Rename the function to virDomainDefCheckDuplicateDiskInfo and make it
check disk serials too.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245013

Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.

Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.

The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.

The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.

In summary this patch should have no functional impact at this point.

The name of the variable was misleading. Rename it and it's setting
accessor before other fixes.

Add a simple helper so that the code doesn't have to rewrite the same
condition multiple times.

Similar to commit id '35847860', it's possible to attempt to create
a 'netfs' directory in an NFS root-squash environment which will cause
the 'vol-delete' command to fail.  It's also possible error paths from
the 'vol-create' would result in an error to remove a created directory
if the permissions were incorrect (and disallowed root access).

Thus rename the virFileUnlink to be virFileRemove to match the C API
functionality, adjust the code to following using rmdir or unlink
depending on the path type, and then use/call it for the VIR_STORAGE_VOL_DIR

I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed.  I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These functions were made static as a part of commit cbfe38c since
they were no longer called from outside virnetdev.c. We once again
need to call them from another file, so this patch makes them once
again public.

In an NFS root-squashed environment the 'vol-delete' command will fail to
'unlink' the target volume since it was created under a different uid:gid.

This code continues the concepts introduced in virFileOpenForked and
virDirCreate[NoFork] with respect to running the unlink command under
the uid/gid of the child. Unlike the other two, don't retry on EACCES
(that's why we're here doing this now).

That function can be used for setting security labels on arbitrary
directories.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since now they were not needed, but I sense they will be in a short
while.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

That function takes string list and returns first string in that list
that starts with the @prefix parameter with that prefix being skipped as
the caller knows what it starts with (also for easier manipulation in
future).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.

We just need to update the entry in the second hash table. Since commit 8728a565
we have two hash tables for the domain list so that we can do O(1) lookup
regardless of looking up by UUID or name. Since with renaming a domain UUID does
not change, we only need to update the second hash table, where domains are
referenced by their name.

We will call both functions from the qemuDomainRename().
Signed-off-by: NTomas Meszaros <exo@tty.sk>

This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:

  <controller type='pci' model='dmi-to-pci-bridge' index='1'>
    <model name='i82801b11-bridge'/>
  </controller>

In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".

Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.

(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)

This function should return the greatest CPU number set in
/domain/cpu/numa/cell/@cpus. The idea is that we should compare
the returned value against /domain/vcpu value. Yes, there exist
users who think the following is a good idea:

  <vcpu placement='static'>4</vcpu>
  <cpu mode='host-model'>
    <model fallback='allow'/>
    <numa>
      <cell id='0' cpus='0-1' memory='1048576' unit='KiB'/>
      <cell id='1' cpus='9-10' memory='2097152' unit='KiB'/>
    </numa>
  </cpu>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Qemu reports physical size 0 for block devices. As 15fa84ac
changed the behavior of qemuDomainGetBlockInfo to just query the monitor
this created a regression since we didn't report the size correctly any
more.

This patch adds code to refresh the physical size of a block device by
opening it and seeking to the end and uses it both in
qemuDomainGetBlockInfo and also in qemuDomainGetStatsOneBlock that was
broken since it was introduced in this respect.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250982

The nodeinfo is reporting incorrect number of cpus and incorrect host
topology on PPC64 KVM hosts. The KVM hypervisor on PPC64 needs only
the primary thread in a core to be online, and the secondaries offlined.
While scheduling a guest in, the kvm scheduler wakes up the secondaries to
run in guest context.

The host scheduling of the guests happen at the core level(as only primary
thread is online). The kvm scheduler exploits as many threads of the core
as needed by guest. Further, starting POWER8, the processor allows splitting
a physical core into multiple subcores with 2 or 4 threads each. Again, only
the primary thread in a subcore is online in the host. The KVM-PPC
scheduler allows guests to exploit all the offline threads in the subcore,
by bringing them online when needed.
(Kernel patches on split-core http://www.spinics.net/lists/kvm-ppc/msg09121.html)

Recently with dynamic micro-threading changes in ppc-kvm, makes sure
to utilize all the offline cpus across guests, and across guests with
different cpu topologies.
(https://www.mail-archive.com/kvm@vger.kernel.org/msg115978.html)

Since the offline cpus are brought online in the guest context, it is safe
to count them as online. Nodeinfo today discounts these offline cpus from
cpu count/topology calclulation, and the nodeinfo output is not of any help
and the host appears overcommited when it is actually not.

The patch carefully counts those offline threads whose primary threads are
online. The host topology displayed by the nodeinfo is also fixed when the
host is in valid kvm state.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The new name makes it clear that the returned bitmap contains the
information about which CPUs are online, not eg. which CPUs are
present.

No behavioral change.

If one calls update-device with information that is not updatable,
libvirt reports success even though no data were updated.  The example
used in the bug linked below uses updating device with <boot order='2'/>
which, in my opinion, is a valid thing to request from user's
perspective.  Mainly since we properly error out if user wants to update
such data on a network device for example.

And since there are many things that might happen (update-device on disk
basically knows just how to change removable media), check for what's
changing and moreover, since the function might be usable in other
drivers (updating only disk path is a valid possibility) let's abstract
it for any two disks.

We can't possibly check for everything since for many fields our code
does not properly differentiate between default and unspecified values.
Even though this could be changed, I don't feel like it's worth the
complexity so it's not the aim of this patch.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1007228

Add virNetworkDefGetRouteByIndex() similarly to
virNetworkDefGetIpByIndex(), but for routes.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

A helper function for copying error objects.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This is a self-locking wrapper around virHashTable. Only a limited set
of APIs are implemented now (the ones which are used in the following
patch) as more can be added on demand.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

There are multiple consumers for the domain condition and we should
always wake them all.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

While working in qemu_monitor_json, I repeatedly found myself
getting a value then checking if it was an object.  Add some
wrappers to make this task easier.

* src/util/virjson.c (virJSONValueObjectGetByType)
(virJSONValueObjectGetObject, virJSONValueObjectGetArray): New
functions.
(virJSONValueObjectGetString, virJSONValueObjectGetNumberInt)
(virJSONValueObjectGetNumberUint)
(virJSONValueObjectGetNumberLong)
(virJSONValueObjectGetNumberUlong)
(virJSONValueObjectGetNumberDouble)
(virJSONValueObjectGetBoolean): Simplify.
(virJSONValueIsNull): Change return type.
* src/util/virjson.h: Reflect changes.
* src/libvirt_private.syms (virjson.h): Export them.
* tests/jsontest.c (testJSONLookup): New test.
Signed-off-by: NEric Blake <eblake@redhat.com>

The wrapper is useful for calling qemuBlockJobEventProcess with the
event details stored in disk's privateData, which is the most likely
usage of qemuBlockJobEventProcess.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Complex jobs, such as migration, need to monitor several events at once,
which is impossible when each of the event uses its own condition
variable. This patch adds a single condition variable to each domain
object. This variable can be used instead of the other event specific
conditions.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Add multikey API:

 * virTypedParamsFilter that filters all the parameters with specified name.
 * virTypedParamsGetStringList that returns a list with all the values for
   specified name and string type.
Signed-off-by: NPavel Boldin <pboldin@mirantis.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

virDomainObjGetOneDef will help to retrieve the correct definition
pointer from @vm in cases where VIR_DOMAIN_AFFECT_LIVE and
VIR_DOMAIN_AFFECT_CONFIG are mutually exclusive. The function simply
returns the correct pointer. This similarly to virDomainObjGetDefs will
greatly simplify the code.

https://bugzilla.redhat.com/show_bug.cgi?id=1220527

This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This function gets all the PIDs listed in /proc/PID/task. This will be
needed at least to move all qmeu-nbd tasks to the container cgroup.

Move all the system_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move all the bios_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Faster version of virJSONValueFromString(virJSONValueToString()).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

virDomainLiveConfigHelperMethod that is used for this job now does
modify the flags but still requires the callers to extract the correct
definition objects.

In addition coverity and other static analyzers are usually unhappy as
they don't grasp the fact that @flags are upadted according to the
correct def to be present.

To work this issue around and simplify the calling chain let's add a new
helper that will work only on drivers that always copy the persistent
def to a transient at start of a vm. This will allow to drop a few
arguments. The new function syntax will also fill two definition
pointers rather than modifying the @flags parameter.

Since some functions can be optimized by reusing the buffers that they
already have instead of allocating and copying new ones, lets split
virBitmapToData to two functions where one only converts the data and
the second one is a wrapper that allocates the buffer if necessary.

Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.

As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.

Sometimes the only thing we need is the pointer to virDomainDiskDef and
having to call virDomainDiskIndexBy* APIs, storing the disk index, and
looking it up in the disks array is ugly. After this patch, we can just
call virDomainDiskBy* and get the pointer in one step.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Two new domain configuration XML elements are added to enable/disable
the protected key management operations for a guest:

    <domain>
      ...
      <keywrap>
        <cipher name='aes|dea' state='on|off'/>
      </keywrap>
      ...
    </domain>
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: NDaniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Because there are multiple potential reasons for an error, this
function logs any errors before returning NULL (since the caller won't
have the information needed to determine which was the reason for
failure).