libvirt.spec.in 43.3 KB
Newer Older
1 2
# -*- rpm-spec -*-

3 4 5 6 7 8 9 10
# If neither fedora nor rhel was defined, try to guess them from %{dist}
%if !0%{?rhel} && !0%{?fedora}
%{expand:%(echo "%{?dist}" | \
  sed -ne 's/^\.el\([0-9]\+\).*/%%define rhel \1/p')}
%{expand:%(echo "%{?dist}" | \
  sed -ne 's/^\.fc\?\([0-9]\+\).*/%%define fedora \1/p')}
%endif

11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
# A client only build will create a libvirt.so only containing
# the generic RPC driver, and test driver and no libvirtd
# Default to a full server + client build
%define client_only        0

# Now turn off server build in certain cases

# RHEL-5 builds are client-only for s390, ppc
%if 0%{?rhel} == 5
%ifnarch i386 i586 i686 x86_64 ia64
%define client_only        1
%endif
%endif

# Disable all server side drivers if client only build requested
%if %{client_only}
%define server_drivers     0
%else
%define server_drivers     1
%endif


33
# Now set the defaults for all the important features, independent
34 35 36 37 38 39
# of any particular OS

# First the daemon itself
%define with_libvirtd      0%{!?_without_libvirtd:%{server_drivers}}
%define with_avahi         0%{!?_without_avahi:%{server_drivers}}

40
# Then the hypervisor drivers that run on local host
41 42 43 44 45 46
%define with_xen           0%{!?_without_xen:%{server_drivers}}
%define with_qemu          0%{!?_without_qemu:%{server_drivers}}
%define with_openvz        0%{!?_without_openvz:%{server_drivers}}
%define with_lxc           0%{!?_without_lxc:%{server_drivers}}
%define with_vbox          0%{!?_without_vbox:%{server_drivers}}
%define with_uml           0%{!?_without_uml:%{server_drivers}}
J
Jim Fehlig 已提交
47
%define with_libxl         0%{!?_without_libxl:%{server_drivers}}
48
%define with_vmware        0%{!?_without_vmware:%{server_drivers}}
49 50 51 52

# Then the hypervisor drivers that talk a native remote protocol
%define with_phyp          0%{!?_without_phyp:1}
%define with_esx           0%{!?_without_esx:1}
53
%define with_xenapi        0%{!?_without_xenapi:1}
54 55 56 57 58 59 60 61 62 63 64 65

# Then the secondary host drivers
%define with_network       0%{!?_without_network:%{server_drivers}}
%define with_storage_fs    0%{!?_without_storage_fs:%{server_drivers}}
%define with_storage_lvm   0%{!?_without_storage_lvm:%{server_drivers}}
%define with_storage_iscsi 0%{!?_without_storage_iscsi:%{server_drivers}}
%define with_storage_disk  0%{!?_without_storage_disk:%{server_drivers}}
%define with_storage_mpath 0%{!?_without_storage_mpath:%{server_drivers}}
%define with_numactl       0%{!?_without_numactl:%{server_drivers}}
%define with_selinux       0%{!?_without_selinux:%{server_drivers}}

# A few optional bits off by default, we enable later
66
%define with_polkit        0%{!?_without_polkit:0}
D
Daniel P. Berrange 已提交
67
%define with_capng         0%{!?_without_capng:0}
68
%define with_netcf         0%{!?_without_netcf:0}
69 70
%define with_udev          0%{!?_without_udev:0}
%define with_hal           0%{!?_without_hal:0}
71
%define with_yajl          0%{!?_without_yajl:0}
72
%define with_nwfilter      0%{!?_without_nwfilter:0}
73
%define with_libpcap       0%{!?_without_libpcap:0}
74
%define with_macvtap       0%{!?_without_macvtap:0}
J
Jiri Denemark 已提交
75
%define with_libnl         0%{!?_without_libnl:0}
76
%define with_audit         0%{!?_without_audit:0}
77
%define with_dtrace        0%{!?_without_dtrace:0}
78
%define with_cgconfig      0%{!?_without_cgconfig:0}
79
%define with_sanlock       0%{!?_without_sanlock:0}
80

81 82 83 84 85 86 87
# Non-server/HV driver defaults which are always enabled
%define with_python        0%{!?_without_python:1}
%define with_sasl          0%{!?_without_sasl:1}


# Finally set the OS / architecture specific special cases

88
# Xen is available only on i386 x86_64 ia64
89
%ifnarch i386 i586 i686 x86_64 ia64
90 91 92
%define with_xen 0
%endif

D
Daniel P. Berrange 已提交
93 94 95 96
# Numactl is not available on s390[x]
%ifarch s390 s390x
%define with_numactl 0
%endif
97

98
# RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
J
Jim Fehlig 已提交
99
# VMWare, libxenserver (xenapi), or libxenlight (Xen 4.1 and newer)
100 101 102 103 104
%if 0%{?rhel}
%define with_openvz 0
%define with_vbox 0
%define with_uml 0
%define with_phyp 0
105
%define with_vmware 0
106
%define with_xenapi 0
J
Jim Fehlig 已提交
107
%define with_libxl 0
108 109 110 111 112 113 114 115 116 117
%endif

# RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC
%if 0%{?rhel} == 5
%ifnarch x86_64
%define with_qemu 0
%endif
%define with_lxc 0
%endif

118 119
# RHEL-6 has restricted QEMU to x86_64 only, stopped including Xen
# on all archs. Other archs all have LXC available though
120
%if 0%{?rhel} >= 6
121 122 123
%ifnarch x86_64
%define with_qemu 0
%endif
124 125 126 127
%define with_xen 0
%endif

# Fedora doesn't have any QEMU on ppc64 - only ppc
128
%if 0%{?fedora}
129
%ifarch ppc64
130 131
%define with_qemu 0
%endif
132 133
%endif

134 135 136 137 138
# Fedora doesn't have new enough Xen for libxl until F16
%if 0%{?fedora} < 16
%define with_libxl 0
%endif

139
# PolicyKit was introduced in Fedora 8 / RHEL-6 or newer
140
%if 0%{?fedora} >= 8 || 0%{?rhel} >= 6
141
%define with_polkit    0%{!?_without_polkit:1}
142
%endif
143

144 145
# libcapng is used to manage capabilities in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
D
Daniel P. Berrange 已提交
146 147 148
%define with_capng     0%{!?_without_capng:1}
%endif

149 150 151
# netcf is used to manage network interfaces in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define with_netcf     0%{!?_without_netcf:%{server_drivers}}
M
Mark McLoughlin 已提交
152 153
%endif

154 155 156 157 158 159 160
# udev is used to manage host devices in Fedora 12 / RHEL-6 or newer
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%define with_udev     0%{!?_without_udev:%{server_drivers}}
%else
%define with_hal       0%{!?_without_hal:%{server_drivers}}
%endif

161 162 163 164 165
# Enable yajl library for JSON mode with QEMU
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
%define with_yajl     0%{!?_without_yajl:%{server_drivers}}
%endif

166 167 168 169 170
# Enable sanlock library for lock management with QEMU
%if 0%{?fedora} >= 15 || 0%{?rhel} >= 6
%define with_sanlock  0%{!?_without_sanlock:%{server_drivers}}
%endif

171 172
# Enable libpcap library
%if %{with_qemu}
173
%define with_nwfilter 0%{!?_without_nwfilter:%{server_drivers}}
174
%define with_libpcap  0%{!?_without_libpcap:%{server_drivers}}
175 176 177 178 179
%define with_macvtap  0%{!?_without_macvtap:%{server_drivers}}
%endif

%if %{with_macvtap}
%define with_libnl 1
180 181
%endif

182 183 184 185
%if 0%{?fedora} >= 11 || 0%{?rhel} >= 5
%define with_audit    0%{!?_without_audit:1}
%endif

186 187 188 189
%if 0%{?fedora} >= 13 || 0%{?rhel} >= 6
%define with_dtrace 1
%endif

190 191 192 193 194 195 196
# Pull in cgroups config system
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
%if %{with_qemu} || %{with_lxc}
%define with_cgconfig 0%{!?_without_cgconfig:1}
%endif
%endif

197 198
# Force QEMU to run as non-root
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
199 200 201 202 203 204 205
%define qemu_user  qemu
%define qemu_group  qemu
%else
%define qemu_user  root
%define qemu_group  root
%endif

206 207 208 209

# The RHEL-5 Xen package has some feature backports. This
# flag is set to enable use of those special bits on RHEL-5
%if 0%{?rhel} == 5
210
%define with_rhel5  1
211 212
%else
%define with_rhel5  0
213 214 215
%endif


216 217 218 219 220 221
# there's no use compiling the network driver without
# the libvirt daemon
%if ! %{with_libvirtd}
%define with_network 0
%endif

C
Cole Robinson 已提交
222
Summary: Library providing a simple virtualization API
223
Name: libvirt
224
Version: @VERSION@
225
Release: 1%{?dist}%{?extra_release}
226
License: LGPLv2+
227
Group: Development/Libraries
228
Source: http://libvirt.org/sources/libvirt-%{version}.tar.gz
229
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
230
URL: http://libvirt.org/
231 232 233

# All runtime requirements for the libvirt package (runtime requrements
# for subpackages are listed later in those subpackages)
234 235

# The client side, i.e. shared libs and virsh are in a subpackage
236
Requires: %{name}-client = %{version}-%{release}
237

238 239 240
# Used by many of the drivers, so turn it on whenever the
# daemon is present
%if %{with_libvirtd}
241
Requires: bridge-utils
E
Eric Blake 已提交
242 243 244 245
# for modprobe of pci devices
Requires: module-init-tools
# for /sbin/ip
Requires: iproute
246 247
%endif
%if %{with_network}
248
Requires: dnsmasq >= 2.41
E
Eric Blake 已提交
249 250 251
Requires: radvd
%endif
%if %{with_network} || %{with_nwfilter}
252
Requires: iptables
E
Eric Blake 已提交
253
Requires: iptables-ipv6
254
%endif
255 256 257
%if %{with_nwfilter}
Requires: ebtables
%endif
258
# needed for device enumeration
259
%if %{with_hal}
260
Requires: hal
261
%endif
262 263 264
%if %{with_udev}
Requires: udev >= 145
%endif
265
%if %{with_polkit}
266
%if 0%{?fedora} >= 12 || 0%{?rhel} >=6
267 268
Requires: polkit >= 0.93
%else
269 270
Requires: PolicyKit >= 0.6
%endif
271
%endif
272
%if %{with_storage_fs}
273
Requires: nfs-utils
274
# For glusterfs
275
%if 0%{?fedora} >= 11
276
Requires: glusterfs-client >= 2.0.1
277
%endif
278
%endif
279 280 281
%if %{with_qemu}
# From QEMU RPMs
Requires: /usr/bin/qemu-img
282 283 284
# For image compression
Requires: gzip
Requires: bzip2
285
Requires: lzop
286
Requires: xz
287
%else
288
%if %{with_xen}
289 290 291
# From Xen RPMs
Requires: /usr/sbin/qcow-create
%endif
292
%endif
293
%if %{with_storage_lvm}
294 295
# For LVM drivers
Requires: lvm2
296 297
%endif
%if %{with_storage_iscsi}
298 299
# For ISCSI driver
Requires: iscsi-initiator-utils
300 301
%endif
%if %{with_storage_disk}
302 303
# For disk driver
Requires: parted
304
Requires: device-mapper
305
%endif
306 307 308 309
%if %{with_storage_mpath}
# For multipath support
Requires: device-mapper
%endif
310 311 312
%if %{with_cgconfig}
Requires: libcgroup
%endif
313 314 315 316

# All build-time requirements
BuildRequires: python-devel

317
%if %{with_xen}
318
BuildRequires: xen-devel
319
%endif
320
BuildRequires: libxml2-devel
321
BuildRequires: xhtml1-dtds
E
Eric Blake 已提交
322
BuildRequires: libxslt
323
BuildRequires: readline-devel
324
BuildRequires: ncurses-devel
325
BuildRequires: gettext
R
Richard W.M. Jones 已提交
326
BuildRequires: gnutls-devel
E
Eric Blake 已提交
327 328 329 330
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
# for augparse, optionally used in testing
BuildRequires: augeas
%endif
331
%if %{with_hal}
332
BuildRequires: hal-devel
333
%endif
334 335 336 337
%if %{with_udev}
BuildRequires: libudev-devel >= 145
BuildRequires: libpciaccess-devel >= 0.10.9
%endif
338 339 340
%if %{with_yajl}
BuildRequires: yajl-devel
%endif
341 342 343
%if %{with_sanlock}
BuildRequires: sanlock-devel
%endif
344 345 346
%if %{with_libpcap}
BuildRequires: libpcap-devel
%endif
347 348 349
%if %{with_libnl}
BuildRequires: libnl-devel
%endif
350
%if %{with_avahi}
351
BuildRequires: avahi-devel
352
%endif
353
%if %{with_selinux}
354
BuildRequires: libselinux-devel
355 356
%endif
%if %{with_network}
357
BuildRequires: dnsmasq >= 2.41
E
Eric Blake 已提交
358 359 360 361 362 363
BuildRequires: iptables
BuildRequires: iptables-ipv6
BuildRequires: radvd
%endif
%if %{with_nwfilter}
BuildRequires: ebtables
364
%endif
365
BuildRequires: bridge-utils
E
Eric Blake 已提交
366
BuildRequires: module-init-tools
367
%if %{with_sasl}
368
BuildRequires: cyrus-sasl-devel
369
%endif
370
%if %{with_polkit}
371
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
372 373 374
# Only need the binary, not -devel
BuildRequires: polkit >= 0.93
%else
375 376
BuildRequires: PolicyKit-devel >= 0.6
%endif
377
%endif
378
%if %{with_storage_fs}
379 380
# For mount/umount in FS driver
BuildRequires: util-linux
381
%endif
382 383 384 385
%if %{with_qemu}
# From QEMU RPMs
BuildRequires: /usr/bin/qemu-img
%else
386
%if %{with_xen}
387 388 389
# From Xen RPMs
BuildRequires: /usr/sbin/qcow-create
%endif
390
%endif
391
%if %{with_storage_lvm}
392 393
# For LVM drivers
BuildRequires: lvm2
394 395
%endif
%if %{with_storage_iscsi}
396 397
# For ISCSI driver
BuildRequires: iscsi-initiator-utils
398 399
%endif
%if %{with_storage_disk}
400 401
# For disk driver
BuildRequires: parted-devel
402 403 404 405
%if 0%{?rhel} == 5
# Broken RHEL-5 parted RPM is missing a dep
BuildRequires: e2fsprogs-devel
%endif
406
%endif
407 408
%if %{with_storage_mpath}
# For Multipath support
409 410 411 412
%if 0%{?rhel} == 5
# Broken RHEL-5 packaging has header files in main RPM :-(
BuildRequires: device-mapper
%else
413 414
BuildRequires: device-mapper-devel
%endif
415
%endif
416
%if %{with_numactl}
417 418
# For QEMU/LXC numa info
BuildRequires: numactl-devel
419
%endif
D
Daniel P. Berrange 已提交
420
%if %{with_capng}
421
BuildRequires: libcap-ng-devel >= 0.5.0
D
Daniel P. Berrange 已提交
422
%endif
423
%if %{with_phyp}
D
Daniel Veillard 已提交
424
BuildRequires: libssh2-devel
425
%endif
M
Mark McLoughlin 已提交
426
%if %{with_netcf}
427 428 429
%if 0%{?fedora} >= 16 || 0%{?rhel} >= 6
BuildRequires: netcf-devel >= 0.1.8
%else
D
Daniel Veillard 已提交
430
BuildRequires: netcf-devel >= 0.1.4
M
Mark McLoughlin 已提交
431
%endif
432
%endif
433
%if %{with_esx}
E
Eric Blake 已提交
434
%if 0%{?fedora} >= 9 || 0%{?rhel} >= 6
435
BuildRequires: libcurl-devel
E
Eric Blake 已提交
436 437 438
%else
BuildRequires: curl-devel
%endif
439
%endif
440 441 442
%if %{with_audit}
BuildRequires: audit-libs-devel
%endif
D
Daniel Veillard 已提交
443 444 445 446 447
%if %{with_dtrace}
# we need /usr/sbin/dtrace
BuildRequires: systemtap-sdt-devel
%endif

448 449 450 451 452 453
%if %{with_storage_fs}
# For mount/umount in FS driver
BuildRequires: util-linux
# For showmount in FS driver (netfs discovery)
BuildRequires: nfs-utils
%endif
454 455 456

# Fedora build root suckage
BuildRequires: gawk
457 458

%description
459
Libvirt is a C toolkit to interact with the virtualization capabilities
460 461 462 463
of recent versions of Linux (and other OSes). The main package includes
the libvirtd server exporting the virtualization support.

%package client
464
Summary: Client side library and utilities of the libvirt library
465 466 467 468 469 470
Group: Development/Libraries
Requires: readline
Requires: ncurses
# So remote clients can access libvirt over SSH tunnel
# (client invokes 'nc' against the UNIX socket on the server)
Requires: nc
O
Osier Yang 已提交
471 472
# Needed by libvirt-guests init script.
Requires: gettext
473 474
# Needed by virt-pki-validate script.
Requires: gnutls-utils
475 476 477 478 479 480 481 482 483 484
%if %{with_sasl}
Requires: cyrus-sasl
# Not technically required, but makes 'out-of-box' config
# work correctly & doesn't have onerous dependencies
Requires: cyrus-sasl-md5
%endif

%description client
Shared libraries and client binaries needed to access to the
virtualization capabilities of recent versions of Linux (and other OSes).
485 486

%package devel
487
Summary: Libraries, includes, etc. to compile with the libvirt library
488
Group: Development/Libraries
489
Requires: %{name}-client = %{version}-%{release}
490
Requires: pkgconfig
491 492 493
%if %{with_xen}
Requires: xen-devel
%endif
494 495

%description devel
496
Includes and documentations for the C library providing an API to use
497
the virtualization capabilities of recent versions of Linux (and other OSes).
498

499 500 501 502 503 504 505 506 507 508 509 510
%if %{with_sanlock}
%package lock-sanlock
Summary: Sanlock lock manager plugin for QEMU driver
Group: Development/Libraries
Requires: sanlock
Requires: %{name} = %{version}-%{release}

%description lock-sanlock
Includes the Sanlock lock manager plugin for the QEMU
driver
%endif

511
%if %{with_python}
512
%package python
513
Summary: Python bindings for the libvirt library
514
Group: Development/Libraries
515
Requires: %{name}-client = %{version}-%{release}
516 517

%description python
518
The libvirt-python package contains a module that permits applications
519
written in the Python programming language to use the interface
520
supplied by the libvirt library to use the virtualization capabilities
521
of recent versions of Linux (and other OSes).
522
%endif
523

524 525 526 527
%prep
%setup -q

%build
528 529 530 531 532 533 534 535
%if ! %{with_xen}
%define _without_xen --without-xen
%endif

%if ! %{with_qemu}
%define _without_qemu --without-qemu
%endif

536 537 538 539 540 541 542 543
%if ! %{with_openvz}
%define _without_openvz --without-openvz
%endif

%if ! %{with_lxc}
%define _without_lxc --without-lxc
%endif

M
Mark McLoughlin 已提交
544 545 546 547
%if ! %{with_vbox}
%define _without_vbox --without-vbox
%endif

548 549 550 551
%if ! %{with_xenapi}
%define _without_xenapi --without-xenapi
%endif

J
Jim Fehlig 已提交
552 553 554 555
%if ! %{with_libxl}
%define _without_libxl --without-libxl
%endif

556 557 558 559 560 561 562 563
%if ! %{with_sasl}
%define _without_sasl --without-sasl
%endif

%if ! %{with_avahi}
%define _without_avahi --without-avahi
%endif

564 565 566 567
%if ! %{with_phyp}
%define _without_phyp --without-phyp
%endif

568 569 570 571
%if ! %{with_esx}
%define _without_esx --without-esx
%endif

572 573 574 575
%if ! %{with_vmware}
%define _without_vmware --without-vmware
%endif

576 577 578 579 580 581 582 583 584 585 586 587
%if ! %{with_polkit}
%define _without_polkit --without-polkit
%endif

%if ! %{with_python}
%define _without_python --without-python
%endif

%if ! %{with_libvirtd}
%define _without_libvirtd --without-libvirtd
%endif

588 589 590 591
%if ! %{with_uml}
%define _without_uml --without-uml
%endif

592 593 594 595
%if %{with_rhel5}
%define _with_rhel5_api --with-rhel5-api
%endif

596 597 598 599
%if ! %{with_network}
%define _without_network --without-network
%endif

600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615
%if ! %{with_storage_fs}
%define _without_storage_fs --without-storage-fs
%endif

%if ! %{with_storage_lvm}
%define _without_storage_lvm --without-storage-lvm
%endif

%if ! %{with_storage_iscsi}
%define _without_storage_iscsi --without-storage-iscsi
%endif

%if ! %{with_storage_disk}
%define _without_storage_disk --without-storage-disk
%endif

616 617 618 619
%if ! %{with_storage_mpath}
%define _without_storage_mpath --without-storage-mpath
%endif

620 621 622 623
%if ! %{with_numactl}
%define _without_numactl --without-numactl
%endif

624 625 626 627
%if ! %{with_capng}
%define _without_capng --without-capng
%endif

M
Mark McLoughlin 已提交
628 629 630 631
%if ! %{with_netcf}
%define _without_netcf --without-netcf
%endif

632 633 634 635 636 637 638 639
%if ! %{with_selinux}
%define _without_selinux --without-selinux
%endif

%if ! %{with_hal}
%define _without_hal --without-hal
%endif

640 641 642 643
%if ! %{with_udev}
%define _without_udev --without-udev
%endif

644 645 646 647
%if ! %{with_yajl}
%define _without_yajl --without-yajl
%endif

648 649 650 651
%if ! %{with_sanlock}
%define _without_sanlock --without-sanlock
%endif

652 653 654 655
%if ! %{with_libpcap}
%define _without_libpcap --without-libpcap
%endif

656 657 658 659
%if ! %{with_macvtap}
%define _without_macvtap --without-macvtap
%endif

660 661 662 663
%if ! %{with_audit}
%define _without_audit --without-audit
%endif

664 665 666 667
%if ! %{with_dtrace}
%define _without_dtrace --without-dtrace
%endif

668 669 670 671 672 673 674
%define when  %(date +"%%F-%%T")
%define where %(hostname)
%define who   %{?packager}%{!?packager:Unknown}
%define with_packager --with-packager="%{who}, %{when}, %{where}"
%define with_packager_version --with-packager-version="%{release}"


675 676
%configure %{?_without_xen} \
           %{?_without_qemu} \
677 678
           %{?_without_openvz} \
           %{?_without_lxc} \
M
Mark McLoughlin 已提交
679
           %{?_without_vbox} \
680
           %{?_without_xenapi} \
681 682 683 684 685
           %{?_without_sasl} \
           %{?_without_avahi} \
           %{?_without_polkit} \
           %{?_without_python} \
           %{?_without_libvirtd} \
686
           %{?_without_uml} \
687
           %{?_without_one} \
688
           %{?_without_phyp} \
689
           %{?_without_esx} \
690
           %{?_without_vmware} \
691
           %{?_without_network} \
692
           %{?_with_rhel5_api} \
693 694 695 696
           %{?_without_storage_fs} \
           %{?_without_storage_lvm} \
           %{?_without_storage_iscsi} \
           %{?_without_storage_disk} \
697
           %{?_without_storage_mpath} \
698
           %{?_without_numactl} \
699
           %{?_without_capng} \
M
Mark McLoughlin 已提交
700
           %{?_without_netcf} \
701 702
           %{?_without_selinux} \
           %{?_without_hal} \
703
           %{?_without_udev} \
704
           %{?_without_yajl} \
705
           %{?_without_sanlock} \
706
           %{?_without_libpcap} \
707
           %{?_without_macvtap} \
708
           %{?_without_audit} \
709
           %{?_without_dtrace} \
710 711
           %{with_packager} \
           %{with_packager_version} \
712 713
           --with-qemu-user=%{qemu_user} \
           --with-qemu-group=%{qemu_group} \
714
           --with-init-script=redhat \
715
           --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
J
Jim Meyering 已提交
716
make %{?_smp_mflags}
717
gzip -9 ChangeLog
718 719 720 721 722

%install
rm -fr %{buildroot}

%makeinstall
723
for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap
724 725 726
do
  (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
done
727
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
728
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
729 730
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
731 732
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
733

734
%if %{with_network}
735
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
736 737 738 739 740 741 742 743
# We don't want to install /etc/libvirt/qemu/networks in the main %files list
# because if the admin wants to delete the default network completely, we don't
# want to end up re-incarnating it on every RPM upgrade.
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
   $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
744
# Strip auto-generated UUID - we need it generated per-install
745
sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
746 747 748
%else
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
749 750
%endif
%if ! %{with_qemu}
751 752
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
753
%endif
754
%find_lang %{name}
755

756 757 758
%if ! %{with_lxc}
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
759
%endif
760

761 762 763 764
%if ! %{with_python}
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-python-%{version}
%endif

765 766 767 768
%if %{client_only}
rm -rf $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}
%endif

769 770
%if ! %{with_libvirtd}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter
771 772
mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version}/html \
   $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-devel-%{version}/
773 774
%endif

775 776
%if ! %{with_qemu}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
777
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
778
%endif
A
Amy Griffis 已提交
779 780
%if ! %{with_lxc}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
781
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
782 783 784
%endif
%if ! %{with_uml}
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml
A
Amy Griffis 已提交
785
%endif
786

787 788 789
%clean
rm -fr %{buildroot}

790 791 792 793 794 795
%check
cd tests
# These 3 tests don't current work in a mock build root
for i in nodeinfotest daemon-conf seclabeltest
do
  rm -f $i
796
  printf "#!/bin/sh\nexit 0\n" > $i
797 798 799 800
  chmod +x $i
done
make check

801
%pre
802
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
803
# Normally 'setup' adds this in /etc/passwd, but this is
804
# here for case of upgrades from earlier Fedora/RHEL. This
805 806 807 808 809 810 811 812
# UID/GID pair is reserved for qemu:qemu
getent group kvm >/dev/null || groupadd -g 36 -r kvm
getent group qemu >/dev/null || groupadd -g 107 -r qemu
getent passwd qemu >/dev/null || \
  useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
    -c "qemu user" qemu
%endif

813
%post
814

815
%if %{with_libvirtd}
816
%if %{with_network}
817 818 819 820
# We want to install the default network for initial RPM installs
# or on the first upgrade from a non-network aware libvirt only.
# We check this by looking to see if the daemon is already installed
/sbin/chkconfig --list libvirtd 1>/dev/null 2>&1
E
Eric Blake 已提交
821
if test $? != 0 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml
822
then
823
    UUID=`/usr/bin/uuidgen`
824 825 826 827
    sed -e "s,</name>,</name>\n  <uuid>$UUID</uuid>," \
         < %{_datadir}/libvirt/networks/default.xml \
         > %{_sysconfdir}/libvirt/qemu/networks/default.xml
    ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
828
fi
829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868

# All newly defined networks will have a mac address for the bridge
# auto-generated, but networks already existing at the time of upgrade
# will not. We need to go through all the network configs, look for
# those that don't have a mac address, and add one.

network_files=$( (cd %{_localstatedir}/lib/libvirt/network && \
                  grep -L "mac address" *.xml; \
                  cd %{_sysconfdir}/libvirt/qemu/networks && \
                  grep -L "mac address" *.xml) 2>/dev/null \
                | sort -u)

for file in $network_files
do
   # each file exists in either the config or state directory (or both) and
   # does not have a mac address specified in either. We add the same mac
   # address to both files (or just one, if the other isn't there)

   mac4=`printf '%X' $(($RANDOM % 256))`
   mac5=`printf '%X' $(($RANDOM % 256))`
   mac6=`printf '%X' $(($RANDOM % 256))`
   for dir in %{_localstatedir}/lib/libvirt/network \
              %{_sysconfdir}/libvirt/qemu/networks
   do
      if test -f $dir/$file
      then
         sed -i.orig -e \
           "s|\(<bridge.*$\)|\0\n  <mac address='52:54:00:$mac4:$mac5:$mac6'/>|" \
           $dir/$file
         if test $? != 0
         then
             echo "failed to add <mac address='52:54:00:$mac4:$mac5:$mac6'/>" \
                  "to $dir/$file"
             mv -f $dir/$file.orig $dir/$file
         else
             rm -f $dir/$file.orig
         fi
      fi
   done
done
869
%endif
870

871 872 873 874 875 876
%if %{with_cgconfig}
if [ "$1" -eq "1" ]; then
/sbin/chkconfig cgconfig on
fi
%endif

877
/sbin/chkconfig --add libvirtd
878 879 880
if [ "$1" -ge "1" ]; then
	/sbin/service libvirtd condrestart > /dev/null 2>&1
fi
881
%endif
882

883
%preun
884
%if %{with_libvirtd}
885 886 887 888
if [ $1 = 0 ]; then
    /sbin/service libvirtd stop 1>/dev/null 2>&1
    /sbin/chkconfig --del libvirtd
fi
889
%endif
890

J
Jiri Denemark 已提交
891 892 893 894 895 896 897 898 899 900 901 902
%preun client

if [ $1 = 0 ]; then
    /sbin/chkconfig --del libvirt-guests
    rm -f /var/lib/libvirt/libvirt-guests
fi

%post client

/sbin/ldconfig
/sbin/chkconfig --add libvirt-guests
if [ $1 -ge 1 ]; then
903 904
    level=$(/sbin/runlevel | /bin/cut -d ' ' -f 2)
    if /sbin/chkconfig --list libvirt-guests | /bin/grep -q $level:on ; then
905 906 907 908
        # this doesn't do anything but allowing for libvirt-guests to be
        # stopped on the first shutdown
        /sbin/service libvirt-guests start > /dev/null 2>&1 || true
    fi
J
Jiri Denemark 已提交
909
fi
910 911

%postun client -p /sbin/ldconfig
912

913
%if %{with_libvirtd}
914
%files
915 916
%defattr(-, root, root)

917
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO
918
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
919

920
%if %{with_network}
921 922
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
923
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
924 925
%endif

926 927 928
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
%{_sysconfdir}/libvirt/nwfilter/*.xml

929
%{_sysconfdir}/rc.d/init.d/libvirtd
A
Alan Pevec 已提交
930
%doc daemon/libvirtd.upstart
931
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
932
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
933
%if %{with_dtrace}
934
%{_datadir}/systemtap/tapset/libvirtd.stp
935
%endif
936 937 938
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/
J
Jim Fehlig 已提交
939 940 941
%if %{with_libxl}
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
%endif
942

943
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
944
%if %{with_qemu}
945
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
946
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
947
%endif
A
Amy Griffis 已提交
948 949
%if %{with_lxc}
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
950 951 952 953
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
%endif
%if %{with_uml}
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml
A
Amy Griffis 已提交
954
%endif
955

956
%dir %{_datadir}/libvirt/
957 958

%if %{with_network}
959 960
%dir %{_datadir}/libvirt/networks/
%{_datadir}/libvirt/networks/default.xml
961 962
%endif

963
%dir %{_localstatedir}/run/libvirt/
964

965
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
966
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
967
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
968 969

%if %{with_qemu}
970
%dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
971 972
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
973 974 975 976 977 978 979 980 981
%endif
%if %{with_lxc}
%dir %{_localstatedir}/run/libvirt/lxc/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
%endif
%if %{with_uml}
%dir %{_localstatedir}/run/libvirt/uml/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
%endif
J
Jim Fehlig 已提交
982 983 984 985
%if %{with_libxl}
%dir %{_localstatedir}/run/libvirt/libxl/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
%endif
986 987 988
%if %{with_network}
%dir %{_localstatedir}/run/libvirt/network/
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
989
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
990 991 992
%endif

%if %{with_qemu}
993 994
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
995 996
%endif

997 998 999 1000 1001
%if %{with_lxc}
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
%endif

1002 1003 1004
%{_datadir}/augeas/lenses/libvirtd.aug
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug

D
Daniel P. Berrange 已提交
1005
%if %{with_polkit}
1006
%if 0%{?fedora} >= 12 || 0%{?rhel} >= 6
1007 1008
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
%else
1009
%{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
D
Daniel P. Berrange 已提交
1010
%endif
1011
%endif
1012

M
Mark McLoughlin 已提交
1013
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
1014

1015 1016 1017
%if %{with_lxc}
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
%endif
1018 1019

%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
1020
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
1021
%attr(0755, root, root) %{_sbindir}/libvirtd
1022

1023 1024
%{_mandir}/man8/libvirtd.8*

1025
%doc docs/*.xml
1026
%endif
1027

1028 1029 1030 1031 1032 1033
%if %{with_sanlock}
%files lock-sanlock
%defattr(-, root, root)
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
%endif

1034 1035 1036 1037 1038 1039
%files client -f %{name}.lang
%defattr(-, root, root)
%doc AUTHORS ChangeLog.gz NEWS README COPYING.LIB TODO

%{_mandir}/man1/virsh.1*
%{_mandir}/man1/virt-xml-validate.1*
1040
%{_mandir}/man1/virt-pki-validate.1*
1041 1042
%{_bindir}/virsh
%{_bindir}/virt-xml-validate
1043
%{_bindir}/virt-pki-validate
1044 1045 1046 1047 1048 1049
%{_libdir}/lib*.so.*

%dir %{_datadir}/libvirt/
%dir %{_datadir}/libvirt/schemas/

%{_datadir}/libvirt/schemas/domain.rng
1050
%{_datadir}/libvirt/schemas/domainsnapshot.rng
1051 1052 1053 1054 1055
%{_datadir}/libvirt/schemas/network.rng
%{_datadir}/libvirt/schemas/storagepool.rng
%{_datadir}/libvirt/schemas/storagevol.rng
%{_datadir}/libvirt/schemas/nodedev.rng
%{_datadir}/libvirt/schemas/capability.rng
1056
%{_datadir}/libvirt/schemas/interface.rng
M
Miloslav Trmač 已提交
1057
%{_datadir}/libvirt/schemas/secret.rng
1058
%{_datadir}/libvirt/schemas/storageencryption.rng
1059
%{_datadir}/libvirt/schemas/nwfilter.rng
1060

J
Jiri Denemark 已提交
1061 1062
%{_datadir}/libvirt/cpu_map.xml

1063 1064
%{_sysconfdir}/rc.d/init.d/libvirt-guests
%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
E
Eric Blake 已提交
1065
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
1066

1067 1068 1069 1070
%if %{with_sasl}
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
%endif

1071 1072 1073 1074
%files devel
%defattr(-, root, root)

%{_libdir}/lib*.so
1075
%dir %{_includedir}/libvirt
1076 1077
%{_includedir}/libvirt/*.h
%{_libdir}/pkgconfig/libvirt.pc
1078
%dir %{_datadir}/gtk-doc/html/libvirt/
1079 1080 1081 1082
%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
%doc %{_datadir}/gtk-doc/html/libvirt/*.html
%doc %{_datadir}/gtk-doc/html/libvirt/*.png
%doc %{_datadir}/gtk-doc/html/libvirt/*.css
1083

1084
%doc docs/*.html docs/html docs/*.gif
1085
%doc docs/libvirt-api.xml
1086 1087 1088 1089
%doc examples/hellolibvirt
%doc examples/domain-events/events-c
%doc examples/dominfo
%doc examples/domsuspend
1090
%doc examples/openauth
1091
%doc examples/xml
1092
%doc examples/systemtap
1093

1094
%if %{with_python}
1095 1096 1097 1098
%files python
%defattr(-, root, root)

%doc AUTHORS NEWS README COPYING.LIB
1099 1100
%{_libdir}/python*/site-packages/libvirt.py*
%{_libdir}/python*/site-packages/libvirtmod*
1101
%doc python/tests/*.py
1102
%doc python/TODO
1103 1104
%doc examples/python
%doc examples/domain-events/events-python
1105
%endif
1106

1107
%changelog
D
Daniel Veillard 已提交
1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118
* Mon Jun  6 2011 Daniel Veillard <veillard@redhat.com> - 0.9.2-1
- Framework for lock manager plugins
- API for network config change transactions
- flags for setting memory parameters
- virDomainGetState public API
- qemu: allow blkstat/blkinfo calls during migration
- Introduce migration v3 API
- Defining the Screenshot public API
- public API for NMI injection
- Various improvements and bug fixes

D
Daniel Veillard 已提交
1119 1120 1121 1122 1123 1124 1125 1126
* Thu May  5 2011 Daniel Veillard <veillard@redhat.com> - 0.9.1-1
- support various persistent domain updates
- improvements on memory APIs
- Add virDomainEventRebootNew
- various improvements to libxl driver
- Spice: support audio, images and stream compression
- Various improvements and bug fixes

D
Daniel Veillard 已提交
1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139
* Mon Apr  4 2011 Daniel Veillard <veillard@redhat.com> - 0.9.0-1
- Support cputune cpu usage tuning
- Add public APIs for storage volume upload/download
- Add public API for setting migration speed on the fly
- Add libxenlight driver
- qemu: support migration to fd
- libvirt: add virDomain{Get,Set}BlkioParameters
- setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
- Expose event loop implementation as a public API
- Dump the debug buffer to libvirtd.log on fatal signal
- Audit support
- Various improvements and bug fixes

D
Daniel Veillard 已提交
1140 1141 1142 1143 1144 1145 1146
* Thu Feb 17 2011 Daniel Veillard <veillard@redhat.com> - 0.8.8-1
- expose new API for sysinfo extraction
- cgroup blkio weight support
- smartcard device support
- qemu: Support per-device boot ordering
- Various improvements and bug fixes

D
Daniel Veillard 已提交
1147 1148 1149 1150 1151 1152 1153
* Tue Jan  4 2011 Daniel Veillard <veillard@redhat.com> - 0.8.7-1
- Preliminary support for VirtualBox 4.0
- IPv6 support
- Add VMware Workstation and Player driver driver
- Add network disk support
- Various improvements and bug fixes

D
Daniel Veillard 已提交
1154 1155 1156 1157 1158 1159 1160 1161 1162
* Tue Nov 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.6-1
- Add support for iSCSI target auto-discovery
- QED: Basic support for QED images
- remote console support
- support for SPICE graphics
- sysinfo and VMBIOS support
- virsh qemu-monitor-command
- various improvements and bug fixes

D
Daniel Veillard 已提交
1163 1164 1165 1166 1167 1168 1169 1170 1171 1172
* Fri Oct 29 2010 Daniel Veillard <veillard@redhat.com> - 0.8.5-1
- Enable JSON and netdev features in QEMU >= 0.13
- framework for auditing integration
- framework DTrace/SystemTap integration
- Setting the number of vcpu at boot
- Enable support for nested SVM
- Virtio plan9fs filesystem QEMU
- Memory parameter controls
- various improvements and bug fixes

D
Daniel Veillard 已提交
1173 1174 1175 1176
* Fri Sep 10 2010 Daniel Veillard <veillard@redhat.com> - 0.8.4-1
- big improvements to UML driver
- various improvements and bug fixes

D
Daniel Veillard 已提交
1177
* Wed Aug  4 2010 Daniel Veillard <veillard@redhat.com> - 0.8.3-1
D
Daniel Veillard 已提交
1178 1179 1180 1181 1182
- esx: Support vSphere 4.1
- Qemu arbitrary monitor commands
- Qemu Monitor API entry point
- various improvements and bug fixes

D
Daniel Veillard 已提交
1183 1184 1185 1186 1187 1188 1189 1190
* Mon Jul  5 2010 Daniel Veillard <veillard@redhat.com> - 0.8.2-1
- phyp: adding support for IVM
- libvirt: introduce domainCreateWithFlags API
- add 802.1Qbh and 802.1Qbg switches handling
- Support for VirtualBox version 3.2
- Init script for handling guests on shutdown/boot
- qemu: live migration with non-shared storage for kvm

D
Daniel Veillard 已提交
1191 1192 1193 1194 1195
* Fri Apr 30 2010 Daniel Veillard <veillard@redhat.com> - 0.8.1-1
- Starts dnsmasq from libvirtd with --dhcp-hostsfile
- Add virDomainGetBlockInfo API to query disk sizing
- a lot of bug fixes and cleanups

D
Daniel Veillard 已提交
1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209
* Mon Apr 12 2010 Daniel Veillard <veillard@redhat.com> - 0.8.0-1
- Snapshotting support (QEmu/VBox/ESX)
- Network filtering API
- XenAPI driver
- new APIs for domain events
- Libvirt managed save API
- timer subselection for domain clock
- synchronous hooks
- API to update guest CPU to host CPU
- virDomainUpdateDeviceFlags new API
- migrate max downtime API
- volume wiping API
- and many bug fixes

D
Daniel Veillard 已提交
1210 1211 1212 1213 1214 1215 1216 1217
* Fri Mar  5 2010 Daniel Veillard <veillard@redhat.com> - 0.7.7-1
- macvtap support
- async job handling
- virtio channel
- computing baseline CPU
- virDomain{Attach,Detach}DeviceFlags
- assorted bug fixes and lots of cleanups

D
Daniel Veillard 已提交
1218 1219
* Wed Feb  3 2010 Daniel Veillard <veillard@redhat.com> - 0.7.6-1

D
Daniel Veillard 已提交
1220 1221 1222 1223 1224 1225 1226
* Wed Dec 23 2009 Daniel Veillard <veillard@redhat.com> - 0.7.5-1
- Add new API virDomainMemoryStats
- Public API and domain extension for CPU flags
- vbox: Add support for version 3.1
- Support QEMU's virtual FAT block device driver
- a lot of fixes

D
Daniel Veillard 已提交
1227 1228 1229 1230 1231 1232 1233 1234
* Fri Nov 20 2009 Daniel Veillard <veillard@redhat.com> - 0.7.3-1
- udev node device backend
- API to check object properties
- better QEmu monitor processing
- MAC address based port filtering for qemu
- support IPv6 and multiple addresses per interfaces
- a lot of fixes

D
Daniel Veillard 已提交
1235 1236 1237 1238 1239 1240 1241 1242 1243
* Tue Sep 15 2009 Daniel Veillard <veillard@redhat.com> - 0.7.1-1
- ESX, VBox driver updates
- mutipath support
- support for encrypted (qcow) volume
- compressed save image format for Qemu/KVM
- QEmu host PCI device hotplug support
- configuration of huge pages in guests
- a lot of fixes

D
Daniel Veillard 已提交
1244 1245 1246 1247 1248 1249 1250 1251 1252
* Wed Aug  5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1
- ESX, VBox3, Power Hypervisor drivers
- new net filesystem glusterfs
- Storage cloning for LVM and Disk backends
- interface implementation based on netcf
- Support cgroups in QEMU driver
- QEmu hotplug NIC support
- a lot of fixes

D
Daniel Veillard 已提交
1253 1254 1255
* Fri Jul  3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.5-1
- release of 0.6.5

D
Daniel Veillard 已提交
1256 1257 1258 1259
* Fri May 29 2009 Daniel Veillard <veillard@redhat.com> - 0.6.4-1
- release of 0.6.4
- various new APIs

D
Daniel Veillard 已提交
1260 1261 1262 1263
* Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1
- release of 0.6.3
- VirtualBox driver

D
Daniel Veillard 已提交
1264 1265 1266 1267 1268 1269 1270 1271 1272
* Fri Apr  3 2009 Daniel Veillard <veillard@redhat.com> - 0.6.2-1
- release of 0.6.2

* Fri Mar  4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1
- release of 0.6.1

* Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1
- release of 0.6.0

D
Daniel Veillard 已提交
1273 1274 1275
* Tue Nov 25 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1
- release of 0.5.0

1276 1277 1278
* Tue Sep 23 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-1
- release of 0.4.6

1279 1280 1281 1282 1283 1284 1285
* Mon Sep  8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-1
- release of 0.4.5

* Wed Jun 25 2008 Daniel Veillard <veillard@redhat.com> - 0.4.4-1
- release of 0.4.4
- mostly a few bug fixes from 0.4.3

1286 1287 1288 1289
* Thu Jun 12 2008 Daniel Veillard <veillard@redhat.com> - 0.4.3-1
- release of 0.4.3
- lots of bug fixes and small improvements

D
Daniel Veillard 已提交
1290 1291 1292 1293
* Tue Apr  8 2008 Daniel Veillard <veillard@redhat.com> - 0.4.2-1
- release of 0.4.2
- lots of bug fixes and small improvements

D
Daniel Veillard 已提交
1294 1295 1296 1297 1298 1299 1300
* Mon Mar  3 2008 Daniel Veillard <veillard@redhat.com> - 0.4.1-1
- Release of 0.4.1
- Storage APIs
- xenner support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements

D
Daniel Veillard 已提交
1301 1302 1303 1304 1305 1306 1307 1308
* Tue Dec 18 2007 Daniel Veillard <veillard@redhat.com> - 0.4.0-1
- Release of 0.4.0
- SASL based authentication
- PolicyKit authentication
- improved NUMA and statistics support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements

1309 1310 1311 1312 1313 1314 1315
* Sun Sep 30 2007 Daniel Veillard <veillard@redhat.com> - 0.3.3-1
- Release of 0.3.3
- Avahi support
- NUMA support
- lots of assorted improvements, bugfixes and cleanups
- documentation and localization improvements

D
Daniel Veillard 已提交
1316 1317 1318 1319 1320 1321 1322
* Tue Aug 21 2007 Daniel Veillard <veillard@redhat.com> - 0.3.2-1
- Release of 0.3.2
- API for domains migration
- APIs for collecting statistics on disks and interfaces
- lots of assorted bugfixes and cleanups
- documentation and localization improvements

1323 1324 1325 1326 1327 1328 1329
* Tue Jul 24 2007 Daniel Veillard <veillard@redhat.com> - 0.3.1-1
- Release of 0.3.1
- localtime clock support
- PS/2 and USB input devices
- lots of assorted bugfixes and cleanups
- documentation and localization improvements

1330 1331 1332 1333 1334 1335 1336 1337
* Mon Jul  9 2007 Daniel Veillard <veillard@redhat.com> - 0.3.0-1
- Release of 0.3.0
- Secure remote access support
- unification of daemons
- lots of assorted bugfixes and cleanups
- documentation and localization improvements

* Fri Jun  8 2007 Daniel Veillard <veillard@redhat.com> - 0.2.3-1
1338 1339 1340 1341 1342
- Release of 0.2.3
- lot of assorted bugfixes and cleanups
- support for Xen-3.1
- new scheduler API

1343 1344 1345 1346 1347
* Tue Apr 17 2007 Daniel Veillard <veillard@redhat.com> - 0.2.2-1
- Release of 0.2.2
- lot of assorted bugfixes and cleanups
- preparing for Xen-3.0.5

1348 1349 1350 1351 1352
* Thu Mar 22 2007 Jeremy Katz <katzj@redhat.com> - 0.2.1-2.fc7
- don't require xen; we don't need the daemon and can control non-xen now
- fix scriptlet error (need to own more directories)
- update description text

1353
* Fri Mar 16 2007 Daniel Veillard <veillard@redhat.com> - 0.2.1-1
1354 1355 1356 1357 1358 1359
- Release of 0.2.1
- lot of bug and portability fixes
- Add support for network autostart and init scripts
- New API to detect the virtualization capabilities of a host
- Documentation updates

1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372
* Fri Feb 23 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-4.fc7
- Fix loading of guest & network configs

* Fri Feb 16 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-3.fc7
- Disable kqemu support since its not in Fedora qemu binary
- Fix for -vnc arg syntax change in 0.9.0  QEMU

* Thu Feb 15 2007 Daniel P. Berrange <berrange@redhat.com> - 0.2.0-2.fc7
- Fixed path to qemu daemon for autostart
- Fixed generation of <features> block in XML
- Pre-create config directory at startup

* Wed Feb 14 2007 Daniel Veillard <veillard@redhat.com> 0.2.0-1.fc7
1373 1374 1375 1376
- support for KVM and QEmu
- support for network configuration
- assorted fixes

1377
* Mon Jan 22 2007 Daniel Veillard <veillard@redhat.com> 0.1.11-1.fc7
1378 1379 1380 1381
- finish inactive Xen domains support
- memory leak fix
- RelaxNG schemas for XML configs

1382
* Wed Dec 20 2006 Daniel Veillard <veillard@redhat.com> 0.1.10-1.fc7
1383 1384 1385 1386 1387
- support for inactive Xen domains
- improved support for Xen display and vnc
- a few bug fixes
- localization updates

1388 1389 1390
* Thu Dec  7 2006 Jeremy Katz <katzj@redhat.com> - 0.1.9-2
- rebuild against python 2.5

1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401
* Wed Nov 29 2006 Daniel Veillard <veillard@redhat.com> 0.1.9-1
- better error reporting
- python bindings fixes and extensions
- add support for shareable drives
- add support for non-bridge style networking
- hot plug device support
- added support for inactive domains
- API to dump core of domains
- various bug fixes, cleanups and improvements
- updated the localization

1402 1403 1404 1405 1406 1407 1408
* Tue Nov  7 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-3
- it's pkgconfig not pgkconfig !

* Mon Nov  6 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-2
- fixing spec file, added %dist, -devel requires pkgconfig and xen-devel
- Resolves: rhbz#202320

1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420
* Mon Oct 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.8-1
- fix missing page size detection code for ia64
- fix mlock size when getting domain info list from hypervisor
- vcpu number initialization
- don't label crashed domains as shut off
- fix virsh man page
- blktapdd support for alternate drivers like blktap
- memory leak fixes (xend interface and XML parsing)
- compile fix
- mlock/munlock size fixes

* Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.7-1
1421 1422 1423
- Fix bug when running against xen-3.0.3 hypercalls
- Fix memory bug when getting vcpus info from xend

1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436
* Fri Sep 22 2006 Daniel Veillard <veillard@redhat.com> 0.1.6-1
- Support for localization
- Support for new Xen-3.0.3 cdrom and disk configuration
- Support for setting VNC port
- Fix bug when running against xen-3.0.2 hypercalls
- Fix reconnection problem when talking directly to http xend

* Tue Sep  5 2006 Jeremy Katz <katzj@redhat.com> - 0.1.5-3
- patch from danpb to support new-format cd devices for HVM guests

* Tue Sep  5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-2
- reactivating ia64 support

1437 1438 1439 1440 1441 1442 1443 1444 1445 1446
* Tue Sep  5 2006 Daniel Veillard <veillard@redhat.com> 0.1.5-1
- new release
- bug fixes
- support for new hypervisor calls
- early code for config files and defined domains

* Mon Sep  4 2006 Daniel Berrange <berrange@redhat.com> - 0.1.4-5
- add patch to address dom0_ops API breakage in Xen 3.0.3 tree

* Mon Aug 28 2006 Jeremy Katz <katzj@redhat.com> - 0.1.4-4
1447
- add patch to support paravirt framebuffer in Xen
1448 1449 1450 1451 1452 1453 1454

* Mon Aug 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-3
- another patch to fix network handling in non-HVM guests

* Thu Aug 17 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-2
- patch to fix virParseUUID()

D
Daniel Veillard 已提交
1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473
* Wed Aug 16 2006 Daniel Veillard <veillard@redhat.com> 0.1.4-1
- vCPUs and affinity support
- more complete XML, console and boot options
- specific features support
- enforced read-only connections
- various improvements, bug fixes

* Wed Aug  2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-6
- add patch from pvetere to allow getting uuid from libvirt

* Wed Aug  2 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-5
- build on ia64 now

* Thu Jul 27 2006 Jeremy Katz <katzj@redhat.com> - 0.1.3-4
- don't BR xen, we just need xen-devel

* Thu Jul 27 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-3
- need rebuild since libxenstore is now versionned

1474 1475 1476 1477 1478 1479
* Mon Jul 24 2006 Mark McLoughlin <markmc@redhat.com> - 0.1.3-2
- Add BuildRequires: xen-devel

* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 0.1.3-1.1
- rebuild

1480 1481 1482 1483
* Tue Jul 11 2006 Daniel Veillard <veillard@redhat.com> 0.1.3-1
- support for HVM Xen guests
- various bugfixes

1484 1485 1486 1487
* Mon Jul  3 2006 Daniel Veillard <veillard@redhat.com> 0.1.2-1
- added a proxy mechanism for read only access using httpu
- fixed header includes paths

1488 1489 1490 1491 1492 1493 1494 1495 1496
* Wed Jun 21 2006 Daniel Veillard <veillard@redhat.com> 0.1.1-1
- extend and cleanup the driver infrastructure and code
- python examples
- extend uuid support
- bug fixes, buffer handling cleanups
- support for new Xen hypervisor API
- test driver for unit testing
- virsh --conect argument

1497 1498 1499 1500 1501 1502 1503
* Mon Apr 10 2006 Daniel Veillard <veillard@redhat.com> 0.1.0-1
- various fixes
- new APIs: for Node information and Reboot
- virsh improvements and extensions
- documentation updates and man page
- enhancement and fixes of the XML description format

1504 1505 1506 1507 1508 1509
* Tue Feb 28 2006 Daniel Veillard <veillard@redhat.com> 0.0.6-1
- added error handling APIs
- small bug fixes
- improve python bindings
- augment documentation and regression tests

1510 1511 1512 1513 1514 1515
* Thu Feb 23 2006 Daniel Veillard <veillard@redhat.com> 0.0.5-1
- new domain creation API
- new UUID based APIs
- more tests, documentation, devhelp
- bug fixes

1516 1517 1518
* Fri Feb 10 2006 Daniel Veillard <veillard@redhat.com> 0.0.4-1
- fixes some problems in 0.0.3 due to the change of names

1519
* Wed Feb  8 2006 Daniel Veillard <veillard@redhat.com> 0.0.3-1
1520
- changed library name to libvirt from libvir, complete and test the python
1521 1522
  bindings

D
Daniel Veillard 已提交
1523 1524 1525 1526
* Sun Jan 29 2006 Daniel Veillard <veillard@redhat.com> 0.0.2-1
- upstream release of 0.0.2, use xend, save and restore added, python bindings
  fixed

1527 1528
* Wed Nov  2 2005 Daniel Veillard <veillard@redhat.com> 0.0.1-1
- created