- 24 7月, 2014 1 次提交
-
-
由 John Ferlan 提交于
Create a separate typedef for the hostdev union data describing PCI. Then adjust the code to use the new pointer
-
- 23 7月, 2014 1 次提交
-
-
由 Ján Tomko 提交于
For the values "default", "on", "off" Replaces virDeviceAddressPCIMulti virDomainFeatureState virDomainIoEventFd virDomainVirtioEventIdx virDomainDiskCopyOnRead virDomainMemDump virDomainPCIRombarMode virDomainGraphicsSpicePlaybackCompression
-
- 17 7月, 2014 1 次提交
-
-
由 Michele Paolino 提交于
This patch adds support for the QEMU vhost-user feature to libvirt. vhost-user enables the communication between a QEMU virtual machine and other userspace process using the Virtio transport protocol. It uses a char dev (e.g. Unix socket) for the control plane, while the data plane based on shared memory. The XML looks like: <interface type='vhostuser'> <mac address='52:54:00:3b:83:1a'/> <source type='unix' path='/tmp/vhost.sock' mode='server'/> <model type='virtio'/> </interface> Signed-off-by: NMichele Paolino <m.paolino@virtualopensystems.com> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 14 7月, 2014 1 次提交
-
-
由 Eric Blake 提交于
While preparing to add a capability for active commit, I noticed that the existing code was abusing int for boolean values. * src/conf/capabilities.h (_virCapsGuestFeature, _virCapsHost) (virCapabilitiesNew, virCapabilitiesAddGuestFeature): Improve types. * src/conf/capabilities.c (virCapabilitiesNew) (virCapabilitiesAddGuestFeature): Adjust signature. * src/bhyve/bhyve_capabilities.c (virBhyveCapsBuild): Update clients. * src/esx/esx_driver.c (esxCapsInit): Likewise. * src/libxl/libxl_conf.c (libxlMakeCapabilities): Likewise. * src/lxc/lxc_conf.c (virLXCDriverCapsInit): Likewise. * src/openvz/openvz_conf.c (openvzCapsInit): Likewise. * src/parallels/parallels_driver.c (parallelsBuildCapabilities): Likewise. * src/phyp/phyp_driver.c (phypCapsInit): Likewise. * src/qemu/qemu_capabilities.c (virQEMUCapsInit) (virQEMUCapsInitGuestFromBinary): Likewise. * src/security/virt-aa-helper.c (get_definition): Likewise. * src/test/test_driver.c (testBuildCapabilities): Likewise. * src/uml/uml_conf.c (umlCapsInit): Likewise. * src/vbox/vbox_tmpl.c (vboxCapsInit): Likewise. * src/vmware/vmware_conf.c (vmwareCapsInit): Likewise. * src/xen/xen_hypervisor.c (xenHypervisorBuildCapabilities): Likewise. * src/xenapi/xenapi_driver.c (getCapsObject): Likewise. * tests/qemucaps2xmltest.c (testGetCaps): Likewise. * tests/testutils.c (virTestGenericCapsInit): Likewise. * tests/testutilslxc.c (testLXCCapsInit): Likewise. * tests/testutilsqemu.c (testQemuCapsInit): Likewise. * tests/testutilsxen.c (testXenCapsInit): Likewise. * tests/vircaps2xmltest.c (buildVirCapabilities): Likewise. * tests/vircapstest.c (buildNUMATopology): Likewise. * tests/vmx2xmltest.c (testCapsInit): Likewise. * tests/xml2vmxtest.c (testCapsInit): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 11 7月, 2014 1 次提交
-
-
由 Ian Campbell 提交于
This was converted to a typedef in 5a2bd4c9 "conf: more enum cleanups in "src/conf/domain_conf.h"" causing: libxl/libxl_conf.c: In function 'libxlDiskSetDiscard': libxl/libxl_conf.c:724:19: error: conversion to incomplete type Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
-
- 10 7月, 2014 1 次提交
-
-
由 Olaf Hering 提交于
Translate libvirt discard settings into libxl-4.5 discard settings. Signed-off-by: NOlaf Hering <olaf@aepfle.de>
-
- 08 7月, 2014 1 次提交
-
-
由 Peter Krempa 提交于
In the future we might need to track state of individual images. Move the readonly and shared flags to the virStorageSource struct so that we can keep them in a per-image basis.
-
- 27 6月, 2014 1 次提交
-
-
由 Jim Fehlig 提交于
libxl does not support save, restore, or migrate on all architectures, notably ARM. Detect whether libxl supports these operations using LIBXL_HAVE_NO_SUSPEND_RESUME. If not supported, drop advertisement of <migration_features>. Found by Ian Campbell while improving Xen's OSSTEST infrastructure http://lists.xen.org/archives/html/xen-devel/2014-06/msg02171.html
-
- 24 6月, 2014 1 次提交
-
-
由 Jim Fehlig 提交于
The libxl driver currently sets the disk backend to LIBXL_DISK_BACKEND_TAP when <driver name='file'> is specified in the <disk> config. qdisk should be prefered with this configuration, otherwise existing configuration such as the following, which worked with the old Xen driver, will not work with the libxl driver <disk type='file' device='cdrom'> <driver name='file'/> <source file='/path/to/some/iso'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> In addition, tap performs poorly compared to qdisk.
-
- 20 6月, 2014 2 次提交
-
-
由 Jim Fehlig 提交于
Generally, <interface> ... <script> is only supported for type='ethernet'. Due to the long and pervasive use of <interface type='bridge'> ... <script path='foo'/> </interface> in Xen domain configuration, it was agreed to allow the use of <script> with type='bridge' for backwards compatibility. See the following discussion thread http://www.redhat.com/archives/libvir-list/2013-April/msg00755.html This patch limits the use of <script> to interface types ethernet and bridge, raising an unsupported config error if <script> is specified for all other interface types. While at it, use VIR_ERR_CONFIG_UNSUPPORTED instead of VIR_ERR_INTERNAL_ERROR when reporting unsupported interface types.
-
由 Jim Fehlig 提交于
Add support for <interface type='network'> in the libxl driver.
-
- 19 6月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
There are two places where you'll find info on page sizes. The first one is under <cpu/> element, where all supported pages sizes are listed. Then the second one is under each <cell/> element which refers to concrete NUMA node. At this place, the size of page's pool is reported. So the capabilities XML looks something like this: <capabilities> <host> <uuid>01281cda-f352-cb11-a9db-e905fe22010c</uuid> <cpu> <arch>x86_64</arch> <model>Westmere</model> <vendor>Intel</vendor> <topology sockets='1' cores='1' threads='1'/> ... <pages unit='KiB' size='4'/> <pages unit='KiB' size='2048'/> <pages unit='KiB' size='1048576'/> </cpu> ... <topology> <cells num='4'> <cell id='0'> <memory unit='KiB'>4054408</memory> <pages unit='KiB' size='4'>1013602</pages> <pages unit='KiB' size='2048'>3</pages> <pages unit='KiB' size='1048576'>1</pages> <distances/> <cpus num='1'> <cpu id='0' socket_id='0' core_id='0' siblings='0'/> </cpus> </cell> <cell id='1'> <memory unit='KiB'>4071072</memory> <pages unit='KiB' size='4'>1017768</pages> <pages unit='KiB' size='2048'>3</pages> <pages unit='KiB' size='1048576'>1</pages> <distances/> <cpus num='1'> <cpu id='1' socket_id='0' core_id='0' siblings='1'/> </cpus> </cell> ... </cells> </topology> ... </host> <guest/> </capabilities> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 04 6月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
If user or management application wants to create a guest, it may be useful to know the cost of internode latencies before the guest resources are pinned. For example: <capabilities> <host> ... <topology> <cells num='2'> <cell id='0'> <memory unit='KiB'>4004132</memory> <distances> <sibling id='0' value='10'/> <sibling id='1' value='20'/> </distances> <cpus num='2'> <cpu id='0' socket_id='0' core_id='0' siblings='0'/> <cpu id='2' socket_id='0' core_id='2' siblings='2'/> </cpus> </cell> <cell id='1'> <memory unit='KiB'>4030064</memory> <distances> <sibling id='0' value='20'/> <sibling id='1' value='10'/> </distances> <cpus num='2'> <cpu id='1' socket_id='0' core_id='0' siblings='1'/> <cpu id='3' socket_id='0' core_id='2' siblings='3'/> </cpus> </cell> </cells> </topology> ... </host> ... </capabilities> We can see the distance from node1 to node0 is 20 and within nodes 10. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 03 6月, 2014 3 次提交
-
-
由 Daniel P. Berrange 提交于
To allow the test suite to creat the XML option object, move the virDomainXMLOptionNew call into a libxlCreateXMLConf method. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To make it easier to test, change libxlBuildDomainConfig so that it takes a virPortAllocatorPtr instead of the larger libxlDriverPrivatePtr object. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To make it easier to unit test, change libxlBuildDomainConfig so that it takes 'virDomainDefPtr' and 'libxl_ctx *' objects as separate parameters. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 13 5月, 2014 1 次提交
-
-
由 Chunyan Liu 提交于
A VIR_DOMAIN_NET_TYPE_HOSTDEV interface device is really a hostdev device, which is created by the libxl driver in libxlMakePCIList(). There is no need to create a libxl_device_nic for such hostdev devices, so skip interfaces of type VIR_DOMAIN_NET_TYPE_HOSTDEV in libxlMakeNicList(). Signed-off-by: NChunyan Liu <cyliu@suse.com>
-
- 08 4月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
Since it is an abbreviation, PCI should always be fully capitalized or full lower case, never Pci. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 03 4月, 2014 1 次提交
-
-
由 Stefan Bader 提交于
The XML config for a CDROM device can be without a source path, indicating that there is no media present. Without this change the libxl driver fails to start a guest in that case because the libxl library checks for the LIBXL_DISK_FORMAT_EMPTY format type and tries to stat the NULL pointer that gets passed on. > libxl: error: libxl_device.c:265:libxl__device_disk_set_backend: > Disk vdev=hdc failed to stat: (null): Bad address Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
-
- 26 3月, 2014 1 次提交
-
-
由 Stefan Bader 提交于
Commit d9f19c30 moved a lot of the configuration setup into libxlDriverConfigNew(). However that tries to create the libxl/libxl-driver.log before the libxl directory gets created in libxlStateInitialize(). This causes the daemon to fail on systems that have not had the directory created before. Move the code to create the libxl directory into libxlDriverConfigNew(). Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
-
- 25 3月, 2014 2 次提交
-
-
由 Ján Tomko 提交于
-
由 Eric Blake 提交于
Part of a series of cleanups to use new accessor methods. * src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors. * src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia) (libxlDomainAttachDeviceDiskLive): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 20 3月, 2014 1 次提交
-
-
由 Jim Fehlig 提交于
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf for use by other libxl modules. For consistency, rename to libxlDriverNodeGetInfo. Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 19 3月, 2014 1 次提交
-
-
由 Jim Fehlig 提交于
libxl uses the libxl_vnc_info and libxl_sdl_info fields from the hvm union in libxl_domain_build_info struct when generating QEMU args for VNC or SDL. These fields were left unset by the libxl driver, causing libxl to ignore any user settings. E.g. with <graphics type='vnc' port='5950'/> port would be ignored and QEMU would instead be invoked with -vnc 127.0.0.1:0,to=99 Unlike the libxl_domain_config struct, the libxl_domain_build_info contains only a single libxl_vnc_info and libxl_sdl_info, so populate these fields from the first vfb in libxl_domain_config->vfbs. Signed-off-by: NJim Fehlig <jfehlig@suse.com> Signed-off-by: NDavid Kiarie <davidkiarie4@gmail.com>
-
- 18 3月, 2014 1 次提交
-
-
由 Daniel P. Berrange 提交于
Any source file which calls the logging APIs now needs to have a VIR_LOG_INIT("source.name") declaration at the start of the file. This provides a static variable of the virLogSource type. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 13 3月, 2014 1 次提交
-
-
由 Chunyan Liu 提交于
Add pci passthrough to libxl driver, support attach-device, detach-device and start a vm with pci hostdev specified.
-
- 26 2月, 2014 1 次提交
-
-
由 Ian Campbell 提交于
Only tested on v7 but the v8 equivalent seems pretty obvious. XEN_CAP_REGEX already accepts more than it should (e.g. x86_64p or x86_32be) but I have stuck with the existing pattern. With this I can create a guest from: <domain type='xen'> <name>libvirt-test</name> <uuid>6343998e-9eda-11e3-98f6-77252a7d02f3</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='armv7l' machine='xenpv'>linux</type> <kernel>/boot/vmlinuz-arm-native</kernel> <cmdline>console=hvc0 earlyprintk debug root=/dev/xvda1</cmdline> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <disk type='block' device='disk'> <source dev='/dev/marilith-n0/debian-disk'/> <target dev='xvda1'/> </disk> <interface type='bridge'> <mac address='8e:a7:8e:3c:f4:f6'/> <source bridge='xenbr0'/> </interface> </devices> </domain> Using virsh create and I can destroy it too. Currently virsh console fails with: Connected to domain libvirt-test Escape character is ^] error: internal error: cannot find character device <null> I haven't investigated yet. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 25 2月, 2014 1 次提交
-
-
由 Jim Fehlig 提交于
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
-
- 09 1月, 2014 1 次提交
-
-
由 Stefan Bader 提交于
This basically reverts commit ba64b971 "libxl: Allow libxl to set NIC devid". However assigning devid's before calling libxlMakeNic does not work as that is calling libxl_device_nic_init which sets it back to -1. Right now auto-assignment only works in the hotplug case. But even if that would be fixed at some point (if that is possible at all), this would add a weird dependency between Xen and libvirt versions. The change here should accept any auto-assignment that makes it into libxl_device_nic_init. My understanding is that a caller always is allowed to make the devid choice itself. And assuming libxlMakeNicList is only used on domain creation, a sequential numbering should be ok. Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
-
- 07 1月, 2014 1 次提交
-
-
由 Jim Fehlig 提交于
As pointed out by the Xen folks [1], HVM nics should always be set to type LIBXL_NIC_TYPE_VIF_IOEMU unless the user explicity requests LIBXL_NIC_TYPE_VIF via model='netfront'. The current logic in libxlMakeNic() only sets the nictype to LIBXL_NIC_TYPE_VIF_IOEMU if a model is specified that is not 'netfront', which breaks PXE booting configurations where no model is specified (i.e. use the hypervisor default). Reported-by: NStefan Bader <stefan.bader@canonical.com> [1] https://www.redhat.com/archives/libvir-list/2013-December/msg01156.html
-
- 18 11月, 2013 1 次提交
-
-
由 Ján Tomko 提交于
Report the error in virPortAllocatorAcquire instead of doing it in every caller. The error contains the port range name instead of the intended use for the port, e.g.: Unable to find an unused port in range 'display' (65534-65535) instead of: Unable to find an unused port for SPICE This also adds error reporting when the QEMU driver could not find an unused port for VNC, VNC WebSockets or NBD migration.
-
- 08 11月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Currently we were storing domain feature flags in a bit field as the they were either enabled or disabled. New features such as paravirtual spinlocks however can be tri-state as the default option may depend on hypervisor version. To allow storing tri-state feature state in the same place instead of having to declare dedicated variables for each feature this patch refactors the bit field to an array.
-
- 06 9月, 2013 1 次提交
-
-
由 Jim Fehlig 提交于
The regular expression used to determine guest capabilities was compiled in libxlCapsInitHost() but used in libxlCapsInitGuests(). Move compilation to libxlCapsInitGuests() where it is used, and free the compiled regex after use. Ensure not to free the regex if compilation fails.
-
- 05 9月, 2013 1 次提交
-
-
由 Jim Fehlig 提交于
Change libxlGetAutoballoonConf() function to return an int for success/failure, and fail if regcomp fails.
-
- 04 9月, 2013 6 次提交
-
-
由 Jim Fehlig 提交于
Change source file copyright notice to prevailing libvirt style.
-
由 Jim Fehlig 提交于
Now that most fields of libxlDriverPrivate struct are immutable or self-locking, there is no need to acquire the driver lock in much of the libxl driver.
-
由 Jim Fehlig 提交于
The libxlDriverPrivate struct contains an variety of data with varying access needs. Similar to the QEMU and LXC drivers, move all the static config data into a dedicated libxlDriverConfig object. The only locking requirement is to hold the driver lock while obtaining an instance of libxlDriverConfig. Once a reference is held on the config object, it can be used completely lockless since it is immutable.
-
由 Jim Fehlig 提交于
libxlMakeDomCreateInfo() uses the driver-wide libxl ctx when it would be more appropriate to use the per-domain ctx associated with the domain. Switch to using the per-domain libxl ctx.
-
由 Jim Fehlig 提交于
libxl version info is static data as far as the libxl driver is concerned, so retrieve this info when the driver is initialized and stash it in the libxlDriverPrivate object. Subsequently use the stashed info instead of repeatedly calling libxl_get_version_info().
-
由 Jim Fehlig 提交于
Create libxl_domain.[ch] and move all functions operating on libxlDomainObjPrivate to these files. This will be useful for future patches that e.g. add job support for libxlDomainObjPrivate.
-