I did 'git add .' while in the middle of 'make syntax-check', and
it picked up a temporary file that should not be committed.

* .gitignore: Ignore sc_* from syntax check.

Regression introduced in commit 5d30db09.

* src/rpc/virnetsocket.c (virNetSocketNewListenUNIX) [WIN32]: Use
correct signature.

Regression introduced in commit b7e5ca48.

Mingw lacks kill(), but we were only using it for a sanity check;
so we can go with one less check.

Also, on OOM error, this function should outright fail rather than
claim that the pid file was successfully read.

* src/util/virpidfile.c (virPidFileReadPathIfAlive): Skip kill
call where unsupported, and report error on OOM.

If a client had initiated a stream abort, it will have a call
waiting for a reply in the queue. If more data continues to
arrive on the stream, the abort command could mistakenly get
signalled as complete. Remove the code from async data processing
that looked for waiting calls. Add a sanity check to ensure no
async call can ever be marked as needing a reply

* src/rpc/virnetclient.c: Ensure async data packets can't
  trigger a reply

The I/O event callback processes incoming packets first, and then
does outgoing packets. If the incoming packet caused the stream to
close, then the attempt to process outgoing data resulted in an
error. This caused libvirt to then send an error back to the client,
but the stream had already been stopped. This confused the client
since it sees 2 error events.

* daemon/stream.c: Don't attempt read if stream is closed

A virsh command like:

migrate --live --copy-storage-all Guest qemu+ssh://user@host/system
--persistent --verbose

shows

Migration: [  0 %]

during the storage copy and does not start counting
until the ram transfer starts

Fix this by scraping optional disk transfer status, and adding it
into the progress meter.

Call me lazy, but:

virsh qemu-monitor-command dom --hmp info status

is nicer than:

virsh qemu-monitor-command dom --hmp 'info status'

* tools/virsh.c (cmdQemuMonitorCommand): Allow multiple arguments,
for convenience.

Otherwise the device will still be bound to pci-stub driver even
it's set as "managed=yes" when do detaching. Of course, it won't
triger any driver reprobing too.

Fixes confusing docs introduced in commit 98369d31.

* tools/virsh.c (cmdSnapshotParent): Operates on named snapshot,
not current.

Make it clearer that a log message is for an outgoing message

If a stream gets a server initiated abort, the client may still
send an abort request before it receives the server side abort.
This causes the server to send back another abort for the
stream. Since the protocol defines that abort is the last thing
to be sent, the client gets confused by this second abort from
the server. If the stream is already shutdown, just drop any
client requested abort, rather than sending back another message.
This fixes the regression from previous versions.

Tested as follows

In one virsh session

  virsh # start foo
  virsh # console foo

In other virsh session

  virsh # destroy foo

The first virsh session should be able to continue issuing
commands without error. Prior to this patch it saw

  virsh # list
  error: Failed to list active domains
  error: An error occurred, but the cause is unknown

  virsh # list
  error: Failed to list active domains
  error: no call waiting for reply with prog 536903814 vers 1 serial 9

* src/rpc/virnetserverprogram.c: Drop abort requests
  for streams which no longer exist

Every active stream results in a reference being held on the
virNetServerClientPtr object. This meant that if a client quit
with any streams active, although all I/O was stopped the
virNetServerClientPtr object would leak. This causes libvirtd
to leak any file handles associated with open streams when a
client quit

To fix this, when we call virNetServerClientClose there is a
callback invoked which lets the daemon release the streams
and thus the extra references

* daemon/remote.c: Add a hook to close all streams
* daemon/stream.c, daemon/stream.h: Add API for releasing
  all streams
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
  Allow registration of a hook to trigger when closing client

After running 'virsh console' in interactive mode, there was a
missing call to virStreamAbort, which meant the server kept the
stream resources open

* tools/console.c: Abort stream when exiting

Get rid of the #if __linux__ check in virPidFileReadPathIfAlive that
was preventing a check of a symbolic link in /proc/<pid>/exe on
non-linux platforms against an expected executable. Replace
this with a run-time check testing whether the /proc/<pid>/exe is a
symbolic link and if so call the function doing the comparison
against the expected file the link is supposed to point to.

This patch fixes *some* compilation issues on non-Linux platforms (cygwin).

Early errors during start of libvirtd didn't have
an error reporting mechanism and caused libvirtd
to exit silently (only the return value indicated
an error).

Libvirt logging is initialized very early using
enviroment variables and the internal error reporting
API is used to report early errors.

 v2 changes:
 - print errors unconditionaly before logging starts
 - fix message to US spelling
 v2.5 changes:
 - initialize logging from enviroment
 - log all early errors using VIR_ERROR
 v3 changes:
 - move virSetLogFromEnv() after virInitialize()

fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728654

Add missing symbols to libvirt_private.syms.

This patch renames getPhysfn to getPhysfnDev and adds code to get the
Physical function and Virtual Function index of the direct attach linkdev (if
the direct attach interface is a SRIOV VF). The idea is to send the port
profile message to a PF if the direct attach interface is a SRIOV VF.
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>

This patch adds the following functions to get PF/VF relationship of an SRIOV
network interface:
ifaceIsVirtualFunction: Function to check if a network interface is a SRIOV VF
ifaceGetVirtualFunctionIndex: Function to get VF index if a network interface is a SRIOV VF
ifaceGetPhysicalFunction: Function to get the PF net interface name of a SRIOV VF net interface
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>

This patch adds the following helper functions:
pciDeviceIsVirtualFunction: Function to check if a pci device is a sriov VF
pciGetVirtualFunctionIndex: Function to get the VF index of a sriov VF
pciDeviceNetName: Function to get the network device name of a pci device
pciConfigAddressCompare: Function to compare pci config addresses
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

This patch moves some of the sriov related pci code from node_device driver
to src/util/pci.[ch]. Some functions had to go thru name and argument list
change to accommodate the move.
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>

* .gitignore: Ignore qemu-sanlock.conf.

In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).

As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).

docs/formatdomain.html.in: document the new flag (marking it as
   "don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
   virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
   disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
    when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.

Fix pointer for error message uri if domain migration fails.

BZ# 730244

By opening a connection to remote qemu process ourselves and passing the
socket to qemu we get much better errors than just "migration failed"
when the connection is opened by qemu.

The core of these two functions is very similar and most of it is even
exactly the same. Factor out the core functionality into a separate
function to remove code duplication and make further changes easier.

This patch allows owner's UID to be changed as well.

So that callers can change the default value.

* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add
  virNetSocketDupFD()
* src/rpc/virnetclient.c, src/rpc/virnetclient.h: Add
  virNetClientDupFD() and virNetClientGetFD()

The function stop() was always returning 0 (OK) from killproc() even
in case of error.

This is introduced by commit df0b57a9, which forgot to
add signal handler for SIGHUP.

A simple reproduce method:

1) Create a domain XML under /etc/libvirt/qemu
2) % kill -SIGHUP $(pidof libvirtd)
3) % virsh list --all (the new created domain XML is not listed)

* .dir-locals.el: Add nxml-mode preferences.

In preparation for storing the domain description with the snapshot,
swap the order of declaration.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

With gcc 4.5.1:

util/virpidfile.c: In function 'virPidFileAcquirePath':
util/virpidfile.c:308:66: error: nested extern declaration of '_gl_verify_function2' [-Wnested-externs]

Then in tests/commandtest.c, the new virPidFile APIs need to be used.

* src/util/virpidfile.c (virPidFileAcquirePath): Move verify to
top level.
* tests/commandtest.c: Use new pid APIs.

Remove the current libvirtd pidfile handling code, in favour of
calling out to the new APIs. This ensures libvirtd's pidfile
handling is crashsafe

This also means that the non-root libvirtd instances (for handling
qemu:///session URIs) can now safely use pidfiles without racing

* daemon/libvirtd.c: Switch to use virPidFileAcquire and
  virPidFileRelease

In daemons using pidfiles to protect against concurrent
execution there is a possibility that a crash may leave a stale
pidfile on disk, which then prevents later restart of the daemon.

To avoid this problem, introduce a pair of APIs which make
use of virFileLock to ensure crash-safe & race condition-safe
pidfile acquisition & releae

* src/libvirt_private.syms, src/util/virpidfile.c,
  src/util/virpidfile.h: Add virPidFileAcquire and virPidFileRelease

In some cases the caller of virPidFileRead might like extra checks
to determine whether the pid just read is really the one they are
expecting. This adds virPidFileReadIfAlive which will check whether
the pid is still alive with kill(0, -1), and (on linux only) will
look at /proc/$PID/path

* libvirt_private.syms, util/virpidfile.c, util/virpidfile.h: Add
  virPidFileReadIfValid and virPidFileReadPathIfValid
* network/bridge_driver.c: Use new APIs to check PID validity

The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix

* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
  handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
  qemu/qemu_process.c: Add virpidfile.h include and adapt for API
  renames

Add some simple wrappers around the fcntl() discretionary file
locking capability.

* src/util/util.c, src/util/util.h, src/libvirt_private.syms: Add
  virFileLock and virFileUnlock APIs