ARM: 7342/2: sa1100: prepare for sparse irq conversion

In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine
and explicitly include mach/irqs.h as needed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-sa1100/assabet.c

@@ -25,7 +25,6 @@
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/assabet.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -534,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
 	.atag_offset	= 0x100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= assabet_init,

arch/arm/mach-sa1100/badge4.c

@@ -304,6 +304,7 @@ static void __init badge4_map_io(void)
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
 	.atag_offset	= 0x100,
 	.map_io		= badge4_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 #ifdef CONFIG_SA1111

arch/arm/mach-sa1100/cerf.c

@@ -18,7 +18,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
 
@@ -30,6 +29,7 @@
 
 #include <mach/cerf.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
@@ -130,6 +130,7 @@ static void __init cerf_init(void)
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	/* Maintainer: support@intrinsyc.com */
 	.map_io		= cerf_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= cerf_init,

arch/arm/mach-sa1100/collie.c

@@ -33,7 +33,6 @@
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/collie.h>
@@ -47,6 +46,7 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -393,6 +393,7 @@ static void __init collie_map_io(void)
 
 MACHINE_START(COLLIE, "Sharp-Collie")
 	.map_io		= collie_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= collie_init,

arch/arm/mach-sa1100/generic.c

@@ -23,12 +23,14 @@
 #include <video/sa1100fb.h>
 
 #include <asm/div64.h>
-#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/irq.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 unsigned int reset_status;

arch/arm/mach-sa1100/h3100.c

@@ -21,6 +21,7 @@
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -105,6 +106,7 @@ static void __init h3100_mach_init(void)
 MACHINE_START(H3100, "Compaq iPAQ H3100")
 	.atag_offset	= 0x100,
 	.map_io		= h3100_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3100_mach_init,

arch/arm/mach-sa1100/h3600.c

@@ -21,6 +21,7 @@
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -155,6 +156,7 @@ static void __init h3600_mach_init(void)
 MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.atag_offset	= 0x100,
 	.map_io		= h3600_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3600_mach_init,

arch/arm/mach-sa1100/hackkit.c

@@ -22,12 +22,10 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -35,6 +33,9 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 /**********************************************************************
@@ -194,6 +195,7 @@ static void __init hackkit_init(void)
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
 	.atag_offset	= 0x100,
 	.map_io		= hackkit_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= hackkit_init,

arch/arm/mach-sa1100/include/mach/irqs.h

@@ -82,3 +82,5 @@
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
 #endif
+
+#define SA1100_NR_IRQS NR_IRQS

arch/arm/mach-sa1100/irq.c

@@ -17,6 +17,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"

arch/arm/mach-sa1100/jornada720.c

@@ -23,9 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
-#include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -34,6 +32,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 /*
@@ -344,6 +345,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
 	.atag_offset	= 0x100,
 	.map_io		= jornada720_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= jornada720_mach_init,

arch/arm/mach-sa1100/lart.c

@@ -17,6 +17,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -143,6 +144,7 @@ static void __init lart_map_io(void)
 MACHINE_START(LART, "LART")
 	.atag_offset	= 0x100,
 	.map_io		= lart_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
 	.timer		= &sa1100_timer,

arch/arm/mach-sa1100/nanoengine.c

@@ -28,6 +28,7 @@
 
 #include <mach/hardware.h>
 #include <mach/nanoengine.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -107,6 +108,7 @@ static void __init nanoengine_init(void)
 MACHINE_START(NANOENGINE, "BSE nanoEngine")
 	.atag_offset	= 0x100,
 	.map_io		= nanoengine_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= nanoengine_init,

arch/arm/mach-sa1100/neponset.c

@@ -21,6 +21,7 @@
 #include <mach/hardware.h>
 #include <mach/assabet.h>
 #include <mach/neponset.h>
+#include <mach/irqs.h>
 
 #define NEP_IRQ_SMC91X	0
 #define NEP_IRQ_USAR	1

arch/arm/mach-sa1100/pleb.c

@@ -131,6 +131,7 @@ static void __init pleb_map_io(void)
 
 MACHINE_START(PLEB, "PLEB")
 	.map_io		= pleb_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine   = pleb_init,

arch/arm/mach-sa1100/shannon.c

@@ -21,6 +21,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
 #include <mach/shannon.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -99,6 +100,7 @@ static void __init shannon_map_io(void)
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
 	.atag_offset	= 0x100,
 	.map_io		= shannon_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= shannon_init,

arch/arm/mach-sa1100/simpad.c

@@ -7,7 +7,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/proc_fs.h>
-#include <linux/string.h> 
+#include <linux/string.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/ucb1x00.h>
@@ -16,7 +16,6 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
 
@@ -27,6 +26,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
 #include <mach/simpad.h>
+#include <mach/irqs.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
@@ -393,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
 	.atag_offset	= 0x100,
 	.map_io		= simpad_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.restart	= sa11x0_restart,

arch/arm/mach-sa1100/ssp.c

@@ -19,8 +19,8 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000

arch/arm/mach-sa1100/time.c

@@ -18,6 +18,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 static u32 notrace sa1100_read_sched_clock(void)
 {

drivers/gpio/gpio-sa1100.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
 {

drivers/tty/serial/sa1100.c

@@ -38,6 +38,7 @@
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach/serial_sa1100.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */