Now that Neponset, UCB1x00 and SA1111 are all converted to use the IRQ
allocation interfaces, we can enable sparse IRQ support for SA11x0
platforms.

In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine
and explicitly include mach/irqs.h as needed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the new unused DMA controller definitions from mach/SA-1100.h.
These are now private to the SA-11x0 DMA engine driver and contained
within the driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that all users are converted over to using the DMA engine API,
we can get rid of the old platform dependent DMA driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The sa1111 support will ioremap() the device; there is no need for
platforms to setup a static mapping for this.  Remove the static
mapping for this device from badge4, jornada720 and neponset.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use dev_err() to report device specific errors rather than printk().
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the releasing of resources out of the release function - this
allows a cleaner and more conventional arrangement of the registration
failure paths and a saner unregistration process for these devices.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It's pointless registering the PS/2 interfaces with the dmabounce code
when there's no DMA support for these in hardware, so only setup the
DMA masks for two subdevices which support DMA - the OHCI and SAC.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use the bus notifier to register sa1111 devices with dmabounce, rather
than after the device has been registered, potentially racing with
driver binding.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the USB interface register definitions into the driver, rather
than keeping them in a common place.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the PCMCIA interface register definitions into the driver, rather
than keeping them in a common place.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the PS/2 interface register definitions into the driver, rather
than keeping them in a common location.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Get rid of the unused GPIO register definitions - we access GPIO
registers through the base + offset method, and having the phys
address definitions is unnecessary duplication.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Some platforms don't want certain devices to be registered, because,
eg, the interface is not wired.  Provide a way for platforms to
prevent various devices from being registered via a devid bitmask in
the platform data.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Get rid of the NO_IRQ madness from Acorn expansion card handling code.
Thankfully, are relatively few users of this here, and so it's easy to
audit.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use DEFINE_RES_xxx() to define device resources.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This register is only present on older platforms, and not on RiscPC,
so lets remove this unused support.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use irq_alloc_descs() to allocate IRQs for expansion cards.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use irq chip data to store the expansion card data pointer, rather
than converting from the interrupt number to a slot number.  This
allows the interrupt chip methods to avoid knowing about interrupt
numbering.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

RiscPC is the only platform using the Acorn expansion card support, so
move it into its mach-* directory.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use IRQ_TIMER0 instead, which is the same thing.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than using a plain integer, use the definition already provided.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than including asm/irq.h into the keyboard driver, pass the
IRQ numbers via the platform device instead.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Nothing but RiscPC makes use of the Acorn timekeeping code, so move
it into mach-rpc.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The motivation for this patchset was that I was looking at a way for a
qemu-kvm process, to exclude the guest memory from its core dump, which
can be quite large.  There are already a number of filter flags in
/proc/<pid>/coredump_filter, however, these allow one to specify 'types'
of kernel memory, not specific address ranges (which is needed in this
case).

Since there are no more vma flags available, the first patch eliminates
the need for the 'VM_ALWAYSDUMP' flag.  The flag is used internally by
the kernel to mark vdso and vsyscall pages.  However, it is simple
enough to check if a vma covers a vdso or vsyscall page without the need
for this flag.

The second patch then replaces the 'VM_ALWAYSDUMP' flag with a new
'VM_NODUMP' flag, which can be set by userspace using new madvise flags:
'MADV_DONTDUMP', and unset via 'MADV_DODUMP'.  The core dump filters
continue to work the same as before unless 'MADV_DONTDUMP' is set on the
region.

The qemu code which implements this features is at:

  http://people.redhat.com/~jbaron/qemu-dump/qemu-dump.patch

In my testing the qemu core dump shrunk from 383MB -> 13MB with this
patch.

I also believe that the 'MADV_DONTDUMP' flag might be useful for
security sensitive apps, which might want to select which areas are
dumped.

This patch:

The VM_ALWAYSDUMP flag is currently used by the coredump code to
indicate that a vma is part of a vsyscall or vdso section.  However, we
can determine if a vma is in one these sections by checking it against
the gate_vma and checking for a non-NULL return value from
arch_vma_name().  Thus, freeing a valuable vma bit.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRoland McGrath <roland@hack.frob.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 33bf5610 ("feature removal of io_remap_page_range()") removed
io_remap_page_range(), but it is still included in some arch header
files.  It has no in-tree users.
Signed-off-by: NJavi Merino <javi.merino@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sh_mipi uses some clocks, but the method of setup depends on CPU.

Current SuperH (like sh73a0) can control all of these clocks
by CPG (Clock Pulse Generator).
It means we can control it by clock framework only.
But on sh7372, it needs CPG settings AND sh_mipi PHYCTRL::PLLDS,
and only sh7372 has PHYCTRL::PLLDS.

But on current sh_mipi driver, PHYCTRL::PLLDS of sh7372 was
overwrote since the callback timing of clock setting was changed
by c2658b70
(fbdev: sh_mipi_dsi: fixup setup timing of sh_mipi_setup()).
To solve this issue, this patch adds extra .phyctrl.

This patch adds detail explanation for unclear mipi settings
and fixup wrong PHYCTRL::PLLDS value for ap4evb (0xb -> 0x6).
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

There's no need to export pci_flags; it's not exported by any other
architecture, and no modules reference it.

CC: Rob Herring <rob.herring@calxeda.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

[swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NCong Wang <amwang@redhat.com>

Signed-off-by: NCong Wang <amwang@redhat.com>

Automatically select USB_ULPI if USB is enabled on Tegra.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlan Ott <alan@signal11.us>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

In previous patch (arm/tegra: add timeout to PCIe PLL lock detection loop)
tegra_pcie_enable_controller() function type has been changed from
void to int, but the last return statement wasn't converted, so
function returns undefined value. Fix it.

Also while at it, address couple of minor concerns raised by reviewers:
use usleep_range for delay, and lower the value of timeout to 300ms
to be consistent with Nvidia Vibrante kernel.
Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch allows us to drop the OMAP dependency from the OMAP4 keypad
driver.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Make the TMU clocksource driver mark its device as "always on"
using pm_genpd_dev_always_on() to protect it from surprise power
removals and make sh7372_add_standard_devices() add TMU devices on
sh7372 to the A4R power domain so that their "always on" flags
are taken into account as appropriate.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NSimon Horman <horms@verge.net.au>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Cc: stable@vger.kernel.org

mach-ux500/timer.c lacked the inclusion of mach/irqs.h, and thus
failed to compile. Fix it and also remove an unused variable.

Test compiled only.
Reported-by: NLee Jones <lee.jones@linaro.org>
Cc: Arnd Bergman <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

In i.MX35-PDK, OV2640  camera is populated on the
personality board. This camera is registered as a subdevice via soc-camera interface.
Signed-off-by: NAlex Gershgorin <alexg@meprolight.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds framebuffer support for freescale mx35 3ds board
Signed-off-by: NWu Guoxing <b39297@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds support cpufreq for EXYNOS5250 SoC. Basically,
the exynos-cpufreq.c is used commonly and exynos5250-cpufreq.c
is used for EXYNOS5250(two Cortex-A15 cores) SoC.
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch adds support cpufreq for EXYNOS4X12 SoCs. Basically,
the exynos-cpufreq.c is used commonly and exynos4x12-cpufreq.c
is used for EXYNOS4212(two Cortex-A9 cores) and EXYNOS4412(four
Cortex-A9 cores) SoCs.
Signed-off-by: NJaecheol Lee <jc.lee@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch changes to use ioremap() for EXYNOS4210
so that we can drop the static mapping for EXYNOS
SoCs.

Note: Will be updated for all of Samsung GPIOlibs
to use ioremap() next time.
Signed-off-by: NSangsu Park <sangsu4u.park@samsung.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>