Now that Neponset, UCB1x00 and SA1111 are all converted to use the IRQ
allocation interfaces, we can enable sparse IRQ support for SA11x0
platforms.

In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine
and explicitly include mach/irqs.h as needed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove the new unused DMA controller definitions from mach/SA-1100.h.
These are now private to the SA-11x0 DMA engine driver and contained
within the driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that all users are converted over to using the DMA engine API,
we can get rid of the old platform dependent DMA driver.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Enable ext4, cgroups and devtmpfs.
Signed-off-by: NRichard Weinberger <richard@nod.at>

x86_64 UML is unable to load modules if more than 504MiB
of memory are used.
This happens because on x86_64 the UML process has a quite high
start address (typically around 0x6000000).
If UML's memory is larger than 504MiB VMALLOC_START happens to be after
0x8000000. This is no problem unless one loads a module which was built
with R_X86_64_32S relocations.
Symbols with a location > 0x8000000 cannot be used with R_X86_64_32S

To deal with this x86_64 UML has to be compiled with -mcmodel=large
such that no R_X86_64_32S relocations are used.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reported-by: N전하늘 <allskyee@gmail.com>

UML has no io memory but implements everything defined in
generic-asm/io.h.
Signed-off-by: NRichard Weinberger <richard@nod.at>

At some places io_remap_pfn_range() is needed.
UML has to serve it like all other archs do.
Signed-off-by: NRichard Weinberger <richard@nod.at>

nicked from patch by dwmw2 back in July
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
[richard@nod.at: Re-export SUBARCH in arch/um/Makefile]
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

... just strip NOSTDINC_FLAGS out of it for those
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

... the same one that controls whether elf_aux.o is included into the
build, bringing the vsyscall_e... into it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

just provide get_current_pid() to the userland side of things
instead of get_current() + manual poking in its results
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

... and switch chan_interrupt() to directly calling close_one_chan(),
so we can lose delay_free_irq argument of close_chan() as well.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

... since chan_interrupt() might schedule it if there's too much
incoming data.  Kill task argument of chan_interrupt(), while
we are at it - it's always &line->task.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

looks like a half-arsed duplicate of line->enabled
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

put references to in and out chans associated with line into
explicit struct chan * fields in it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

now we can do that...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

move config-independent parts of initialization into
register_lines(), call setup_one_line() after it instead
of abusing ->init_str.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Current code doesn't update the symlinks in /sys/dev/char when we add/remove
tty lines.  Fixing that allows to stop messing with ->valid before the driver
registration, which is a Good Thing(tm) - we shouldn't have it set before we
really have the things set up and ready for line_open().

We need tty_driver available to call tty_{un,}register_device(), so we just
stash a reference to it into struct line_driver.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Pull parse_chan_pair() call into setup_one_line(), under the mutex.
We really don't want open() to succeed before parse_chan_pair() had
been done (or after it has failed, BTW).  We also want "remove con<n>"
to free irqs, etc., same as "config con<n>=none".
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

If two processes are opening the same line, the second to get
into line_open() will decide that it doesn't need to do anything
(correctly) or wait for anything.  The latter, unfortunately,
is incorrect - the first opener might not be through yet.  We
need to have exclusion covering the entire line_init(), including
the blocking parts.  Moreover, the next patch will need to
widen the exclusion on mconsole side of things, also including
the blocking bits, so let's just convert that sucker to mutex...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

make line_setup() act on a separate array of conf strings + default conf,
have lines array initialized explicitly by that data, bury LINE_INIT()
macro from hell.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

The sa1111 support will ioremap() the device; there is no need for
platforms to setup a static mapping for this.  Remove the static
mapping for this device from badge4, jornada720 and neponset.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use dev_err() to report device specific errors rather than printk().
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the releasing of resources out of the release function - this
allows a cleaner and more conventional arrangement of the registration
failure paths and a saner unregistration process for these devices.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It's pointless registering the PS/2 interfaces with the dmabounce code
when there's no DMA support for these in hardware, so only setup the
DMA masks for two subdevices which support DMA - the OHCI and SAC.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>