When the WriteObject mailbox response has change_status set to is 0x2
(Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also
be checked to see if a fw reset is sufficient to enable all new features in
the updated firmware image. If not, a fw reset would start the new
firmware, but with a feature level equal to existing firmware.  To enable
the new features, a chip reset/pci slot reset would be required.

Check the CSF bit when change_status is 0x2 or 0x4 to know whether to
perform a pci bus reset or fw reset.

Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch reworks the fdmi symbolic node name data for the following two
issues:

 - Correcting extraneous periods following the DV and HN fdmi data fields.

 - Avoiding buffer overflow issues when formatting the data.

The fix to the fist issue is to just remove the characters.

The fix to the second issue has all data being staged in temporary storage
before being moved to the real buffer.

Link: https://lore.kernel.org/r/20191218235808.31922-3-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

NVMe device re-discovery does not complete. Dev_loss_tmo messages seen on
initiator after recovery from a link disturbance.

The failing case is the following:

When the driver (as a NVME target) receives a PLOGI, the driver initiates
an "unreg rpi" mailbox command. While the mailbox command is in progress,
the driver requests that an ACC be sent to the initiator. The target's ACC
is received by the initiator and the initiator then transmits a PLOGI. The
driver receives the PLOGI prior to receiving the completion for the PLOGI
response WQE that sent the ACC. (Different delivery sources from the hw so
the race is very possible). Given the PLOGI is prior to the ACC completion
(signifying PLOGI exchange complete), the driver LS_RJT's the PRLI. The
"unreg rpi" mailbox then completes. Since PRLI has been received, the
driver transmits a PLOGI to restart discovery, which the initiator then
ACC's.  If the driver processes the (re)PLOGI ACC prior to the completing
the handling for the earlier ACC it sent the intiators original PLOGI,
there is no state change for completion of the (re)PLOGI. The ndlp remains
in "PLOGI Sent" and the initiator continues sending PRLI's which are
rejected by the target until timeout or retry is reached.

Fix by: When in target mode, defer sending an ACC for the received PLOGI
until unreg RPI completes.

Link: https://lore.kernel.org/r/20191218235808.31922-2-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20191217220617.28084-15-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

MTCP dump failed due to MB Reg 10 was picking garbage data from stack
memory.

Fixes: 81178772 ("[SCSI] qla2xxx: Implemetation of mctp.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix race condition between GNL completion processing and GNL request. Late
submission of GNL request was not seen by the GNL completion thread. This
patch will re-submit the GNL request for late submission fcport.

Link: https://lore.kernel.org/r/20191217220617.28084-13-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes offset for Format-2 data structure for Report ID
Acquisition. This caused driver to set remote_nport_id to 0x0000 in N2N
configuration. In a scenario where initiator's WWPN is higher than target's
WWPN, driver will assign 0x00 as target nport-id, which results into login
failure.

Link: https://lore.kernel.org/r/20191217220617.28084-12-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Consolidate scan for fabric loop and fabric topologies into a single scan.

Link: https://lore.kernel.org/r/20191217220617.28084-11-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes some instances of FCF_ASYNC_{SENT|ACTIVE} flag setting and
clearning were missing.

Link: https://lore.kernel.org/r/20191217220617.28084-10-hmadhani@marvell.comSigned-off-by: NShyam Sundar <ssundar@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Session is stuck if driver sees FW has received a PRLI. Driver allows FW to
finish with processing of PRLI by checking back with FW at a later time to
see if the PRLI has finished. Instead, driver failed to push forward after
re-checking PRLI completion.

Fixes: ce0ba496 ("scsi: qla2xxx: Fix stuck login session")
Cc: stable@vger.kernel.org # 5.3
Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch does not change any any functionality.

Link: https://lore.kernel.org/r/20191217220617.28084-8-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds more details when D-Port diag async event is generated by
the firmware.

Link: https://lore.kernel.org/r/20191217220617.28084-7-hmadhani@marvell.comSigned-off-by: NJoe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

logout_on_delete flag should not be set if the topology is Loop. This patch
fixes unintentional logout during loop topology.

Link: https://lore.kernel.org/r/20191217220617.28084-6-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch removes unused qla2x00_async_logout_done from the code.

Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.comSigned-off-by: NShyam Sundar <ssundar@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch adds a shadow variable to hold disc_state history for the fcport
and prints state transition when the logging is enabled.

Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.comSigned-off-by: NShyam Sundar <ssundar@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

On timeout, SRB pointer was cleared from outstanding command array and
dropped.  It was not allowed to go through the done process and cleanup.
This patch will abort the SRB where FW will return it with an error status
and resume the normal cleanup.

Link: https://lore.kernel.org/r/20191217220617.28084-3-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qutran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During cable pull test case, if the port is disconnected for time larger
than devloss timeout, driver does not mark path offline.  In such case,
instead of notifying SCSI-ML of loop down, driver goes into endless loop of
device relogin because defer flag is set.

With newer handling of device relogin in driver discovery, defer flag is
now redundant. This patch removes defer flag and cleans up code handling
port lost indication to SCSI-ML.

Link: https://lore.kernel.org/r/20191217220617.28084-2-hmadhani@marvell.comSigned-off-by: NQuinn Tran <qtran@marvell.com>
Signed-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

These errors typically occur with swiotlb when the swiotlb buffer is full.
But they are transient and would typically unnecessarily worry a user.
Instead of errors, print debug messages.

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20191203193052.7583-2-thomas_os@shipmail.orgAcked-by: NJim Gill <jgill@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With swiotlb, the first byte of the sense buffer may in some cases be
uninitialized since we use DMA_FROM_DEVICE, and the device incorrectly
doesn't clear it. In those cases, clear it after DMA unmapping.

Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20191203193052.7583-1-thomas_os@shipmail.orgSuggested-by: NVishal Bhakta <vbhakta@vmware.com>
Acked-by: NJim Gill <jgill@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns:

../drivers/scsi/csiostor/csio_scsi.c:1386:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
         csio_lnodes_exit(hw, 1);
         ^
../drivers/scsi/csiostor/csio_scsi.c:1382:2: note: previous statement is
here
        if (*buf != '1')
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this
line.  Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: a3667aae ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/818
Link: https://lore.kernel.org/r/20191218014726.8455-1-natechancellor@gmail.comSigned-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns:

../drivers/scsi/aic7xxx/aic7xxx_core.c:2317:5: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
                        if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
                        ^
../drivers/scsi/aic7xxx/aic7xxx_core.c:2310:4: note: previous statement
is here
                        if (syncrate == &ahc_syncrates[maxsync])
                        ^
1 warning generated.

This warning occurs because there is a space amongst the tabs on this
line. Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

This has been a problem since the beginning of git history hence no fixes
tag.

Link: https://github.com/ClangBuiltLinux/linux/issues/817
Link: https://lore.kernel.org/r/20191218014220.52746-1-natechancellor@gmail.comSigned-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Clang warns:

../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
         if (ha->fw_dump)
         ^
../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is
here
        if (ha->queues)
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this
line.  Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: 068237c8 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure")
Link: https://github.com/ClangBuiltLinux/linux/issues/819
Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.comAcked-by: NManish Rangankar <mrangankar@marvell.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In ft_recv_write_data(), the pointer ep is dereferenced first and then
asserts for NULL. The patch removes the unnecessary assertion.

Link: https://lore.kernel.org/r/20191217212214.30722-1-pakki001@umn.eduReviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NAditya Pakki <pakki001@umn.edu>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warning:

drivers/scsi/initio.c:1643:5: warning: symbol 'initio_state_7' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20191217134309.41649-1-chenzhou10@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NChen Zhou <chenzhou10@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function ibmvscsis_send_messages:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1888:19: warning: variable iue set but not used [-Wunused-but-set-variable]
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function ibmvscsis_queue_data_in:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3806:8: warning: variable sd set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20191213064042.161840-1-chenzhou10@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NChen Zhou <chenzhou10@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix the typo "GPOI" -> "GPIO" in comment.

Link: https://lore.kernel.org/r/20191212023556.72618-1-chenzhou10@huawei.comSigned-off-by: NChen Zhou <chenzhou10@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This patch fixes the following compiler warning:

In file included from drivers/scsi/scsi_error.c:46:
drivers/scsi/scsi_error.c: In function 'scsi_eh_target_reset':
drivers/scsi/scsi_logging.h:65:81: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
   65 | LOGGING(SCSI_LOG_ERROR_SHIFT, SCSI_LOG_ERROR_BITS, LEVEL,CMD);
      |                                                              ^

drivers/scsi/scsi_error.c:1562:4: note: in expansion of macro 'SCSI_LOG_ERROR_RECOVERY'
 1562 |    SCSI_LOG_ERROR_RECOVERY(3,
      |    ^~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20191209174205.190025-1-bvanassche@acm.orgSigned-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Attach power off hook to Cadence UFS driver.

Link: https://lore.kernel.org/r/1576491432-631-1-git-send-email-sheebab@cadence.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: NSheeba B <sheebab@cadence.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Similar to suspend, ufshcd interrupt can be disabled since there won't be
any host controller transaction expected till clocks ungated.

Link: https://lore.kernel.org/r/1575721321-8071-3-git-send-email-stanley.chu@mediatek.comReviewed-by: NAsutosh Das <asutoshd@codeaurora.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During suspend flow, interrupt shall be disabled before disabling clocks to
avoid potential system hang due to accessing host registers after host
clocks are disabled.

For example, if an interrupt comes with IRQF_IRQPOLL flag configured with
the misrouted interrupt recovery feature enabled, ufshcd ISR may be
triggered even if nothing shall be done for UFS. In this case, system hang
may happen if UFS interrupt status register is accessed with host clocks
disabled.

Link: https://lore.kernel.org/r/1575721321-8071-2-git-send-email-stanley.chu@mediatek.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We know that "check_for_bkops" is non-zero on this side of the || because
it was checked on the other side.

Link: https://lore.kernel.org/r/20191213104935.wgpq2epaz6zh5zus@kili.mountainReviewed-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We introduced a few new error paths, but we can't return directly, we first
have to unlock "hba->clk_scaling_lock" first.

Fixes: a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Link: https://lore.kernel.org/r/20191213104828.7i64cpoof26rc4fw@kili.mountainReviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Backup L4 attributes duirng manual hibern8 entry and restore the L4
attributes on manual hibern8 exit as per JESD220C.

Link: https://lore.kernel.org/r/1575606303-10917-1-git-send-email-sheebab@cadence.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Tested-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NSheeba B <sheebab@cadence.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Delete unused structure field tr in structure utp_upiu_req, since no person
uses it for task management.

Fixes: df032bf2 ("scsi: ufs: Add a bsg endpoint that supports UPIUs")
Link: https://lore.kernel.org/r/20191205220912.5696-1-huobean@gmail.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since ufshcd irq resource is allocated with the device resource management
aware IRQ request implementation, we don't really need to free up irq
during suspend, disabling it during suspend and reenabling it during resume
should be good enough.

Link: https://lore.kernel.org/r/0101016ed3d69793-22918f99-23bf-495d-8a36-a9c108d1cbce-000000@us-west-2.amazonses.comReviewed-by: NStanley Chu <stanley.chu@mediatek.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During power mode change, PACP_PWR_Req frame sends PAPowerModeUserData
parameters (and they are considered valid by device if Flags[4] -
UserDataValid bit is set in the same frame).  Currently we don't set these
PAPowerModeUserData parameters and hardware always sets UserDataValid bit
which would clear all the DL layer timeout values of the peer device after
the power mode change.

This change sets the PAPowerModeUserData[0..5] to UniPro specification
recommended default values, in addition we are also setting the relevant
DME_LOCAL_* timer attributes as required by UFS HCI specification.

Link: https://lore.kernel.org/r/0101016ed3d688a4-cfaeb1c9-238b-46c4-9c89-d48c410ba325-000000@us-west-2.amazonses.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In queuecommand path, if DMA map fails, it bails out with clock held.  In
this case, release the clock to keep its usage paired.

[mkp: applied by hand]

Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.comReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

UFS standard requires DBD field to be set to 1 in MODE SENSE(10).

Some card vendors are more strict and check the DBD field, hence respond
with CHECK_CONDITION (Sense key set to ILLEGAL_REQUEST and ASC set to
INVALID FIELD IN CDB).  When host sends MODE SENSE for page caching, as a
result of the CHECK_CONDITION response, host assumes that the device
doesn't support the cache feature and doesn't send SYNCHRONIZE_CACHE
commands to flush the device cache. This can result in data corruption in
case of sudden power down when there is data stored in the device cache.

This patch fixes the DBD field setting as required in UFS standard.

Link: https://lore.kernel.org/r/0101016ed3d657e4-32a6dd52-1505-4312-97ff-2bd3bee59eb7-000000@us-west-2.amazonses.comReviewed-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

UFS JEDEC standards require DBD field to be set to 1 in mode sense
command.  This patch allows LLD to define the setting of DBD, if
required.

Link: https://lore.kernel.org/r/0101016ed3d643f9-ffd45d6c-c593-4a13-a18f-a32da3d3bb97-000000@us-west-2.amazonses.comReviewed-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In UFS host reset and restore path, before probe, we stop and start the
host controller once. After host controller is stopped, the pending
requests, if any, are cleared from the doorbell, but no completion IRQ
would be raised due to the hba is stopped.  These pending requests shall be
completed along with the first NOP_OUT command (as it is the first command
which can raise a transfer completion IRQ) sent during probe.  Since the
OCSs of these pending requests are not SUCCESS (because they are not yet
literally finished), their UPIUs shall be dumped. When there are multiple
pending requests, the UPIU dump can be overwhelming and may lead to
stability issues because it is in atomic context.  Therefore, before probe,
complete these pending requests right after host controller is stopped and
silence the UPIU dump from them.

Link: https://lore.kernel.org/r/1574751214-8321-5-git-send-email-cang@qti.qualcomm.comReviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: NBean Huo <beanhuo@micron.com>
Tested-by: NBean Huo <beanhuo@micron.com>
Signed-off-by: NCan Guo <cang@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>