scsi: lpfc: Fix missing check for CSF in Write Object Mbox Rsp

When the WriteObject mailbox response has change_status set to is 0x2
(Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also
be checked to see if a fw reset is sufficient to enable all new features in
the updated firmware image. If not, a fw reset would start the new
firmware, but with a feature level equal to existing firmware.  To enable
the new features, a chip reset/pci slot reset would be required.

Check the CSF bit when change_status is 0x2 or 0x4 to know whether to
perform a pci bus reset or fw reset.

Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_hw4.h

@@ -3925,6 +3925,9 @@ struct lpfc_mbx_wr_object {
 #define LPFC_CHANGE_STATUS_FW_RESET		0x02
 #define LPFC_CHANGE_STATUS_PORT_MIGRATION	0x04
 #define LPFC_CHANGE_STATUS_PCI_RESET		0x05
+#define lpfc_wr_object_csf_SHIFT		8
+#define lpfc_wr_object_csf_MASK			0x00000001
+#define lpfc_wr_object_csf_WORD			word5
 		} response;
 	} u;
 };

drivers/scsi/lpfc/lpfc_sli.c

@@ -19449,7 +19449,7 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 	struct lpfc_mbx_wr_object *wr_object;
 	LPFC_MBOXQ_t *mbox;
 	int rc = 0, i = 0;
-	uint32_t shdr_status, shdr_add_status, shdr_change_status;
+	uint32_t shdr_status, shdr_add_status, shdr_change_status, shdr_csf;
 	uint32_t mbox_tmo;
 	struct lpfc_dmabuf *dmabuf;
 	uint32_t written = 0;
@@ -19506,6 +19506,16 @@ lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
 	if (check_change_status) {
 		shdr_change_status = bf_get(lpfc_wr_object_change_status,
 					    &wr_object->u.response);
+
+		if (shdr_change_status == LPFC_CHANGE_STATUS_FW_RESET ||
+		    shdr_change_status == LPFC_CHANGE_STATUS_PORT_MIGRATION) {
+			shdr_csf = bf_get(lpfc_wr_object_csf,
+					  &wr_object->u.response);
+			if (shdr_csf)
+				shdr_change_status =
+						   LPFC_CHANGE_STATUS_PCI_RESET;
+		}
+
 		switch (shdr_change_status) {
 		case (LPFC_CHANGE_STATUS_PHYS_DEV_RESET):
 			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,