Right now users need to know input file live inside
TEST_QEMU_CAPS_PATH, which is bad layering.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

We're going to depend on the fact that the suffix starts with a
dot later on, so we better ensure that it does.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

If files whose name doesn't follow the expected format are added
to the repository, it's better to make the test suite fail than to
silently ignore them.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

We'll need this later.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Libtool gets a wrong order of arguments of libraries to install and it
fails when installing libvirt-admin.so that libvirt.so is not yet
installed.  Caused by commit <3097282d>.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

In few places we have the following code pattern:

  int ret;
  ... /* @ret is not accessed here */
  ret = f(...);
  return ret;

This pattern can be written less verbose:

  ...
  return f(...);

This patch was generated with following coccinelle spatch:

  @@
  type T;
  constant C;
  expression f;
  identifier ret;
  @@
  -T ret = C;
   ... when != ret
  -ret = f;
  -return ret;
  +return f;

Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

In v5.8.0-332-g3097282d the libvirt-admin.so was moved into
src/admin/ directory. However, corresponding .gitignore change
was left out.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These two functions have pattern that's preventing us from
simpler virAsprintf() -> g_strdup_printf() transition. Modify
their logic a bit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In a few places our code relies on the fact that virAsprintf()
not only prints to allocated string but also that it returns the
length of that string. Fortunately, only few such places were
identified:

  https://www.redhat.com/archives/libvir-list/2019-September/msg01382.html

In case of virNWFilterSnoopLeaseFileWrite() and virFilePrintf()
we can use strlen() right after virAsprintf() to calculate the
length. In case of virDoubleToStr() it's only caller checks for
error case only, so we can limit the set of returned values to
just [-1, 0].
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Historically we did not support VPATH builds and everything was
generated into source directory.  The introduction of VPATH builds did
not changed the way how our documentation is handled.

This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is no need to keep old compatibility code around as it it will
never be used in our current source tree.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit <124f0653> moved remote related
build rules into separate makefile but forgot to move this part as well.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is no need to have the libvirt-admin.so library definition in the
src directory.  In addition the library uses directly code from admin
sub-directory so move the remaining bits there as well.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Follow the same pattern as for other sub-directories where we create a
static library that is linked into libvirt.so.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Follow the same pattern as for other sub-directories where we create a
static library that is linked into libvirt.so.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This version is available on all supported OSes and includes the
transaction APIs.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All supported OSes have libnl-3.0 and netcf uses it so there is no need
to keep libnl-1.0 compatibility code.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In domain_conf.c we have virDomainSCSIDriveAddressIsUsed()
function which returns true or false if given drive address is
already in use for given domain config or not. However, it also
takes a shortcut and returns true (meaning address in use) if the
unit number equals 7. This is because for some controllers this
is reserved address. The limitation comes mostly from vmware and
applies to lsilogic, buslogic, spapr-vscsi and vmpvscsi models.
On the other hand, we were not checking for the maximum unit
number (aka LUN number) which is also relevant and differs from
model to model.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

So far, the virDomainDeviceFindSCSIController() takes
virDomainDeviceInfo structure which is an overkill. It assumes
that the passed structure is type of
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE which is not obvious.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

s/verca/versa/
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Include the 'semi-automatic' updates in the list of patches pushed
at maintainers' discretion to match current practice.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Replace reference to VIR_FREE with g_free and mention the use
of g_auto cleanup attributes that eliminate most of label use.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Prefer G_GNUC_PRINTF.

Also, pick another example than virAsprintf since it may get
removed in the future.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Recommend GString for generic strings and virBuffer for strings
that need helpers for other uses, like XML or command line
formatting.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Recommend g_str(n)dup instead of VIR_STRDUP.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Document the preferred alternatives to existing libvirt macros for
allocating strings. These cannot be deleted just yet because
converting them will require a lot of work.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Document the preferred alternatives to existing libvirt macros for
memory allocation. These cannot be deleted just yet because
converting them will require a lot of work.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Mention all the __attribute__ annotations we use to make the compiler
and/or the static analysis tools understand the code better.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Mention the various ATTRIBUTE* macros and ARRAY_CARDINALITY
that were removed earlier.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Mention a more complex example.

Invoke the test without 'make' since the mentioned example
does not seem to be working anymore.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Our HACKING file is clear about requiring submission from a git
checkout, which automatically enables -Werror.

Remove the mentions of explicitly enabling it to alleviate
the collective cognitive encumbrance.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Namely:
* holding up the first-time patch submissions for moderation,
  which might cause first-time submitters to question the process
* not CC-ing individual developers
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

This tool takes care of many of the tedious parts of submitting
a patch. Mention it first, above the "manual" way using
git send-email.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

It has been enabled by default for over three years now:

commit 5d2a30d7d8777319c745804f040fa405d02169ce
Author:     Junio C Hamano <gitster@pobox.com>
CommitDate: 2016-04-03 10:29:22 -0700

    Merge branch 'mm/diff-renames-default'

https://github.com/git/git/commit/5d2a30d7d8777319c745804f040fa405d02169ceSigned-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

This simplifies some functions, but mostly
libxlDomainManagedSavePath() which is going to be modified in
future commits.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

= and == are both operators to test for string equality in bash,
but only = is required by POSIX.
Signed-off-by: NMaya Rashish <coypu@sdf.org>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

The file is generated during build, but not ignored.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>