- 17 4月, 2019 5 次提交
-
-
由 Cole Robinson 提交于
Convert these test cases to use DO_TEST_CAPS_LATEST * genid * genid-auto This ensures the test infrastructure is working as expected for a test case with explicit -active and -inactive XML test data Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Convert these test cases to use DO_TEST_CAPS_LATEST * os-firmware-bios * os-firmware-efi * os-firmware-efi-secboot Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Convert these test cases to use DO_TEST_CAPS_LATEST * virtio-transitional * virtio-non-transitional Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Add DO_TEST_CAPS* macros, lifted from qemuxml2argvtest. Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Use the same pattern that is used in qemuxml2argvtest, setting the name in a static testQemuInfo instance inside the test macros Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 11 4月, 2019 6 次提交
-
-
由 Cole Robinson 提交于
Make all users of GIC_X use ARG_GIC explicitly, and drop the required gic parameter from DO_TEST_FULL Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
No functional change, just replacing the old custom infrastructure Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
The qemuxml2xml testInfo is now just a subset of testQemuInfo, so it's a drop in replacement Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Reuse info->outfile for it. This requires us to set paths before each virTestRun invocation Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Just renamed from existing inName and outActiveName Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
These will need to be separate to share testInfo with qemuxml2argv Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 03 4月, 2019 4 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1693066 Up until memfd introduction (in 24b74d18) we did not need to know @pagesize because qemuGetDomainHupageMemPath() could deal with it being zero (value of zero means use the default hugetlbfs mount). But since for memfd we are not passing a path to hugetlbfs mount rather the page size value we need to know its value upfront. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Michal Privoznik 提交于
Somehow, these were not tested. Use symlinks to point expected output back to the input. This way we can also fix some discrepancies in the input XMLs. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Michal Privoznik 提交于
The current location looks very arbitrary. Move it to the end of the mymain() function so it is less confusing. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Peter Krempa 提交于
Block job related data will be stored in a has table and formatted into the status XML. Use the mock to guarantee stable tests. Signed-off-by: NPeter Krempa <pkrempa@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 12 3月, 2019 2 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1564270 Now that everything is prepared for qemu driver we can enable parser feature to allow users define such domains. At the same time, introduce bunch of tests to test the feature. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
-
由 Andrea Bolognani 提交于
In qemuxml2xmltest, both activeVcpus and blockjobs members of the testInfo struct have been entirely unused ever since commit d1a7fc8b. Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
- 05 3月, 2019 6 次提交
-
-
由 Andrea Bolognani 提交于
There are a few cases where we are using either WHEN_ACTIVE or WHEN_INACTIVE even though WHEN_BOTH would work perfectly fine: for those, start using the simpler DO_TEST() macro. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
由 Cole Robinson 提交于
Add <controller type='scsi' model handling for virtio transitional devices. Ex: <controller type='scsi' model='virtio-transitional'/> * "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional" The naming here doesn't match the pre-existing model=virtio-scsi. The prescence of '-scsi' there seems kind of redundant as we have type='scsi' already, so I decided to follow the pattern of other patches and use virtio-transitional etc. Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
<input> devices lack the model= attribute which is used by most other device types. To eventually support virtio-input-host-pci-{non-}traditional in qemu, let's add a standard model= attribute. This just adds the domain_conf wiring Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Add <vsock> model handling for virtio transitional devices. Ex: <vsock model='virtio-transitional'> ... </vsock> * "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional" * "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional" Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
Add new <rng> model values for virtio transitional devices. Ex: <rng model='virtio-transitional'> ... </rng> * "virtio-transitional" maps to qemu "virtio-rng-pci-transitional" * "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional" Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
由 Cole Robinson 提交于
<disk> devices lack the model= attribute which is used by most other device types. bus= mostly acts as one, but it serves other purposes too like determing what target= prefix to use, and for matching against controller type= values. Extending bus= to handle additional virtio transitional devices will complicate apps lives, and it isn't a clean mapping anyways. So let's bite the bullet and add a new <disk model=X/> attribute, and wire up common handling for virtio and virtio-{non-}transitional Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 08 2月, 2019 12 次提交
-
-
由 Peter Krempa 提交于
Add full and empty cdroms on 'usb' and 'sd' bus to have test coverage. Note that this does not guarantee that qemu will accept them. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
The split of scsi-disk into the two separate devices was introduced by qemu commit b443ae67 released in qemu v0.15. All changes to test files are not really related to disk testing thanks to previous refactors. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
As we support multiple scsi controllers there's no need to have a special test for this controller. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
As we support multiple scsi controllers there's no need to have a special test for this controller. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
As we support multiple scsi controllers there's no need to have a special test for this controller. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
Drop the 'device' suffix which is quite pointless. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
We don't need separate files for this test. Also modernize it in the process. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
We don't need separate files for this test. Also modernize it in the process. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
We don't need separate files for this test. Also modernize it in the process. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
We don't need separate files for this test. Also modernize it in the process. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
Now that we have a specific test for testing the 'virtio-scsi' controller and other tests which test a combination of scsi and non-scsi devices this test no longer makes sense. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
由 Peter Krempa 提交于
Add a file to aggregate testing for 'virtio-scsi' based on the modern framework. Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
-
- 01 2月, 2019 1 次提交
-
-
由 Andrea Bolognani 提交于
This shows users can now use PCI for RISC-V guests, as long as they opt into it by manually assigning addresses. Signed-off-by: NAndrea Bolognani <abologna@redhat.com> Reviewed-by: NJán Tomko <jtomko@redhat.com>
-
- 25 1月, 2019 1 次提交
-
-
由 Cole Robinson 提交于
Move the rng->model == VIRTIO check to parse time. This also allows us to remove similar checks throughout the qemu driver Reviewed-by: NAndrea Bolognani <abologna@redhat.com> Signed-off-by: NCole Robinson <crobinso@redhat.com>
-
- 02 1月, 2019 3 次提交
-
-
由 Luyao Zhong 提交于
The 'readonly' option allows users to mark vNVDIMM read-only: <devices> ... <memory model='nvdimm' access='shared'> <source> <path>/dev/dax0.0</path> </source> <target> <size unit='MiB'>4094</size> <node>0</node> <label> <size unit='MiB'>2</size> </label> <readonly/> </target> </memory> ... </devices> Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Luyao Zhong 提交于
The 'pmem' option allows users to specify whether the backend storage of memory-backend-file is a real persistent memory: <devices> ... <memory model='nvdimm' access='shared'> <source> <path>/dev/dax0.0</path> <pmem/> </source> <target> <size unit='MiB'>4094</size> <node>0</node> <label> <size unit='MiB'>2</size> </label> </target> </memory> ... </devices> Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Luyao Zhong 提交于
NVDIMM emulation will mmap the backend file, it uses host pagesize as the alignment of mapping address before, but some backends may require alignments different from the pagesize. So the 'alignsize' option is introduced to allow specification of the proper alignment: <devices> ... <memory model='nvdimm' access='shared'> <source> <path>/dev/dax0.0</path> <alignsize unit='MiB'>2</alignsize> </source> <target> <size unit='MiB'>4094</size> <node>0</node> <label> <size unit='MiB'>2</size> </label> </target> </memory> ... </devices> Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-