off-by: NJincheng Miao <jmiao@redhat.com>

Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/libxl/libxl_driver.c: Consistently use commas.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenxs/xen_sxpr.c: Likewise.
* src/xenxs/xen_xm.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.

To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.

Fix the if statement coding style.
Signed-off-by: NHongwei Bi <hwbi2008@gmail.com>

In commit d2467709 the header of one of
the post parse callbacks was changed, but the function used as the
callback in the xenapi driver wasn't adapted. This resulted into:

  CC       xenapi/libvirt_driver_xenapi_la-xenapi_utils.lo
 xenapi/xenapi_driver.c:63:5: error: initialization from incompatible pointer type [-Werror]
 xenapi/xenapi_driver.c:63:5: error: (near initialization for 'xenapiDomainDefParserConfig.devicesPostParseCallback') [-Werror]

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.

Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.

eg for the public API   virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.